1. پراڊڪٽ ختمview
The Schlage F51A Georgian 505 is a single cylinder entry door lock knobset designed for residential use. This lock provides security with a key entry from the outside and a turn-button for locking/unlocking from the inside. The interior knob always remains free for immediate exit (panic-proof function). The unit is non-handed and field reversible, allowing for flexible installation on left or right-handed doors.
2. پيڪيج مواد
انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي حصا موجود آهن. جيڪڏهن ڪو به پرزو غائب يا خراب آهي، ته انسٽاليشن سان اڳتي نه وڌو ۽ ڪسٽمر سپورٽ سان رابطو ڪريو.
- Exterior Knob Assembly (with key cylinder)
- Interior Knob Assembly (with turn-button)
- Latch Bolt Assembly
- Strike Plate (Part 10-063, supplied with Square Corner and Round Corner Full Lip Strike Plates, Dimensions: 2-1/4" x 1-5/8")
- Faceplates (Part 16-211, supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates)
- چڙهڻ اسڪرو
- Keys (typically 2)
- انسٽاليشن ٽيمپليٽ (جيڪڏهن شامل هجي)
3. حفاظت جي ڄاڻ
Read all instructions carefully before installation and use. Keep this manual for future reference.
- انسٽاليشن دوران هميشه مناسب حفاظتي سامان پائڻ، جهڙوڪ حفاظتي چشما.
- Use the correct tools for the job to prevent damage to the lock or injury.
- Ensure the door is properly prepared and aligned before installing the lock.
- Do not force components during installation. If parts do not fit, re-check the instructions.
- ننڍن حصن کي ٻارن کان پري رکو ته جيئن ٿڪڻ جي خطرن کي روڪڻ لاء.
- اهم: Do not use prints made from this website or any digital source to mark distances for drilling. Due to individual printers and display settings, dimensions on installation instructions may not print or display at an accurate scale. Always use the physical template provided with the product or measure carefully.
4. انسٽاليشن گائيڊ
This section provides general steps for installing the Schlage F51A Georgian 505 entry door lock. For detailed, step-by-step instructions, refer to the specific installation template and guide included in your product packaging.
4.1 Prepare the Door
- Ensure the door is properly bored for a standard door lock (typically 2-1/8 inch cross bore and 1 inch edge bore).
- Measure the backset (distance from the door edge to the center of the cross bore). Adjust the latch bolt if necessary to fit 2-3/8 inch or 2-3/4 inch backsets.
- Chisel out a mortise for the latch faceplate and strike plate on the door edge and frame, respectively, if not already present.
4.2 Install the Latch Bolt
- Insert the latch bolt into the edge bore of the door, ensuring the bevel of the latch faces the door frame.
- Secure the latch bolt with the provided screws. Choose the appropriate faceplate (1/4" Round Corner, Square Corner, or Drive-In) to match your door preparation.
4.3 Install the Knobs
- Insert the exterior knob assembly through the cross bore, ensuring the spindle engages with the latch mechanism.
- Place the interior knob assembly onto the spindle, aligning the mounting posts with the holes in the exterior assembly.
- Secure the interior and exterior assemblies together using the provided mounting screws. Tighten screws evenly to prevent binding.
- نوٽ: The unit is non-handed and field reversible, meaning it can be installed on either left or right-handed doors without modification.
4.4 Install the Strike Plate
- Close the door and mark the position where the latch bolt strikes the door frame.
- Install the strike plate (Part 10-063) on the door frame, aligning it with the latch bolt. Use the appropriate strike plate (Square Corner or Round Corner Full Lip) for your frame.
- Secure the strike plate with the provided screws.
4.5 Test Operation
After installation, test the lock's function with the door open and closed to ensure smooth operation.
5. آپريشن
5.1 Locking and Unlocking from the Exterior
- To unlock: Insert the key into the keyway and turn it.
- To lock: Turn the key to the locked position and remove it. The exterior knob will then be rigid.
5.2 Locking and Unlocking from the Interior
- To unlock: Rotate the turn-button on the interior knob.
- To lock: Rotate the turn-button on the interior knob to the locked position.
- Panic-Proof Feature: The interior knob always remains free, allowing for immediate exit even when the lock is engaged. Turning the interior knob will retract the latch bolt.
6. سار سنڀال
Proper maintenance ensures the longevity and smooth operation of your Schlage lock.
- صفائي: تالي جي ٻاهرين حصي کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. گھڙڻ وارا صاف ڪندڙ، محلول، يا سخت ڪيميڪلز کان پاسو ڪريو، ڇاڪاڻ ته اهي ختم کي نقصان پهچائي سگهن ٿا.
- لوڻ: Periodically apply a small amount of graphite-based lubricant (do not use oil-based lubricants) into the keyway and the latch mechanism to ensure smooth operation.
- چڪاس: Regularly check all mounting screws for tightness. If the lock feels loose, gently tighten the screws.
- مڪمل سنڀال: The Lifetime Bright Brass finish is designed for durability. However, prolonged exposure to harsh weather or chemicals can affect its appearance.
7. مسئلا حل ڪرڻ
If you encounter issues with your Schlage F51A Georgian 505 lock, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Key does not turn or is stiff. | چاٻي ۾ مٽي، ڦاٽل چاٻي، يا غلط ترتيب ڏنل سلنڈر. | Clean keyway with compressed air. Apply graphite lubricant. Try a spare key. If issue persists, contact support. |
| Knob is loose or wobbly. | چڙهڻ اسڪرو خالي آهن. | Tighten the mounting screws on the interior knob assembly. |
| Latch bolt does not retract fully or binds. | Misalignment of lock components or strike plate. | Check alignment of latch bolt and strike plate. Ensure mounting screws are not overtightened, causing binding. Lubricate latch mechanism. |
| Door does not latch or close properly. | Strike plate misalignment or door sag. | Adjust the strike plate position on the door frame. Check door hinges for sag. |
8. وضاحتون
- ماڊل نمبر: F51A GEO 505
- برانڊ: شلج
- قسم: Single Cylinder Entry Door Lock Knobset
- ختم ڪر: Lifetime Bright Brass
- مواد: پيتل
- انداز: Traditional (Georgian)
- خاص خاصيتون: Key Lock, Panic-Proof Interior Knob
- پيداوار جي ماپ: تقريبن 4 x 6 x 5 انچ
- شيء جو وزن: تقريبن 1.2 پائونڊ
- بيٽرين جي ضرورت آهي: نه
- اصل جو ملڪ: ميڪسيڪو
9. وارنٽي ۽ سپورٽ
Schlage products are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty information included with your product packaging or visit the official Schlage webسائيٽ.
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Schlage Customer Support. Contact information can typically be found on the Schlage webسائيٽ يا توهان جي پراڊڪٽ دستاويزن ۾.
آن لائين وسيلا: www.schlage.com
