تعارف
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Astral Pool Victoria Plus Pool Pump. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Key features of the Astral Pool Victoria Plus Pool Pump include:
- Simple and sturdy design with an easy-to-use pre-filter nut.
- Silent operation, enhanced by integrated rubber feet.
- Motor protection class IP-55, ensuring durability and safety.
- Equipped with a large capacity pre-filter basket for efficient debris collection.
Figure 1: Astral Pool Victoria Plus Pool Pump. This image displays the complete pool pump unit, highlighting its compact design, the motor housing on the left, and the pre-filter basket with its transparent lid on the right. The inlet and outlet connections are also visible.
سيٽ اپ ۽ تنصيب
Proper installation is crucial for the pump's performance and safety. It is recommended that installation be performed by a qualified professional.
1. سائيٽ جي چونڊ
- Install the pump in a dry, well-ventilated area, protected from direct sunlight and rain.
- Ensure the location allows for easy access for maintenance and servicing.
- The pump should be installed as close to the pool as possible to minimize friction loss in the plumbing.
- Ensure the base is level and stable to prevent vibration and noise. The integrated rubber feet help with silent operation.
2. پلمبنگ ڪنيڪشن
- Connect the suction line from the pool to the inlet port of the pump (typically the side port).
- Connect the discharge line to the outlet port (typically the top port) leading to the filter system.
- Use appropriate PVC fittings and solvent cement for secure, leak-free connections.
- Ensure all connections are tight but do not overtighten plastic fittings.
3. بجليءَ وارا ڪنيڪشن
- تصديق ڪريو ته پاور سپلائي voltagاي پمپ جي گهرجن (230 وولٽ) سان ملندو آهي.
- All electrical wiring must comply with local electrical codes and regulations.
- پمپ کي صحيح طور تي گرائونڊ ٿيڻ گهرجي.
- Install a suitable circuit breaker or fuse for motor protection. The motor protection class is IP-55.
آپريٽنگ هدايتون
Follow these steps for safe and effective operation of your pool pump.
1. پمپ کي پرائم ڪرڻ
- پڪ ڪريو ته تلاءَ جي پاڻي جي سطح مناسب آهي.
- Open all suction and return valves in the plumbing system.
- Remove the pre-filter basket lid by unscrewing the pre-filter nut.
- Fill the pre-filter basket with water until it overflows.
- Replace the pre-filter basket lid and tighten the nut securely to prevent air leaks.
- Turn on the pump. The pump should prime within a few minutes. If not, turn it off, re-prime, and check for air leaks.
2. عام آپريشن
- Once primed, the pump will circulate water through the filter system.
- Monitor the pressure gauge on your filter (if applicable) to ensure proper flow.
- The pump is designed for continuous operation during filtration cycles.
3. پمپ کي بند ڪرڻ
- Turn off the power to the pump at the circuit breaker or switch.
- Close any necessary valves if performing maintenance or winterizing.
سار سنڀال
باقاعده سار سنڀال بهترين ڪارڪردگي کي يقيني بڻائي ٿي ۽ توهان جي پمپ جي زندگي وڌائي ٿي.
1. Cleaning the Pre-Filter Basket
- پاڻي جي وهڪري کي روڪڻ لاءِ پمپ بند ڪريو ۽ ضروري والوز بند ڪريو.
- Unscrew the pre-filter nut and remove the lid.
- Lift out the pre-filter basket and empty any debris.
- ٽوڪري کي پاڻيءَ سان چڱيءَ طرح ڌوئو.
- ڍڪ تي او-رنگ کي ڦاٽن يا خرابين لاءِ چيڪ ڪريو. جيڪڏهن ضروري هجي ته ان کي تبديل ڪريو.
- Place the basket back into the housing, ensuring it is seated correctly.
- Replace the lid and tighten the pre-filter nut securely.
- Re-prime the pump as described in the "Operating Instructions" section.
2. Motor Care
- Keep the motor free from dirt, dust, and debris to ensure proper ventilation.
- Do not spray water directly onto the motor.
- آپريشن دوران ڪنهن به غير معمولي شور يا وائبريشن جي چڪاس ڪريو.
3. سياري ڪرڻ
- In areas subject to freezing temperatures, the pump must be drained and protected.
- Turn off power to the pump.
- Drain all water from the pump by removing the drain plugs (if applicable) or disconnecting plumbing.
- Store the pump in a dry, frost-free location, or cover it adequately if it remains installed.
مشڪلاتون
هي حصو انهن عام مسئلن جو حل فراهم ڪري ٿو جيڪي توهان کي درپيش اچي سگهن ٿا.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| پمپ شروع نٿو ٿئي | No power; tripped breaker; faulty wiring; motor issue. | Check power supply, reset breaker, inspect wiring, consult a qualified electrician. |
| پمپ هلندو آهي پر پرائم نه ڪندو آهي يا گهٽ وهڪري وارو هوندو آهي | Air leak in suction line; clogged pre-filter basket; low water level; closed valves. | Check all connections for leaks, clean pre-filter basket, ensure adequate pool water level, open all valves. |
| گهڻو شور يا وائبريشن | Air in system; cavitation; worn bearings; loose mounting. | Re-prime pump, check for obstructions in plumbing, ensure pump is securely mounted. If noise persists, contact service. |
| پمپ مان پاڻي نڪرڻ | Loose connections; worn O-rings or seals; cracked housing. | Tighten connections, inspect and replace O-rings/seals, contact service for housing damage. |
وضاحتون
Detailed technical specifications for the Astral Pool Victoria Plus Pool Pump.
| وصف | قدر |
|---|---|
| برانڊ | ايسٽرل پول |
| ماڊل نمبر | part_B00J0CT5FK |
| ٺاهيندڙ | ASTRAL |
| پيداوار جي ماپ | 64 x 27 x 41 سينٽي |
| شيءِ جو وزن | 14.3 ڪلوگرام |
| ماپ | 1.5 سي وي |
| رنگ | blackone |
| انداز | classical |
| مواد | پوليوپروپيلين (پي پي) |
| پاور ماخذ جو قسم | تار ٿيل برقي |
| جلدtage | 230 وولٽ |
| شيون پيڪيج مقدار | 1 |
| وهڪري جي شرح | 24 Cubic Metres Per Hour |
| Motor Protection Class | IP-55 |
وارنٽي ۽ سپورٽ
For warranty information and technical support, please refer to the official Astralpool webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. ڪنهن به وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.
For spare parts, please consult the manufacturer's official channels or authorized distributors.
