1. پراڊڪٽ ختمview
The ASUS TUF SABERTOOTH 990FX R2.0 is an ATX motherboard designed for AMD Socket AM3+ processors, supporting up to 8-core AMD FX Series CPUs and compatible with previous generation AM3 processors. This motherboard emphasizes stability, compatibility, and durability, ensuring reliable operation under various conditions.
Key features include CeraM!X premium ceramic-coating technology for enhanced heat dissipation, TUF Thermal Radar with 10 hardware sensors for real-time thermal detection, and DIGI+ Power Control for precise CPU and DRAM voltage regulation. It also incorporates ASUS E.S.P. for efficient power switching, MemOK! for memory boot compatibility, and ESD Guards for component protection. The board supports Quad-GPU SLI and Quad-GPU CrossFireX for multi-GPU configurations and utilizes military-standard TUF capacitors, chokes, and MOSFETs for extended lifespan.
2. سيٽ اپ ۽ تنصيب
2.1. CPU Installation (Socket AM3+)
Carefully align your AMD AM3+ processor with the motherboard socket. Ensure the CPU is correctly oriented before gently lowering it into place. Close the retention lever to secure the CPU.
2.2. رام انسٽاليشن (DDR3)
This motherboard supports DDR3 memory. Open the clips on the DIMM slots. Align the memory module's notch with the slot's key and press down firmly on both ends until the clips snap into place. Refer to the motherboard layout for recommended dual-channel configurations.
2.3. Storage Device Installation (SATA 6Gb/s)
Connect your SATA 6Gb/s storage devices (HDDs, SSDs) to the available SATA ports on the motherboard using SATA data cables. Ensure power cables from your power supply are also connected to the devices.
2.4. ايڪسپينشن ڪارڊ انسٽاليشن (PCIe)
Insert your PCI Express expansion cards (e.g., graphics cards, sound cards) into the appropriate PCIe slots. Press down firmly until the card is seated correctly and secure it with a screw to the chassis.
2.5. بجلي رابطا
Connect the 24-pin ATX main power connector and the 8-pin ATX 12V power connector from your power supply to the corresponding sockets on the motherboard.
2.6. فرنٽ پينل ڪنيڪشن
Connect the front panel headers (power button, reset button, HDD LED, power LED, USB ports, audio jacks) from your chassis to the corresponding pins on the motherboard. Refer to the motherboard manual for exact pin assignments.
3. آپريٽنگ هدايتون
3.1. BIOS/UEFI ترتيب
Upon initial boot, press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility. Here you can configure boot order, system time, and various hardware settings. The DIGI+ Power Control allows for advanced power management and tuning.
3.2. ڊرائيور لڳائڻ
After installing your operating system, install all necessary drivers from the provided support DVD or the ASUS website. This includes chipset drivers, audio drivers, LAN drivers, and any other peripheral drivers to ensure optimal system performance.
3.3. سسٽم مانيٽرنگ
Utilize the TUF Thermal Radar software to monitor real-time thermal conditions across 10 hardware sensors on the motherboard. This allows for customized cooling settings and proactive thermal management.
4. سار سنڀال
4.1. مٽي صاف ڪرڻ
Regularly clean dust from the motherboard and cooling components using compressed air. Ensure the system is powered off and unplugged before cleaning.
4.2. BIOS اپڊيٽس
وقتي طور تي ASUS سپورٽ چيڪ ڪريو webBIOS/UEFI اپڊيٽس لاءِ سائيٽ. BIOS کي اپڊيٽ ڪرڻ سان سسٽم جي استحڪام، مطابقت ۽ ڪارڪردگي بهتر ٿي سگهي ٿي. اپڊيٽ جي عمل دوران ASUS پاران ڏنل هدايتن تي احتياط سان عمل ڪريو.
4.3. اجزاء جي چڪاس
Ensure all cables and components are securely seated. Loose connections can lead to system instability or non-functionality.
5. مسئلا حل ڪرڻ
5.1. System Not Booting
- تصديق ڪريو ته مدر بورڊ سان سڀئي پاور ڪنيڪشن ۽ جزا محفوظ آهن.
- چيڪ ڪريو ته سي پي يو ۽ رام صحيح طرح سان نصب ٿيل آهن.
- استعمال ڪريو MemOK! button on the motherboard to resolve memory compatibility issues if the system fails to boot due to RAM.
- Ensure the graphics card is properly seated and connected to power, if applicable.
5.2. پردي جي سڃاڻپ جا مسئلا
- پڪ ڪريو ته سڀئي ڊرائيور صحيح طرح سان نصب ٿيل ۽ جديد آهن.
- Check USB and SATA connections for proper seating.
- Test peripherals on different ports to rule out faulty ports.
5.3. سسٽم جي عدم استحڪام/حادثا
- Monitor system temperatures using TUF Thermal Radar to check for overheating.
- Ensure adequate cooling and airflow within the PC case.
- Verify RAM stability using diagnostic tools.
- Check for the latest BIOS/UEFI firmware and update if necessary.
The motherboard features ESD Guards to protect components from electrostatic discharge, which can help prevent certain types of hardware failures.
6. وضاحتون
| خاصيت | تفصيل |
|---|---|
| برانڊ | ASUS |
| سلسلو | SABERTOOTH 990FX R2.0 |
| ماڊل نمبر | SABERTOOTH 990FX R2.0 |
| سي پي يو ساکٽ | ساکٽ AM3+ |
| مطابقت رکندڙ پروسيسر | AMD FX Series (up to 8-core), AMD Athlon, AMD Sempron |
| چپ سيٽ جو قسم | AMD 990FX |
| رام ميموري ٽيڪنالاجي | DDR3 SDRAM |
| وڌ ۾ وڌ رام سپورٽ ٿيل | 32 GB DDR3 |
| ياداشت جي رفتار | 2666 MHz تائين |
| SATA بندرگاهن | SATA 6Gb/s |
| USB 2.0 بندرگاهن | 2 (rear panel) + internal headers |
| USB 3.0 بندرگاهن | 2 (rear panel) + internal headers |
| پيداوار جي ماپ (LxWxH) | 10.47 x 2.99 x 13.03 انچ |
| شيءِ جو وزن | 4.45 پائونڊ |
7. پراڊڪٽ بصري
7.1. پراڊڪٽ جون تصويرون
7.2. سرڪاري پراڊڪٽ وڊيوز
هي وڊيو هڪ عام جائزو پيش ڪري ٿوview of the product, highlighting its design and features. It is an official product video from the seller.
8. وارنٽي ۽ سپورٽ
For detailed warranty information, please refer to the official ASUS website or the documentation included with your purchase. Product support, including driver downloads and further troubleshooting guides, can also be found on the official ASUS support portal.
Please note the legal disclaimer: "Item is nonrefundable once purchased. Still has original packaging." This information is provided by the seller and may pertain to specific purchase conditions.
