BFT MITTO B RCB02 حقيقي ريموٽ ڪنٽرول استعمال ڪندڙ دستياب

1. پراڊڪٽ ختمview

The BFT MITTO B RCB02 is a genuine 2-channel remote control designed for operating BFT gate and garage door automation systems. This compact and ergonomic device provides reliable control over your automated entry points. It features two distinct buttons for controlling different functions or multiple gates/doors.

تصوير 1.1: سامهون view of the BFT MITTO B RCB02 remote control, showing its two control buttons and the BFT logo.

• ماڊل: ڊي 111904
• چينل: 2-چينل آپريشن
• رابطي: ريڊيو فريڪوئنسي
• Ergonomic ڊيزائن: آرامده هٿ کڻڻ لاءِ ٺهيل.

2. سيٽ اپ ۽ بيٽري جي انسٽاليشن

2.1. بيٽري جي گهرج

The BFT MITTO B RCB02 remote control requires one LR44 battery آپريشن لاءِ.

2.2. بيٽري لڳائڻ/بدلائڻ

1. Locate the battery compartment on the remote control. This is typically on the back or side, secured by a small screw or a clip.
2. Using a small screwdriver or a coin, carefully open the battery compartment cover.
3. Remove the old battery (if replacing).
4. Insert the new LR44 battery, ensuring the positive (+) and negative (-) terminals are correctly aligned according to the markings inside the compartment.
5. بيٽري جي ڪمري واري ڍڪ کي تبديل ڪريو ۽ ان کي محفوظ ڪريو.

2.3. ريموٽ ڪنٽرول کي پروگرام ڪرڻ

Programming the BFT MITTO B RCB02 remote control to your gate or garage door opener system typically involves a specific procedure that varies depending on the model of your BFT receiver unit. Please refer to the instruction manual provided with your BFT gate or garage door opener system for detailed programming steps. General programming methods often include:

• Self-learning mode: Activating a programming button on the receiver unit and then pressing a button on the new remote.
• Cloning from an existing remote: Using a working remote to transmit its code to the new remote.
• Using a programming device: For advanced installations, a dedicated programmer might be used.

Ensure the remote control is within range of the receiver during the programming process.

3. آپريٽنگ هدايتون

Once programmed, the BFT MITTO B RCB02 remote control is straightforward to operate.

1. بٽڻن جي سڃاڻپ ڪريو: The remote has two distinct buttons. Refer to your system's programming to know which button controls which function (e.g., open/close gate, pedestrian access, garage door).
2. Activate Function: Point the remote control towards your gate or garage door opener system (if line-of-sight is required for your specific receiver) and press the desired button firmly for approximately one second.
3. جواب ڏسو: The gate or garage door should begin its programmed action (open, close, stop).
4. حد: Operate the remote within the effective range of your receiver. Obstructions can reduce this range.

4. سار سنڀال

4.1. بيٽري مٽائڻ

Replace the LR44 battery when the remote's operating range decreases significantly or if the indicator light (if present) does not illuminate when a button is pressed. Refer to Section 2.2 for battery installation instructions.

4.2. صفائي

Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water, as this can damage the internal electronics.

4.3. اسٽوريج

Store the remote control in a dry place, away from direct sunlight and extreme temperatures. Avoid dropping the remote or subjecting it to strong impacts.

5. مسئلا حل ڪرڻ

• ريموٽ ڪم نه ڪري رهيو آهي
  • Check the battery. Replace it if it's old or depleted (refer to Section 2.2).
  • Ensure the remote is properly programmed to your receiver (refer to Section 2.3).
  • Verify that the receiver unit for your gate/garage door is powered on and functioning correctly.
• گھٽ ٿيل آپريٽنگ رينج:
  • بيٽري کي تبديل ڪريو.
  • Check for obstructions between the remote and the receiver.
  • Ensure there are no sources of radio interference nearby.
• Gate/door opens/closes unexpectedly:
  • This is unlikely to be caused by the remote itself unless a button is being accidentally pressed. Check for external interference or issues with the main gate/door opener system.

If troubleshooting steps do not resolve the issue, contact a qualified BFT technician or your product supplier for assistance.

6. وضاحتون

7. وارنٽي ۽ سپورٽ

For specific warranty information regarding your BFT MITTO B RCB02 remote control, please refer to the documentation provided at the time of purchase or contact your authorized BFT dealer or the retailer from whom you purchased the product. Warranty terms and conditions can vary by region and seller.

For technical support or further assistance, please contact your local BFT service center or the official BFT webرابطي جي تفصيل لاءِ سائيٽ.

ٺاهيندڙ: Sice