TeeJet XR11004VS Extended Range Spray Tip User Manual

تعارف

The TeeJet XR11004VS Extended Range Spray Tip is designed for precision spraying in various applications, offering excellent spray distribution and reduced drift across a wide pressure range. This manual provides essential information for the proper setup, operation, and maintenance of your spray tip to ensure optimal performance and longevity.

پيداوار جون خاصيتون

• Ideal for rigs equipped with sprayer controllers.
• Reduces drift at lower pressures, better coverage at higher pressures.
• Excellent spray distribution over a wide range of pressures.
• Present in 80 deg and 110 deg spray angles with VisiFlo color-coding.

پيداوار ختمview

سيٽ اپ ڪريو

1. حفاظت پهريون: Always wear appropriate personal protective equipment (PPE) including gloves and eye protection when handling spray equipment and chemicals.
2. اجزاء جي چڪاس ڪريو: Before installation, ensure the spray tip, cap, and gasket are clean and free from damage.
3. گيسڪٽ انسٽال ڪريو: Place the appropriate gasket (e.g., EPDM, Viton) into the Quick TeeJet cap.
4. داخل ڪرڻ جي صلاح: Carefully insert the XR11004VS spray tip into the cap, ensuring it is seated correctly.
5. Attach to Nozzle Body: Thread the Quick TeeJet cap onto the nozzle body of your sprayer. Hand-tighten until snug. Avoid over-tightening, which can damage the tip or cap.
6. ترتيب جي تصديق ڪريو: For automatic spray alignment, ensure you are using compatible Quick TeeJet caps and gaskets. Otherwise, manually align the spray pattern as desired.
7. لڪي چيڪ: After installation, fill the sprayer with water and pressurize to check for any leaks around the tip and cap.

آپريٽنگ هدايتون

1. دٻاء جي حد: The XR11004VS tip is designed to operate effectively across a pressure spectrum of 15 to 60 PSI (1–4 bar). Refer to the flow rate chart for specific application rates at different pressures.
2. Spray Height: Maintain the recommended spray height above the target to achieve uniform coverage and minimize drift. Consult application charts for optimal height based on nozzle spacing and spray angle.
3. سفر جي رفتار: Adjust your travel speed to achieve the desired application volume. Slower speeds increase application volume, while faster speeds decrease it.
4. هوا جون حالتون: Avoid spraying in windy conditions to prevent drift and ensure accurate application. The extended range design helps reduce drift, but extreme wind should still be avoided.
5. ڪيميائي مطابقت: Ensure the spray tip material (stainless steel) is compatible with the chemicals being sprayed.

سار سنڀال

1. باقاعده صفائي: After each use, thoroughly rinse the spray tip with clean water to remove any chemical residues.
2. Unclogging: If the tip becomes clogged, remove it from the sprayer and clean it using a soft brush or a specialized nozzle cleaning tool. Do not use metal objects or wire, as this can damage the orifice and alter the spray pattern.
3. لباس جي چڪاس ڪريو: Periodically inspect the tip for signs of wear, such as a distorted spray pattern or increased flow rate at a given pressure. Worn tips should be replaced to maintain application accuracy.
4. گيسڪيٽ جي متبادل: Replace gaskets regularly, especially if they show signs of wear, cracking, or if leaks occur.
5. اسٽوريج: Store spray tips in a clean, dry place away from direct sunlight and extreme temperatures.

مشڪلاتون

وضاحتون

• ماڊل: XR11004VS
• مواد: بي داغ لوه
• اسپري زاويه: 110°
• Optimal Pressure Range: 15-60 PSI (1-4 بار)
• پيڪيج جي ماپ: 3.15 x 2.05 x 1.1 انچ
• شيء جو وزن: 1.6 اونس
• ٺاهيندڙ: اسپرينگ سسٽم
• Color-Coding: VisiFlo (Red)

وارنٽي ۽ سپورٽ

For information regarding product warranty, technical support, or replacement parts, please refer to the official TeeJet webسائيٽ تي وڃو يا پنهنجي مجاز ڊيلر سان رابطو ڪريو. وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکو.