1. تعارف
The SkylinkHome LK-318-3 Wireless Three Button Keychain Remote Control is designed to wirelessly operate compatible SkylinkHome receiver modules. This compact and lightweight transmitter allows for convenient control of various home automation devices, such as lighting and small appliances, from a distance. It incorporates rolling code technology for enhanced security and offers optional password protection.
2. پيڪيج مواد
- SkylinkHome LK-318-3 Keychain Remote Control
- Lithium Battery (CR-2032, pre-installed)
- استعمال ڪندڙ هدايتون
3. خاصيتون
- Three-Button Control: Operates up to three distinct SkylinkHome receiver modules.
- وائرليس آپريشن: Provides remote control for lighting, small appliances, and other home electronics.
- وڌايل حد: Operates up to 500 feet in an open area, including through walls and floors.
- ڪمپيڪٽ ڊيزائن: Small and lightweight, suitable for carrying on a keychain, in a pocket, or purse.
- اڳ ۾ نصب ٿيل بيٽري: Includes a long-life CR-2032 lithium battery.
- Optional Password Protection: Enhances security by requiring a 2 to 8-digit password (using buttons 1, 2, and 3) before operation.
- Rolling Code Technology: Generates a unique code with each activation, preventing unauthorized code duplication.
4. سيٽ اپ
4.1 بيٽري لڳائڻ
The SkylinkHome LK-318-3 remote control comes with a CR-2032 lithium battery pre-installed. If the battery needs replacement, refer to the Maintenance section.
4.2 ريموٽ کي پروگرام ڪرڻ
To program the LK-318-3 remote control to your SkylinkHome receiver modules, follow the specific programming instructions provided with your SkylinkHome receiver module. The remote is designed for easy synchronization with compatible receivers. Typically, this involves placing the receiver into a learning mode and then pressing a button on the remote.
شڪل 1: سامهون view of the SkylinkHome LK-318-3 Remote Control, showing the three control buttons and the LED indicator.
5. آپريٽنگ هدايتون
5.1 بنيادي آپريشن
Once programmed to your SkylinkHome receiver modules, press the corresponding button (1, 2, or 3) on the keychain remote to activate or deactivate the linked module. The remote can control up to three separate modules.
5.2 Optional Password Protection
For enhanced security, you can enable password protection. When enabled, the remote will only operate after the correct password has been entered. The password can be a sequence of 2 to 8 digits, created using a combination of buttons 1, 2, and 3. For example, a password could be '1-2-1-2'. Refer to your SkylinkHome receiver's manual for specific instructions on enabling and setting up password protection.
5.3 Rolling Code Technology
The LK-318-3 remote utilizes rolling code technology. This means that each time you press a button, the remote generates a new, unique code. This code is recognized by your rolling code compatible receiver, which then performs the desired function. This technology significantly reduces the risk of unauthorized access by preventing code duplication through electronic scanners, as the next code will always be different.
شڪل 2: The SkylinkHome LK-318-3 Remote Control shown attached to a keychain with a car key, illustrating its compact and portable design.
6. سار سنڀال
6.1 بيٽري مٽائڻ
The remote control is powered by a CR-2032 lithium battery. When the remote's operational range decreases or the LED indicator does not light up consistently, it may be time to replace the battery. To replace the battery:
- ريموٽ ڪنٽرول کي احتياط سان کوليو casing.
- پراڻي CR-2032 بيٽري هٽايو.
- Insert a new CR-2032 lithium battery, ensuring correct polarity (+ side up).
- ريموٽ ڪنٽرول بند ڪريو casinجي محفوظ طور تي.
مقامي ضابطن جي مطابق پراڻين بيٽرين کي ضايع ڪريو.
7. مسئلا حل ڪرڻ
- ريموٽ جواب نه ڏئي رهيو آهي:
- Check the battery. Replace if necessary (refer to Section 6.1).
- Ensure the remote is within the operational range of the receiver (up to 500 feet in open area).
- Verify that the remote is correctly programmed to the receiver (refer to Section 4.2).
- If password protection is enabled, ensure the correct password is being entered.
- محدود حد:
- بيٽري کي تبديل ڪريو.
- Ensure there are no significant obstructions (e.g., thick concrete walls, large metal objects) between the remote and the receiver.
- Avoid sources of strong radio interference.
- مطابقت جا مسئلا:
- The LK-318-3 remote is designed for use with SkylinkHome receiver modules. It may not be compatible with other brands or older systems from different manufacturers.
8. وضاحتون
| ماڊل نمبر | LK-318-3 |
| برانڊ | SKYLINK |
| طاقت جو ذريعو | بيٽري سان هلندڙ |
| بيٽري جو قسم | CR-2032 Lithium (1 included) |
| بيٽري جي زندگي | تقريبن 5000 ڪلاڪ |
| آپريشنل رينج | 500 فوٽن تائين (کليل علائقو) |
| پيداوار جي ماپ | 4.32 x 1.78 x 12.7 سينٽي (1.7 x 0.7 x 5 انچ) |
| شيءِ جو وزن | 90.72 گرام (3.2 اونس) |
شڪل 3: The SkylinkHome LK-318-3 Remote Control positioned beside a car key, highlighting its compact size for easy integration with existing keychains.
9. وارنٽي ۽ سپورٽ
For warranty information or technical support regarding your SkylinkHome LK-318-3 Wireless Three Button Keychain Remote Control, please refer to the documentation included with your purchase or visit the official Skylink website. Contact information for customer service is typically available on the product packaging or the manufacturer's support page.
