فلڪ 362 200A اي سي/ڊي سي ڪلوamp ميٽر هدايتون

1. تعارف

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Fluke 362 200A AC/DC Clamp Meter. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

The Fluke 362 is a compact and versatile clamp meter designed for measuring AC and DC current up to 200A, AC and DC voltage up to 600V, resistance up to 3000 Ω, and continuity. Its ergonomic design and robust construction make it suitable for various electrical measurement tasks.

2. حفاظت جي ڄاڻ

WARNING: To prevent possible electrical shock, fire, or personal injury, read all safety information before you use the product.

• هميشه مقامي ۽ قومي حفاظتي ضابطن تي عمل ڪريو.
• جيڪڏهن ميٽر خراب آهي يا غير معمولي طور تي ڪم ڪري رهيو آهي ته ان کي استعمال نه ڪريو.
• Ensure the function switch is in the correct position for the measurement being performed.
• درجه بندي واري حجم کان وڌيڪ لاڳو نه ڪريوtage، جيئن ميٽر تي نشان لڳل آهي، ٽرمينل جي وچ ۾ يا ڪنهن ٽرمينل ۽ زمين جي وچ ۾.
• The Fluke 362 is rated for CAT III 600 V. This rating indicates suitability for measurements in distribution boards, circuit breakers, wiring, including cables, bus-bars, junction boxes, switches, and socket outlets in the fixed installation, and industrial use equipment.
• وول سان ڪم ڪرڻ وقت احتياط استعمال ڪريوtages above 30 V AC RMS, 42 V peak, or 60 V DC. These voltagاهو هڪ جھٽڪو جو خطرو آهي.
• Remove test leads from the circuit before opening the battery cover.
• جڏهن بيٽري جو گهٽ اشارو ظاهر ٿئي ته صحيح پڙهڻ کي يقيني بڻائڻ لاءِ بيٽريون تبديل ڪريو.

3. پراڊڪٽ ختمview

The Fluke 362 clamp meter features a robust design for reliable performance in various environments. Familiarize yourself with its components:

شڪل 1: سامهون view of the Fluke 362 Clamp Meter, showing the display, function dial, jaw, and buttons.

Figure 2: The Fluke 362 Clamp Meter held in a gloved hand, illustrating its compact size and ergonomic design for single-hand operation.

اهم اجزاء:

• موجوده Clamp جبڙو: For non-contact AC/DC current measurements. Features an 18 mm triangular jaw for access in tight spaces.
• فنڪشن ڊائل: Rotary switch to select measurement functions (AC/DC current, AC/DC voltagاي، مزاحمت، تسلسل).
• LCD ڊسپلي: Large, easy-to-read digital display for measurement results.
• هولڊ بٽڻ: ڊسپلي تي موجوده پڙهڻ کي منجمد ڪري ٿو.
• صفر بٽڻ: Used to clear the display for DC current measurements, compensating for any offset.
• ان پٽ ٽرمينلز: For connecting test leads for voltagاي، مزاحمت، ۽ تسلسل جي ماپ.

اهم خاصيتون:

• 200 A AC/DC current measurement capability.
• 600 V AC/DC voltage measurement capability.
• 3000 Ω resistance range.
• Continuity detection with audible indicator.
• Zero function for accurate DC measurements.
• Data hold function to capture readings.
• آسانيءَ لاءِ وڏو، صاف ڊسپلي viewing.
• Compact and lightweight design for one-hand operation.
• CAT III 600 V safety rating.

4. سيٽ اپ

4.1 بيٽري لڳائڻ

The Fluke 362 is battery-powered. Although batteries are not included with all packages, they are required for operation. To install or replace batteries:

1. Ensure the meter is turned OFF and no test leads are connected.
2. ميٽر جي پوئين پاسي بيٽري جي ڪمپارٽمينٽ ڪَوَر کي ڳوليو.
3. ڍڪ کي محفوظ ڪندڙ اسڪرو کي کولڻ لاءِ اسڪرو ڊرايور استعمال ڪريو.
4. Remove the cover and insert the required batteries, observing correct polarity (+/-).
5. Replace the battery cover and tighten the screw(s).

4.2 ٽيسٽ ليڊ ڪنيڪشن

جلد لاءِtage, resistance, and continuity measurements, connect the test leads to the input terminals:

• Insert the black test lead into the “COM” (common) terminal.
• Insert the red test lead into the “VΩ” (voltage/resistance) terminal.

5. آپريٽنگ هدايتون

5.1 پاور آن/آف

Rotate the function dial from the “OFF” position to any desired measurement function to power on the meter. To power off, rotate the dial back to the “OFF” position.

5.2 فنڪشن جي چونڊ

Use the rotary function dial to select the desired measurement mode (e.g., A∼ for AC current, A— for DC current, V∼ for AC voltage, V— for DC voltage, Ω for resistance, or continuity).

5.3 AC/DC ڪرنٽ ماپ (Clamp)

To measure current using the clamp جبڙو:

1. Rotate the function dial to A∼ (AC current) or A— (DC current).
2. For DC current measurements, press the “ZERO” button to clear any offset before clamping.
3. cl کوليوamp ٽرگر کي دٻائڻ سان جبڙو.
4. Enclose only one conductor within the jaw. Ensure the jaw is fully closed.
5. ڊسپلي تي موجوده قدر پڙهو.

5.4 AC/DC Voltage ماپڻ

حجم کي ماپڻ لاءtage:

1. سيڪشن 4.2 ۾ بيان ڪيل ٽيسٽ ليڊز کي ڳنڍيو.
2. Rotate the function dial to V∼ (AC voltage) or V— (DC voltag۽.
3. ٽيسٽ پروبس کي ان سرڪٽ يا جزو سان متوازي ڳنڍيو جنهن کي توهان ماپڻ چاهيو ٿا.
4. جلد پڙهوtage قدر ڊسپلي تي.

5.5 مزاحمت جي ماپ

مزاحمت کي ماپڻ لاء:

1. مزاحمت کي ماپڻ کان اڳ پڪ ڪريو ته سرڪٽ يا جزو ڊي-انرجائيز ٿيل آهي.
2. سيڪشن 4.2 ۾ بيان ڪيل ٽيسٽ ليڊز کي ڳنڍيو.
3. Rotate the function dial to Ω (resistance).
4. ٽيسٽ پروبس کي جزو ۾ ڳنڍيو.
5. ڊسپلي تي مزاحمت جي قدر پڙهو.

5.6 لڳاتار ٽيسٽ

تسلسل ٽيسٽ ڪرڻ لاءِ:

1. پڪ ڪريو ته سرڪٽ يا جزو ڊي-انرجائيز ٿيل آهي.
2. سيڪشن 4.2 ۾ بيان ڪيل ٽيسٽ ليڊز کي ڳنڍيو.
3. Rotate the function dial to the continuity position (often shared with resistance, indicated by a speaker icon).
4. ٽيسٽ پروبس کي جزو يا تار تي ڳنڍيو.
5. The meter will emit an audible tone if continuity is detected (resistance below a certain threshold).

5.7 Zero Function (DC Measurements)

The “ZERO” button is primarily used for DC current measurements. Before taking a DC current reading, with the clamp jaw open and no conductor inside, press the “ZERO” button to eliminate any residual offset and ensure accurate readings.

5.8 ڊيٽا هولڊ فنڪشن

Press the “HOLD” button to freeze the current reading on the display. This is useful for taking readings in hard-to-see locations. Press “HOLD” again to release the reading and return to live measurement.

6. سار سنڀال

6.1 صفائي

ميٽر صاف ڪرڻ لاءِ، ان کي اشتهار سان صاف ڪريوamp ڪپڙو ۽ هلڪو صابڻ. رگڙيندڙ يا محلول استعمال نه ڪريو. استعمال کان اڳ پڪ ڪريو ته ميٽر مڪمل طور تي سڪي ويو آهي.

6.2 بيٽري مٽائڻ

When the low battery indicator appears on the display, replace the batteries promptly to maintain measurement accuracy. Refer to Section 4.1 for battery installation instructions.

6.3 اسٽوريج

If the meter is not used for an extended period, remove the batteries to prevent leakage and damage. Store the meter in a dry, cool environment, away from direct sunlight and extreme temperatures.

7. مسئلا حل ڪرڻ

If you encounter issues with your Fluke 362, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, contact Fluke customer support.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

Fluke products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Fluke webسائيٽ. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

For technical support, service, or calibration, please contact Fluke customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (Fluke 362) and serial number (if applicable) ready.