تعارف
This manual provides essential information for the proper installation, operation, and maintenance of your Whelen PAR-46 Super-LED Steady Burn 8-DEGREE Spot Light. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
The Whelen PAR-46 Replacement LED Lighthead is specifically designed as a direct drop-in replacement for traditional halogen lamps in Unity Spotlights. It offers a lightweight, low-current, and water-resistant solution, engineered for stable light output over an extended operational lifespan.
حفاظت جي ڄاڻ
پيداوار کي نقصان يا زخم کان بچڻ لاءِ هميشه هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو:
- Ensure the vehicle's power is disconnected before installation or maintenance.
- Do not look directly into the light when it is illuminated, as it can cause eye strain or damage.
- Verify correct polarity during wiring to prevent damage to the LED unit.
- انسٽاليشن دوران مناسب ذاتي حفاظتي سامان (PPE) استعمال ڪريو.
- Refer to local and national electrical codes for proper wiring practices.
پيداوار ختمview
This image displays the front of the Whelen PAR-46 Super-LED light, featuring its clear, durable lens and the array of individual LED elements designed for optimal light output. The black housing is visible around the perimeter.
The PAR-46 Super-LED light is engineered for high performance and durability. Key features include:
- اعلي روشني: 1600 Lumens output.
- آسان تنصيب: Designed for quick drop-in replacement.
- EMI Certified: SAE J1113-42 Class 5 EMI certified.
- گھٽ پاور واپرائڻ: Operates at 12 VDC, drawing only 2.3 ampايس (30 واٽ).
- ڊگھي عمر: Rated for 50,000 hours of operation.
- پائيدار تعمير: Features a heavy-duty black powder coated die-cast aluminum heatsink.
سيٽ اپ ۽ تنصيب
The Whelen PAR-46 Super-LED light is designed for a straightforward drop-in installation.
- تياري: Ensure the vehicle's power system is completely turned off and disconnected to prevent electrical shock or damage.
- پراڻي روشني هٽايو: Carefully remove the existing PAR-46 halogen lamp from its housing, typically found in Unity Spotlights.
- وائرنگ ڳنڍڻ: Connect the wiring of the new Whelen PAR-46 Super-LED light to the vehicle's power supply. Observe correct polarity: typically, red wire for positive (+) and black wire for negative (-). Secure all connections.
- Insert New Light: Gently insert the Whelen PAR-46 Super-LED light into the housing. Ensure it seats properly and is securely fastened.
- ٽيسٽ ڪارڪردگي: Reconnect the vehicle's power and test the light's operation. Verify that the light illuminates correctly and consistently.
نوٽ: Professional installation is recommended if you are unfamiliar with automotive electrical systems.
آپريٽنگ هدايتون
The Whelen PAR-46 Super-LED Spot Light operates as a steady burn light.
- پاور آن / آف: The light is controlled by the vehicle's existing spotlight switch or a dedicated push-button switch connected to its power source. Activate the switch to turn the light on, and deactivate to turn it off.
- بيم جي هدايت: Adjust the spotlight housing as needed to direct the 8-degree spot beam to the desired area.
نوٽ: This light is designed for steady illumination and does not feature flashing or pattern modes.
سار سنڀال
The Whelen PAR-46 Super-LED light is designed for minimal maintenance due to its long lifespan and durable construction.
- صفائي: وقتي طور تي لينس کي نرم، ڊي سان صاف ڪريوamp cloth and mild soap solution to remove dirt and debris. Avoid abrasive cleaners or solvents that could damage the lens.
- چڪاس: Regularly inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
- گرمي جو انتظام: The integrated heatsink is designed to dissipate heat. Ensure the area around the light housing allows for adequate airflow.
No user-serviceable parts are inside the sealed LED unit. Do not attempt to disassemble the light.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| روشني نٿي چمڪي. | No power to the light; incorrect wiring; faulty switch; blown fuse. | Check power connections and ensure they are secure. Verify correct polarity. Test the switch and vehicle fuse. |
| روشني ٽمڪي رهي آهي يا مدھم آهي. | Loose connection; insufficient voltage; damaged wiring. | Inspect all wiring connections for tightness. Ensure the vehicle's electrical system provides stable 12 VDC. Check for any damaged wires. |
| Light housing feels excessively hot. | Restricted airflow around heatsink; prolonged operation in high ambient temperatures. | Ensure the heatsink is not obstructed. While designed for heat dissipation, prolonged use in extreme conditions may cause warmth. This is generally normal for high-power LEDs. |
If troubleshooting steps do not resolve the issue, contact Whelen customer support or a qualified technician.
وضاحتون
| ماڊل نمبر | P46FLC |
| برانڊ | ويلن |
| روشني جو ذريعو قسم | ايل اي ڊي |
| روشني | 1600 Lumens |
| جلدtage | 12 وي ڊي سي |
| موجوده ڊرا | 2.3 Amps |
| واتtage | 30 واٽ |
| ڄمار | 50,000 ڪلاڪن لاءِ درجه بندي ڪئي وئي |
| مواد | Aluminum (Heatsink) |
| ختم ڪر | پائوڊر ڪوٽيڊ (ڪارو) |
| پاڻي جي مزاحمت | پاڻي مزاحمتي |
| انسٽاليشن جو قسم | اُڏائڻ |
| سرٽيفڪيشن | SAE J1113-42 Class 5 EMI certified |
| شيءِ جو وزن | 1 پائونڊ |
| پيڪيج جي ماپ | 6 x 5.3 x 1.9 انچ |
وارنٽي ڄاڻ
The Whelen PAR-46 Super-LED Spot Light comes with a 5 سال وارنٽي. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي.
For detailed warranty terms and conditions, or to make a warranty claim, please refer to the official Whelen webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سپورٽ سان رابطو ڪريو. وارنٽي جي تصديق لاءِ خريداري جو ثبوت رکو.
ڪسٽمر سپورٽ
For technical assistance, product inquiries, or support, please contact Whelen Engineering customer service.
- ٺاهيندڙ: ويلن انجنيئرنگ
- Webسائيٽ: www.whelen.com (مهرباني ڪري سرڪاري ويب سائيٽ جو دورو ڪريو) web(تازه ترين رابطي جي معلومات لاءِ سائيٽ.)
