Orbit 58910 2-Outlet Programmable Digital Hose Watering Timer

تعارف

The Orbit 58910 2-Outlet Programmable Digital Hose Watering Timer is designed to automate your watering schedule, providing efficient and convenient irrigation for your lawn and garden. This device connects directly to your outdoor hose faucet and allows you to set precise watering times, durations, and frequencies for two independent outlets. Its user-friendly interface and durable construction ensure reliable performance and water conservation.

سيٽ اپ ڪريو

1. بيٽري لڳائڻ

The timer requires two (2) AA alkaline batteries (not included). To install, locate the battery compartment on the back of the timer. Slide the battery cover off, insert the batteries according to the polarity indicators (+/-), and then replace the cover securely. The timer retains its program settings even when batteries are changed.

2. Connecting the Timer to Faucet

Before connecting, ensure the faucet is clean and free of debris. Thread the timer's swivel coupling onto your outdoor hose faucet. Hand-tighten until snug. Do not overtighten. The swivel coupling allows for easy and secure attachment without the need for tools.

The swivel coupling provides a quick and secure connection to your hose or faucet, and includes a mesh filter to prevent debris from entering the timer.

3. نلين کي ڳنڍڻ

Attach your garden hoses to the two independent outlets at the bottom of the timer. Hand-tighten each hose connection. Ensure all connections are secure to prevent leaks. Once connected, slowly turn on your faucet to full pressure.

The Orbit 58910 timer with its digital display and two hose outlets, ready for connection.

آپريٽنگ هدايتون

The Orbit 58910 timer features a large LCD screen and an intuitive dial for easy programming. Use the dial to navigate through settings and the '+' and '-' buttons to adjust values.

The timer is designed for ease of use with its large digital display and intuitive dial.

1. ڪلاڪ کي جوڙڻ

1. ڊائل کي ڦيرايو گھڙي سيٽ ڪريو.
2. Use the '+' and '-' buttons to set the current time, including AM/PM.
3. کي دٻايو اسٽيشن button to toggle between outlets if programming them individually, or to confirm the time.

2. Setting Start Time

1. ڊائل کي ڦيرايو شروع وقت.
2. Use the '+' and '-' buttons to set the desired start time for watering.
3. کي دٻايو اسٽيشن button to select the outlet (1 or 2) you wish to program. Repeat for the second outlet if needed.

3. Setting Watering Duration (How Long)

1. ڊائل کي ڦيرايو ڪيستائين.
2. Use the '+' and '-' buttons to set the watering duration from 1 to 240 minutes (4 hours) per outlet.
3. کي دٻايو اسٽيشن button to select the outlet (1 or 2) you wish to program. Repeat for the second outlet if needed.

Set your timer to water anywhere from 1-240 minutes (4 hours) per each outlet.

4. Setting Watering Frequency (How Often)

1. ڊائل کي ڦيرايو گهڻا ڀيرا.
2. Use the '+' and '-' buttons to set the watering frequency. Options include every 6 hours, 12 hours, or from once a day up to once every 7 days.
3. کي دٻايو اسٽيشن button to select the outlet (1 or 2) you wish to program. Repeat for the second outlet if needed.

Water frequencies can be set to every 6 hours, 12 hours, or from once a day up to once every 7 days.

5. خودڪار آپريشن

After setting your desired program, turn the dial to آٽو. The timer will now operate according to your programmed schedule. The display will show the current time and indicate when the next watering cycle is scheduled.

6. دستي آپريشن

To manually water without interrupting your programmed schedule, press the دستور/ صاف button. Use the '+' and '-' buttons to set the desired manual watering duration. Press اسٽيشن to select the outlet. The timer will water for the set duration and then return to its programmed schedule.

7. Rain Delay Feature

To pause your watering schedule due to rain, turn the dial to آٽو and then press and hold the '+' button for 3 seconds. The display will show 'DELAY' and allow you to select a delay period of 24, 48, or 72 hours using the '+' and '-' buttons. The timer will resume its programmed schedule after the delay period ends.

Save water by skipping watering cycles after it rains without interrupting your set program. Set a rain delay from 1-3 days.

8. ٽائمر بند ڪرڻ

سڀني پاڻي ڏيڻ وارن پروگرامن کي بند ڪرڻ لاءِ، ڊائل کي ان طرف ڦيرايو بند. هي سڀ خودڪار ۽ دستي پاڻي ڏيڻ جا چڪر بند ڪري ڇڏيندو.

سار سنڀال

بيٽري مٽائڻ

When the battery indicator on the display shows low power, replace the batteries promptly to ensure continuous operation. Follow the battery installation steps outlined in the Setup section. The timer's program will be retained during battery replacement.

فلٽر جي صفائي

Periodically check the mesh filter located in the swivel coupling that connects to your faucet. If debris accumulates, remove the timer from the faucet, carefully remove the filter, rinse it under running water, and reinsert it. This helps maintain proper water flow and prevents clogging.

سياري ڪرڻ

Before the first frost, disconnect the timer from the faucet and hoses. Remove the batteries. Store the timer indoors in a dry, protected area where temperatures will not drop below freezing. Freezing water inside the timer can cause damage.

مشڪلاتون

• پاڻي جو وهڪرو ناهي:
  • Ensure the faucet is fully open.
  • Check if the mesh filter is clogged and clean it if necessary.
  • Verify that the watering duration is set to a value greater than zero.
  • Check battery level; replace if low.
• Timer Not Activating:
  • Confirm the dial is set to آٽو.
  • Check the start time and frequency settings to ensure they are correctly programmed.
  • پڪ ڪريو ته بيٽري تازيون آهن ۽ صحيح طور تي نصب ٿيل آهن.
• Display is Blank or Faint:
  • بيٽرين کي نئين AA الڪائن بيٽرين سان تبديل ڪريو.
• Water Leaks from Connections:
  • Ensure all connections (faucet to timer, timer to hose) are hand-tightened securely.
  • Check for worn or missing rubber washers in the connections and replace if necessary.
• Timer Not Responding to Buttons:
  • Remove and reinsert batteries to reset the timer.
  • If issues persist, contact Orbit customer support.

وضاحتون

وارنٽي ۽ سپورٽ

The Orbit 58910 2-Outlet Programmable Digital Hose Watering Timer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Orbit website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Orbit customer service directly.

You can find more information and support resources on the official Orbit webسائيٽ: www.orbitonline.com