1. تعارف
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dodge Genuine 82212299AC Tubular Side Steps. Please read this manual thoroughly before beginning installation to ensure proper fitment and safe use. Retain this manual for future reference.
2. پراڊڪٽ ختمview
The Dodge Genuine 82212299AC Tubular Side Steps are designed to provide a convenient and secure stepping surface for vehicle entry and exit. These steps are constructed from lightweight anodized aluminum or powder-coated steel, featuring a mandrel-bent design for consistent diameter and molded end caps for an integrated appearance.
شڪل 1: مٿانview of the Dodge Genuine Tubular Side Steps. These steps feature a black finish and integrated stepping pads.
شڪل 2: Detail of the stepping pad on the Dodge Tubular Side Step, highlighting the textured surface and the embossed 'DODGE' branding.
3. مطابقت
These tubular side steps are specifically designed for the following vehicle models:
- 2011-2013 ڊوج ڊورنگو
Ensure your vehicle matches the specified model years before proceeding with installation.
4. حفاظت جي ڄاڻ
Always prioritize safety during installation and use. Failure to follow these safety guidelines may result in injury or damage to your vehicle.
- مناسب ذاتي حفاظتي سامان (پي پي اي) پائڻ، جهڙوڪ حفاظتي چشما ۽ دستانا.
- پڪ ڪريو ته گاڏي هڪ هموار سطح تي پارڪ ڪئي وئي آهي ۽ پارڪنگ بريڪ لڳل آهي.
- Do not exceed the maximum weight capacity of the side steps (consult vehicle manufacturer specifications if available).
- Periodically inspect the side steps and mounting hardware for looseness or damage.
- If you are unsure about any step of the installation process, seek professional assistance.
5. سيٽ اپ ۽ تنصيب
Installation typically involves mounting the side steps to existing frame points on your vehicle. Specific instructions may vary slightly based on vehicle configuration. Refer to your vehicle's service manual for detailed frame diagrams if necessary.
5.1. گهربل اوزار (شامل نه آهن)
- ساکٽ رنچ سيٽ
- ٽورڪ رينچ
- ماپڻ وارو ٽيپ
- حفاظتي چشما
- دستانو
5.2. تنصيب جا مرحلا
- گاڏي تيار ڪريو: Park the vehicle on a flat, stable surface. Engage the parking brake and turn off the engine.
- ماؤنٽنگ پوائنٽس جي سڃاڻپ ڪريو: Locate the factory mounting points along the rocker panel or frame of your Dodge Durango. These are typically pre-drilled holes or existing bolt locations.
- بریکٹس ڳنڍيو: Secure the mounting brackets (if separate from the steps) to the vehicle's frame using the provided hardware. Hand-tighten bolts initially.
- Position Side Step: Carefully lift and position the tubular side step onto the attached brackets. Ensure proper alignment.
- Secure Side Step: Attach the side step to the brackets using the remaining hardware. Hand-tighten all bolts.
- Adjust and Torque: Adjust the side step for optimal positioning and levelness. Once satisfied, progressively tighten all mounting bolts to the vehicle manufacturer's recommended torque specifications. وڌيڪ تنگ نه ڪريو.
- ٻئي پاسي لاءِ ورجايو: Follow the same procedure for installing the side step on the opposite side of the vehicle.
- آخري معائنو: Double-check all bolts for tightness and ensure the side steps are securely mounted and stable.
6. آپريٽنگ (استعمال)
The tubular side steps are designed for easy and safe vehicle entry and exit. Step onto the textured pads for secure footing. Ensure your footwear is clean and dry to prevent slipping.
- Always step onto the designated textured areas.
- Avoid placing excessive weight on the steps, especially when entering or exiting.
- Do not use the side steps as a jacking point or for vehicle recovery.
7. سار سنڀال
Regular maintenance will help preserve the appearance and functionality of your side steps.
- صفائي: Wash the side steps regularly with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- چڪاس: Periodically inspect all mounting hardware for tightness. Re-torque bolts if necessary. Check for any signs of corrosion, cracks, or damage to the steps or mounting brackets.
- سياري جي سنڀال: In areas with road salt or de-icing chemicals, rinse the steps frequently to prevent corrosion.
8. مسئلا حل ڪرڻ
هي حصو عام مسئلن کي حل ڪري ٿو جيڪي توهان کي منهن ڏئي سگهن ٿا.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Side step feels loose | چڙهڻ وارا بولٽ ڍلا آهن. | Inspect and re-torque all mounting bolts to specifications. |
| Unusual noise from step | Loose hardware or contact with vehicle body. | Check all mounting points. Ensure no part of the step is rubbing against the vehicle. |
| Difficulty aligning step | Incorrect bracket placement or vehicle not level. | Verify bracket orientation and mounting points. Ensure vehicle is on a level surface. |
9. وضاحتون
- ماڊل: 82212299AC
- برانڊ: Dodge Genuine
- مواد: مصر جو اسٽيل، ايلومينيم
- خارجي ختم: Black (Powder-coated steel or anodized aluminum)
- شيء جو وزن: تقريبن 45.8 پائونڊ (ڪل پيڪيج)
- پيڪيج جي ماپ: 76 x 11.5 x 11.5 انچ
- مطابقت: 2011-2013 ڊوج ڊورنگو
10. وارنٽي ۽ سپورٽ
For warranty information regarding your Dodge Genuine 82212299AC Tubular Side Steps, please refer to the documentation provided at the time of purchase or contact your authorized Dodge dealer. Support for genuine Dodge accessories is typically handled through official Dodge service channels.
For further assistance, please visit the official Dodge webسائيٽ يا انهن جي ڪسٽمر سروس کاتي سان رابطو ڪريو.
