1. پراڊڪٽ ختمview
The SunSun HW-404B is a 5-stage external canister filter designed for aquariums up to 150 gallons. It provides comprehensive mechanical, chemical, and biological filtration, processing up to 525 gallons per hour. This model includes an integrated 9-watt UV sterilizer to assist in controlling algae spores and bacteria, contributing to clearer water. The filter features a self-priming pump for simplified startup.

Figure 1: SunSun HW-404B External Canister Filter product packaging.
2. حفاظتي هدايتون
- Always disconnect power to the filter and any other aquarium equipment before performing maintenance or handling the unit.
- Ensure the filter is placed on a stable, level surface below the aquarium water level to facilitate proper operation and priming.
- Do not operate the UV sterilizer if the UV lamp is damaged or exposed. Direct exposure to UV light can be harmful to eyes and skin.
- Verify all hose connections are secure to prevent leaks.
- هي اوزار صرف اندروني استعمال لاء آهي.
- Refer to the user manual provided in the product details section for information regarding product assembly, usage, and troubleshooting.
3. پيڪيج مواد
احتياط سان سڀني حصن کي کوليو ۽ تصديق ڪريو ته ھيٺيون شيون شامل آھن:
- SunSun HW-404B Canister Filter Unit
- Filter Pads (various grades for mechanical filtration)
- Hoses (Inlet and Outlet)
- Input and Output Devices (Spray Bar, Input Bar, etc.)
- UV ايلamp (9 ڊبليو)
- Flexible Media Trays (4 units)
- Connection Accessories (Suction Cups, Clamps، وغيره)

Figure 2: Diagram illustrating the various components included with the filter.
4. سيٽ اپ جون هدايتون
شروعاتي سيٽ اپ ۽ انسٽاليشن لاءِ انهن قدمن تي عمل ڪريو:
- فلٽر هيڊ تيار ڪريو: Unclip the buckles (1) and (2) from the main body of the filter. Carefully lift the filter head to separate it from the base.
- فلٽر ميڊيا انسٽال ڪريو: The four flexible media trays allow for customized filtration. Place coarse filter pads in the bottom tray, followed by finer pads. Add chemical or biological media (e.g., activated carbon, ceramic rings, bio-balls, sold separately) to the upper trays as desired. Ensure media is arranged to allow water flow from bottom to top.
- Reassemble and Connect Hoses: Secure the filter head back onto the main body. Push the inlet and outlet taps into the filter head and fasten using the screw caps. Attach the hoses to each tap and secure them.
- Connect to Aquarium: According to the provided diagram, attach the input downpipes and output spray bars to the hoses and position them within your aquarium. Ensure hoses are cut to appropriate lengths to avoid kinks or sags.
- فلٽر کي پرائم ڪرڻ: The HW-404B features a self-priming pump. Fill the canister with aquarium water to the top of the upper tray before attaching the head. Press the blue primer button several times until water begins to flow through the hoses. Once water is flowing, plug in the filter. Gently rock the unit side to side to release any trapped air.
- UV Sterilizer Activation: The switch for the 9W UV sterilizer is located on the side of the filter head. Turn it on if desired. A small indicator light confirms operation.

Figure 3: Visual guide for filter operation and UV lamp متبادل.

Figure 4: The SunSun HW-404B filter unit with inlet and outlet hoses connected.
5. آپريٽنگ هدايتون
Once installed and primed, the filter will begin circulating and filtering aquarium water. The UV sterilizer can be operated independently.
- پاور آن / آف: Plug the filter into a suitable power outlet to begin operation. Unplug to turn off.
- UV Sterilizer: The 9W UV sterilizer can be switched on or off as needed. It is effective for controlling free-floating algae and bacteria. Continuous 24/7 operation is generally not required and may reduce the lifespan of the UV lamp and potentially degrade plastic components over extended periods. Consult aquarium care guidelines for optimal UV usage.
- وهڪري جي شرح: The filter is rated for 525 GPH (2000 L/hr) without media and at zero head pressure. Actual flow rates will vary depending on the amount and type of filter media used, hose length, and height difference between the filter and the aquarium.
6. سار سنڀال
باقاعده سار سنڀال توهان جي فلٽر جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائي ٿي.
6.1 فلٽر کي صاف ڪرڻ
- بجلي بند ڪريو: Always unplug the filter from the power outlet before cleaning.
- Turn Off During Water Changes: To prevent the filter from running dry and requiring re-priming, turn it off during aquarium water changes.
- جدا ڪرڻ: Close the inlet/outlet valves, disconnect the hoses, and unclip the filter head.
- Clean Media Trays: Remove the media trays. Clean mechanical filter pads by rinsing them gently in a bucket of old aquarium water (not tap water, to preserve beneficial bacteria). Clean biological media lightly if necessary, also using old aquarium water.
- صاف امپيلر: Inspect and clean the impeller and its housing for any debris or blockages.
- O-Ring Maintenance: Inspect the main O-ring on the filter head for wear or damage. Apply a thin layer of silicone lubricant (e.g., Vaseline) to the O-ring to maintain a good seal and ease of removal/insertion.
- ٻيهر گڏ ڪرڻ: Reassemble the filter in reverse order, ensuring all trays are correctly seated and the head is securely clipped.
6.2 UV Lamp بدلائڻ
يو وي ايلamp has a limited lifespan and should be replaced periodically (typically every 6-12 months) to maintain effectiveness.
- بجلي بند ڪريو: Ensure the filter is unplugged.
- Access UV Chamber: Refer to the diagram (Figure 3) for specific instructions on accessing the UV lamp chamber. This typically involves opening a cover or unscrewing a component.
- پراڻو ايل هٽايوamp: احتياط سان پراڻي UV کي هٽايو.amp. Handle with care as it may be fragile.
- نئون ايل انسٽال ڪريوamp: Insert the new 9W UV lamp into its socket. Ensure it is seated correctly.
- ٻيهر گڏ ڪرڻ: Securely close the UV lamp chamber cover.
7. مسئلا حل ڪرڻ
If you encounter issues with your SunSun HW-404B filter, consult the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| فلٽر شروع نه ٿيڻ يا ڪمزور وهڪري | Not primed correctly; air trapped; clogged impeller; kinked hoses. | Re-prime the filter; gently rock the unit to release air; clean impeller; check hoses for obstructions. |
| Leaking from filter head | Improperly seated O-ring; damaged O-ring; head not securely clipped. | Inspect and re-seat O-ring; apply silicone lubricant; replace O-ring if damaged; ensure all clips are fully engaged. |
| زياده شور | Air trapped in filter; impeller issue; filter not level. | Release trapped air; clean/inspect impeller; ensure filter is on a stable, level surface. |
| UV sterilizer not working | UV ايلamp burned out; faulty switch; power issue. | تبديل ڪريو UV lamp; check power connection; contact support if switch is faulty. |
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نالو | HW-404B |
| ايڪريريم جي گنجائش | 150 گيلن تائين |
| وهڪري جي شرح | 525 GPH (2000 L/hr) |
| پمپ پاور | 55W |
| UV Sterilizer Power | 9W |
| جلدtage | 110 وولٽ |
| طول و عرض (L x W x H) | 11" L x 11" W x 19" H (Unit) / 20 x 16 x 14 inches (Product) |
| شيءِ جو وزن | 16.84 پائونڊ (7640 گرام) |
| فلٽريشن Stages | 5-ايسtage |
9. وارنٽي ۽ سپورٽ
The SunSun HW-404B External Canister Filter comes with a 180-day warranty, which excludes the UV lamp. For warranty claims, technical assistance, or to order replacement parts, please contact SunSun customer support through your retailer or the official SunSun webسائيٽ.





