هيگر WITTY اليڪٽرڪ گاڏين جي چارجنگ اسٽيشن (ماڊل XEV103) استعمال ڪندڙ دستياب

1. تعارف

1.1. کانview

The Hager WITTY charging station is designed for charging electric vehicles in accordance with Mode 3 (IEC 61851-1) and Mode 2 standards. It supports both Type 3 and standard socket connections, offering flexible charging solutions for various electric vehicles. This device operates on a 3-phase + Neutral, 32A electrical supply, delivering power from 4 kW to 22 kW.

1.2. حفاظتي هدايتون

• مقامي ۽ قومي اليڪٽريڪل ڪوڊس جي مطابق هڪ قابل اليڪٽريشن طرفان انسٽاليشن ڪرڻ گهرجي.
• Do not attempt to open or repair the charging station yourself. Contact qualified service personnel.
• Ensure the charging station is properly grounded.
• Do not use the charging station if it is damaged or shows signs of malfunction.
• Keep children and unauthorized persons away from the charging station during operation.
• Avoid exposing the charging station to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.

2. پيداوار جي وضاحت

2.1. خاصيتون

• Compatible with Mode 3 (Type 3) and Mode 2 charging.
• Free access operation.
• Power output: 4 kW to 22 kW.
• Input: 3-phase + Neutral, 32A.
• Integrated status indicator light.

2.2. جزا

The Hager WITTY charging station typically includes:

• چارجنگ اسٽيشن يونٽ
• هارڊويئر تي چڙهڻ (اسڪريو، لنگر)
• يوزر مينوئل (هي دستاويز)

شڪل 1: سامهون view of the Hager WITTY charging station with a green operational light, mounted on a textured wall.

شڪل 2: پاسي view of the Hager WITTY charging station, illustrating the cable connection point and the unit's profile.

شڪل 3: تفصيلي اڳيون view of the Hager WITTY charging station, emphasizing the integrated green status light.

3. سيٽ اپ

3.1. تنصيب جي جڳھ

Choose a suitable location that is protected from direct impact, excessive moisture, and extreme temperatures. Ensure adequate ventilation and accessibility for maintenance.

3.2. چڙهڻ

1. Mark the drilling points on the wall using the provided template (if applicable) or by measuring the mounting holes on the unit.
2. سوراخ ڪريو ۽ مناسب ڀت اينڪر داخل ڪريو.
3. Secure the charging station to the wall using the provided screws.

3.3. بجليءَ وارا ڪنيڪشن

خبردار: اليڪٽريڪل تنصيب لازمي طور تي هڪ قابل اليڪٽريشن طرفان ڪيو وڃي.

1. Ensure the main power supply is disconnected before beginning any electrical work.
2. Connect the 3-phase + Neutral (3Ph+N) 32A power supply to the designated terminals inside the charging station.
3. Ensure proper grounding is established.
4. Verify all connections are secure and correctly wired according to the wiring diagram provided with the unit (refer to the separate installation guide for detailed diagrams).
5. Close the charging station cover securely.

4. آپريٽنگ

4.1. Starting a Charge

1. Ensure the charging station is powered on and the status indicator light is green (ready).
2. Connect the charging cable to your electric vehicle's charging port.
3. Connect the other end of the charging cable to the charging station's outlet (Type 3 or Mode 2 socket).
4. The charging station will automatically initiate the charging process. The status indicator light may change to blue or flashing green, depending on the charging status.

4.2. Stopping a Charge

1. Disconnect the charging cable from your electric vehicle first.
2. Disconnect the charging cable from the charging station.
3. The charging station will return to a ready state (green indicator light).

4.3. حيثيت جا اشارا

• سائي روشني: Ready for charging.
• Blue Light (or flashing green): چارج جاري آهي.
• Red Light (or flashing red): Error or fault detected. Refer to the Troubleshooting section.
• روشني ناهي: Power off or system fault.

5. سار سنڀال

5.1. صفائي

Clean the exterior of the charging station with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the unit is powered off before cleaning.

5.2. معائنو

Periodically inspect the charging station for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage. If any damage is found, discontinue use and contact a qualified technician.

6. مسئلا حل ڪرڻ

7. وضاحتون

8. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official Hager website or contact your local Hager distributor. Keep your purchase receipt for warranty claims.

Spare parts availability: Information not available.