1. تعارف
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinbach 040955 CPS 40-2 Filtration Pump. Please read these instructions carefully before using the pump to ensure proper function and longevity of the product. This pump is designed for filtering pool water up to approximately 19,000 liters capacity and is compatible with Steinbach Classic 300, Classic 250, and ActiveBalls+ filtration systems.
2. حفاظتي هدايتون
Always observe the following safety precautions to prevent injury or damage to the pump.
- برقي حفاظت: Ensure the power supply matches the pump's specifications (240 Volts). Always disconnect the pump from the power supply before performing any maintenance or cleaning. Do not operate the pump with a damaged power cord or plug.
- پاڻي جي حفاظت: Never operate the pump dry. Ensure the pump is fully primed with water before starting. Keep children and pets away from the pump during operation.
- لڳائڻ: Install the pump on a stable, level surface. Ensure adequate ventilation around the pump to prevent overheating.
- گرمي پد: The pump is designed for water temperatures up to 35 degrees Celsius.
3. پراڊڪٽ ختمview
The Steinbach 040955 CPS 40-2 is a robust filtration pump designed for efficient pool water circulation. It features a durable plastic housing and an electric cable power source. The pump is compact and operates quietly.
شڪل 3.1: سامهون view of the Steinbach 040955 CPS 40-2 Filtration Pump.
شڪل 3.2: پاسي view of the pump, showing the inlet and outlet connections.
Figure 3.3: Visual representation of the pump's dimensions, approximately 20 cm (8.2 inches) in height.
Figure 3.4: Product packaging displaying key specifications such as 230V/200W power, 6.5m max head, and 6000 l/h flow rate.
4. سيٽ اپ
Follow these steps for proper installation of your filtration pump:
- پيڪنگ کولڻ: پيڪنگ مان سڀني حصن کي احتياط سان هٽايو. ڪنهن به نقصان جي چڪاس ڪريو.
- لڳائڻ: Position the pump on a firm, level surface near your pool, ensuring it is protected from direct weather exposure and has adequate air circulation.
- نيل ڪنيڪشن: Connect the appropriate hoses (32mm or 38mm diameter) to the pump's inlet and outlet ports. Ensure all connections are secure and watertight to prevent leaks.
- پرائمنگ: Before starting, ensure the pump is fully primed with water. This typically involves filling the pump housing with water until it overflows from the suction port.
- برقي ڪنيڪشن: Connect the pump to a grounded electrical outlet (240V). Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
5. آپريشن
Once the pump is set up and primed, you can begin operation:
- پمپ شروع ڪرڻ: Turn on the power supply to the pump. The pump should start circulating water immediately.
- نگراني: Observe the water flow and pressure. The pump operates quietly, indicating efficient performance.
- هلائڻ جو وقت: The optimal run time for your pump depends on your pool size and usage. Consult your pool system's guidelines for recommended daily filtration cycles.
- بند ڪرڻ: To turn off the pump, simply disconnect it from the power supply.
6. سار سنڀال
Regular maintenance ensures the longevity and efficiency of your filtration pump:
- صفائي: Periodically clean the pump's exterior with a damp ڪپڙو. سخت ڪيميائي استعمال نه ڪريو.
- Filter System Maintenance: This pump works in conjunction with a filtration system. Regularly clean or replace the filter cartridges or media as recommended by your filter system's manual.
- سياري ڪرڻ: If you live in an area with freezing temperatures, disconnect the pump and drain all water from it before winter. Store the pump in a dry, frost-free location.
- نلي جي چڪاس: Regularly check hoses and connections for wear, cracks, or leaks. Replace damaged components as needed.
7. مسئلا حل ڪرڻ
جيڪڏهن توهان کي پنهنجي پمپ سان مسئلا درپيش اچن ٿا، ته هيٺ ڏنل عام مسئلن ۽ حلن جو حوالو ڏيو:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| پمپ شروع نٿو ٿئي | بجلي جي فراهمي ناهي موٽر overheating امپيلر بند ٿي ويو | پاور ڪنيڪشن ۽ سرڪٽ بريڪر چيڪ ڪريو Allow pump to cool down Disconnect power and inspect/clear impeller |
| گهٽ پاڻيءَ جو وهڪرو | پمپ نه پرڻ بند ٿيل فلٽر سکشن لائن ۾ ايئر ليڪ | پمپ کي ٻيهر شروع ڪريو فلٽر کي صاف يا تبديل ڪريو سڀني سکشن لائين ڪنيڪشنن جي سختي چيڪ ڪريو. |
| پمپ شور آهي | سسٽم ۾ هوا impeller ۾ ملبوس پمپ سڪي وڃڻ | سسٽم مان هوا کي ڦوڪيو Disconnect power and clear debris Ensure pump is primed and has continuous water supply |
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ٺاهيندڙ | اسٽين بيچ |
| ماڊل نمبر | 040955 |
| پيداوار جي ماپ (L x W x H) | 22.5 x 15.5 x 33.5 سينٽي (8.86 x 6.1 x 13.19 انچ) |
| وزن | 4 ڪلوگرام (8.82 پائونڊ) |
| وهڪري جي شرح | 6000 l/h (75 Liters per minute) |
| Max. Head Height | 6.5 ميٽر |
| جلدtage | 240 وولٽ |
| بجلي جو استعمال | 200 واٽ |
| مواد | پلاسٽڪ |
| رنگ | ڪارو ، چاندي |
| نلي ڪنيڪشن قطر | 32mm / 38mm |
| وڌ. پاڻي جي درجه حرارت | 35 ℃ |
| سرٽيفڪيشن | تصديق ٿيل مايوسي مفت |
| بين الاقوامي آرٽيڪل ڪوڊ | 9008748409551 |
9. وارنٽي ۽ سپورٽ
Specific warranty information for the Steinbach 040955 CPS 40-2 Filtration Pump is not explicitly provided in the product data. For any product-related inquiries, technical support, or warranty claims, please contact Steinbach customer service directly or refer to the official Steinbach webتفصيلي سپورٽ معلومات لاءِ سائيٽ.
مھرباني ڪري ڪنھن به وارنٽي سان لاڳاپيل معاملن لاءِ خريداري جو ثبوت رکو.
