HECHT-45 Gasoline Chainsaw User Manual

1. اهم حفاظتي ڄاڻ

Always read and understand this manual before operating the HECHT-45 chainsaw. Failure to follow safety instructions can result in serious injury or death. Keep this manual for future reference.

• Wear appropriate personal protective equipment (PPE) including a helmet, eye protection, hearing protection, gloves, and safety boots.
• پڪ ڪريو ته ڪم واري جڳهه ماڻهن، ٻارن ۽ پالتو جانورن کان خالي هجي.
• ٿڪجي پوڻ تي، شراب، منشيات، يا دوائن جي اثر هيٺ زنجير نه هلايو.
• Inspect the chainsaw before each use for damaged parts, loose fasteners, or fuel leaks.
• هميشه ٻنهي هٿن سان زنجير کي مضبوطيءَ سان پڪڙيو.

2. سيٽ اپ ۽ اسيمبلي

2.1 کولڻ

Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. Retain packaging for potential future transport or storage.

2.2 بار ۽ زنجير جي انسٽاليشن

The guide bar and saw chain must be installed before initial operation.

1. Remove the chain brake cover by loosening the two nuts.
2. Place the saw chain around the sprocket and guide bar, ensuring the cutting edges face forward on the top side of the bar.
3. گائيڊ بار کي اسٽڊس تي لڳايو، زنجير ٽينشنر پن کي گائيڊ بار ۾ سوراخ سان ترتيب ڏيو.
4. Replace the chain brake cover and lightly tighten the nuts.
5. Adjust chain tension using the tensioning screw. The chain should be snug against the guide bar but still able to be pulled freely by hand.
6. Fully tighten the two nuts to secure the chain brake cover and guide bar.

تصوير: هڪ ويجهو تصوير view of the chainsaw's guide bar and chain, showing the 'HECHT made for garden' branding on the bar. This illustrates the components involved in cutting.

تصوير: هڪ تفصيلي view of the chain brake mechanism and the chain tensioning area on the chainsaw. This highlights the safety and adjustment features.

2.3 Fuel and Oil Preparation

The HECHT-45 uses a 2-stroke engine and requires a specific fuel mixture and chain lubricant.

• ٻارڻ جو مرکب: Mix unleaded gasoline with high-quality 2-stroke engine oil at the ratio specified in the engine manual (typically 25:1 or 50:1, refer to your specific engine instructions). Use a clean fuel container.
• زنجير جو تيل: Fill the chain oil reservoir with biodegradable chain lubricant. This lubricates the chain and guide bar during operation. Do not use waste oil.

3. آپريٽنگ هدايتون

3.1 آپريشن کان اڳ جا چيڪ

• Check fuel and chain oil levels.
• پڪ ڪريو ته زنجير جي ٽينشن صحيح آهي.
• Ensure the chain brake is functioning correctly.
• Inspect the air filter for cleanliness.

3.2 انجڻ شروع ڪرڻ

Follow these steps for starting the HECHT-45 engine:

1. زنجير کي مضبوط، هموار مٿاڇري تي رکو.
2. Engage the chain brake by pushing the hand guard forward.
3. Push the primer bulb several times until fuel is visible.
4. Set the choke lever to the 'closed' position (for cold start).
5. Pull the starter cord firmly and steadily until the engine fires briefly.
6. Once the engine fires, move the choke lever to the 'open' position.
7. Pull the starter cord again until the engine starts and runs.
8. Allow the engine to warm up for a few moments before disengaging the chain brake and beginning operation.

Image: A close-up of the chainsaw's trigger handle and the translucent primer bulb, essential for fuel delivery during starting.

تصوير: هڪ تفصيلي view of the starter pull handle on the chainsaw, along with a sticker indicating a noise level of 113 dB.

3.3 حفاظتي خاصيتون

• زنجير بريڪ: The chain brake/hand guard stops the chain within milliseconds during kickback, providing crucial protection. Always ensure it is functional.
• Anti-Vibration System: The anti-vibration system absorbs impacts and reduces user fatigue during extended operation.

Image: A close-up of the chainsaw's top handle, showing various safety warning stickers. This emphasizes the importance of safety precautions during use.

3.4 ڪٽڻ جون ٽيڪنڪون

Always maintain a stable stance and firm grip. Plan your cuts to avoid kickback. Do not cut above shoulder height. Be aware of falling branches and logs.

4. سار سنڀال

Regular maintenance ensures optimal performance and extends the lifespan of your HECHT-45 chainsaw.

4.1 Daily/Regular Maintenance

• صفائي: Clean the chainsaw after each use, removing sawdust, debris, and oil residue.
• زنجير تيز ڪرڻ: Sharpen the saw chain regularly to maintain cutting efficiency and safety. Refer to specific chain sharpening guidelines.
• زنجير لوڻ: Ensure the automatic chain oiler is functioning and the oil reservoir is filled.

4.2 وقتي سار سنڀال

• ايئر فلٽر: مناسب انجن جي ڪارڪردگي کي يقيني بڻائڻ لاءِ ضرورت مطابق ايئر فلٽر کي صاف ڪريو يا تبديل ڪريو.
• اسپارڪ پلگ: اسپارڪ پلگ جو معائنو ڪريو ۽ صاف ڪريو. جيڪڏهن اهو ڳريل يا گندو آهي ته ان کي تبديل ڪريو.
• ٻارڻ فلٽر: Check and clean or replace the fuel filter periodically.

4.3 اسٽوريج

For long-term storage, drain the fuel tank and run the engine until it stops to clear the carburetor. Clean the chainsaw thoroughly and store it in a dry, secure location away from children.

5. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your HECHT-45 chainsaw.

6. وضاحتون

Key technical specifications for the HECHT-45 gasoline chainsaw:

7. وارنٽي ۽ سپورٽ

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Hecht dealer. For technical support or spare parts inquiries, please reach out to the manufacturer's customer service department.