Saxby Omega 1W LED Motion Sensor Bathroom Mirror Light with Shaver Socket & Shelf

1. پراڊڪٽ ختمview

The Saxby Omega Bathroom Mirror is a modern, energy-efficient lighting solution designed for bathroom environments. It integrates a 1W LED light, a motion sensor for convenient operation, and a built-in shaver socket, all within a mirrored glass and matt silver frame. This product also features a practical shelf for bathroom essentials.

شڪل 1: سامهون view of the Saxby Omega Bathroom Mirror, showcasing its sleek design, integrated LED lights at the top, and a glass shelf with a shaver socket below.

2. حفاظت جي ڄاڻ

مھرباني ڪري انسٽاليشن ۽ استعمال کان اڳ سڀ ھدايتون احتياط سان پڙھو. مستقبل جي حوالي لاءِ ھن دستور کي برقرار رکو.

• برقي حفاظت: Installation must be carried out by a qualified electrician in accordance with current wiring regulations (e.g., IEE Wiring Regulations). Ensure the mains supply is switched off at the consumer unit/fuse board before commencing installation or maintenance.
• باٿ روم زونز: This product is rated IP44, making it suitable for bathroom zone 2. It can be used in bathroom zone 1 if installed in conjunction with a 30mA RCD (Residual Current Device). Do not install in zone 0.
• سنڀالڻ: The mirror is made of glass. Handle with care to prevent breakage and injury.
• صفائي: Always disconnect power before cleaning. Use only a soft, dry cloth. Avoid abrasive cleaners or solvents.
• وينٽيليشن: Ensure adequate ventilation around the unit as per installation guidelines.

شڪل 2: بند اپ view highlighting the IP44 rating and the integrated shaver socket, indicating suitability for specific bathroom zones.

3. پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي.

• Saxby Omega Bathroom Mirror Unit (with integrated LED, motion sensor, shaver socket, and shelf)
• Installation Fixings (screws, wall plugs)
• ھدايت وارو دستور

4. سيٽ اپ ۽ تنصيب

Installation should only be performed by a qualified electrician. Ensure the mounting surface is suitable to support the weight of the mirror (approximately 6.95 kg).

1. تياري: Switch off the main electrical supply at the consumer unit/fuse board. Identify the desired mounting location, ensuring it is within the appropriate bathroom zone and away from direct water spray.
2. نشان لڳائڻ: Carefully mark the drilling points on the wall using the mirror's mounting brackets as a template.
3. سوراخ ڪرڻ: Drill holes at the marked points, ensuring not to damage any hidden wiring or pipes. Insert appropriate wall plugs.
4. وائرنگ: Connect the mirror's electrical wiring to the mains supply according to the wiring diagram provided with the product and local electrical regulations. Ensure all connections are secure and insulated.
5. چڙهڻ: Secure the mirror to the wall using the provided fixings. Ensure it is level and firmly attached.
6. فائنل چيڪ: Once installed, switch the main electrical supply back on and test the mirror's functions.

شڪل 3: سائڊ پروfile of the mirror illustrating its projection from the wall and the location of the shaver socket. Dimensions are H: 500mm, W: 390mm, Proj: 160mm.

5. آپريٽنگ هدايتون

• LED روشني: The mirror features integrated 1W LED lights (2 x 1W LED capsule, cool white). These lights are activated by the motion sensor.
• Motion Sensor (IR Switch): The mirror is equipped with an infrared (IR) motion sensor. To activate the light, simply wave your hand within the sensor's detection range (typically 5-10 cm) in front of the sensor area. Wave again to turn off the light.
• شيور ساکٽ: The built-in shaver socket is designed for use with electric shavers and electric toothbrushes. Ensure the appliance is compatible with the socket's voltage and current rating before use. Do not use for high-power appliances.
• مربوط شيلف: The glass shelf provides a convenient storage space for small bathroom items. Do not overload the shelf.

6. سار سنڀال

Regular maintenance will ensure the longevity and appearance of your mirror.

• آئيني جي صفائي: Disconnect power before cleaning. Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror surface, to avoid liquid ingress into electrical components.
• Cleaning the Shelf: The glass shelf can be cleaned with a damp ڪپڙو ۽ نرم صابڻ. چڱي طرح سڪي.
• عام سنڀال: Do not use harsh chemicals, abrasive materials, or scouring pads, as these can damage the mirror finish or electrical components.

Figure 4: Detail of the integrated glass shelf and the robust construction from glass and steel materials.

7. مسئلا حل ڪرڻ

If you encounter issues with your Saxby Omega Mirror, refer to the following common problems and solutions:

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Saxby Lighting directly through their official webسائيٽ يا ڪسٽمر سروس چينلز. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

سرڪاري Webسائيٽ: www.saxbylighting.com