تعارف
This manual provides essential information for the proper setup, operation, and maintenance of your TeeJet AI11004-VS 110 Degree Air Induction Flat Spray Tip. Understanding these instructions will ensure optimal performance and longevity of the product.
The TeeJet AI11004-VS is designed for broadcast spraying applications, featuring a stainless steel insert and a polymer insert holder with a pre-orifice. Its air induction technology produces large, air-filled droplets, which significantly reduces spray drift. This tip provides a tapered edge flat spray pattern for uniform coverage.
پيداوار ختمview
The image displays the TeeJet AI11004-VS 110 Degree Air Induction Flat Spray Tip. It is red in color and features a robust design with visible internal components at the top, indicating its precision engineering for spray applications. The model number "AI11004-VS" is clearly printed on the side of the tip.
اهم خاصيتون:
- Air Induction Technology: Produces large, air-filled droplets for reduced drift.
- Tapered Edge Flat Spray Pattern: Ensures uniform coverage.
- پائيدار تعمير: Features a stainless steel insert and polymer holder.
- ورسٽائل ايپليڪيشن: Suitable for various broadcast spraying needs.
- Recommended Pressure Range: 30-115 PSI (2-8 bar).
سيٽ اپ ۽ تنصيب
Proper installation is crucial for the optimal performance of your spray tip.
- اجزاء جي چڪاس ڪريو: Before installation, ensure all components of the spray tip are free from damage or debris.
- Prepare Sprayer: Ensure your sprayer system is clean and free of any residual chemicals.
- صلاح شامل ڪريو: Securely attach the TeeJet AI11004-VS spray tip to your sprayer's nozzle body. For automatic spray alignment, it is recommended to pair it with the 114443A-1-CELR TeeJet Black Cap and Gasket.
- ڪنيڪشن چيڪ ڪريو: Verify all connections are tight to prevent leaks during operation.
- شروعاتي پاڻي جي جاچ: Before applying any chemicals, perform a test spray with clean water to check for proper spray pattern and leaks.
آپريٽنگ هدايتون
Follow these guidelines for effective and safe operation of the spray tip.
پريشر سيٽنگون:
The recommended operating pressure range for the TeeJet AI11004-VS is 30-115 PSI (2-8 بار). Operating within this range ensures the best spray pattern and drift reduction.
Application Rate Chart:
This image displays a detailed TeeJet Flat Application Rate Chart. The chart provides data for various TeeJet spray tips, including the AI11004-VS, showing flow rates in GPM (Gallons Per Minute) and nozzle output in OZ/MIN (Ounces Per Minute) at different PSI (Pounds per Square Inch) levels. It also includes application rates in Gallons Per Acre (GPA) and Gallons Per 1000 Square Feet (GPM/1000 SQ FT) based on different MPH (Miles Per Hour) speeds. Users should consult this chart to determine the appropriate pressure and speed for their desired application rate.
Refer to the TeeJet Flat Application Rate Chart to determine the correct pressure and speed for your specific application volume. This chart provides detailed information on flow rates and coverage based on various operating parameters.
Drift Reduction:
The air induction technology of this tip is designed to minimize drift. To further reduce drift, avoid spraying in windy conditions and ensure the spray boom height is appropriate for the application.
سار سنڀال
Regular maintenance will extend the life of your spray tip and ensure consistent performance.
- صفائي: After each use, thoroughly flush the spray tip with clean water to remove any chemical residues.
- Clog Removal: If the tip becomes clogged, remove it from the sprayer and clean it using a soft brush or compressed air. Do not use metal objects or sharp tools, as this can damage the orifice.
- اسٽوريج: Store the spray tip in a clean, dry place away from direct sunlight and extreme temperatures.
- چڪاس: Periodically inspect the tip for wear, damage, or blockages. Replace the tip if the spray pattern becomes uneven or flow rate is inconsistent.
مشڪلاتون
عام مسئلا ۽ انهن جو حل:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| اڻ برابر اسپري جو نمونو | Partially clogged orifice; Worn tip; Incorrect pressure. | Clean the tip; Replace the tip; Adjust pressure to recommended range. |
| گھٽيل وهڪري جي شرح | Clogged tip or filter; Low pump pressure. | Clean the tip and system filters; Check pump and pressure regulator. |
| Excessive Drift | Too high pressure; Spraying in windy conditions; Incorrect boom height. | Reduce pressure; Avoid spraying in high winds; Adjust boom height. |
| ڪنيڪشن تي ليڪ ٿيڻ | Loose connection; Damaged gasket or O-ring. | Tighten connection; Replace gasket or O-ring. |
وضاحتون
| وصف | تفصيل |
|---|---|
| ماڊل نمبر | AI11004-VS |
| برانڊ | ٽي جيٽ |
| مواد | بي داغ لوه |
| اسپري اينگل | 110 درجا |
| اسپري پيٽرن | Tapered Edge Flat Spray |
| سفارش ٿيل آپريٽنگ پريشر | 30-115 PSI (2-8 بار) |
| طول و عرض (L x W x H) | 0.63 x 0.63 x 1.75 انچ |
| وزن | 0.16 اونس |
| انليٽ ڪنيڪشن سائيز | 0.63 انچ |
| Inlet ڪنيڪشن جو قسم | بارب |
| آئوٽليٽ ڪنيڪشن سائيز | 0.63 انچ |
| آئوٽليٽ ڪنيڪشن جو قسم | بارب |
رابطو ۽ حمايت
For further assistance or inquiries regarding your TeeJet AI11004-VS spray tip, please contact TeeJet customer support or visit their official webسائيٽ.
Note: Warranty information is typically provided with the product packaging or available on the manufacturer's official webسائيٽ.
