Livex Lighting Aero 2-Light Bath Light

1. حفاظت جي ڄاڻ

خبردار: To avoid electric shock, always shut off power at the fuse or circuit breaker before installation, servicing, or changing bulbs. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.

هي پراڊڪٽ لازمي طور تي لاڳو ٿيل انسٽاليشن ڪوڊ جي مطابق هڪ شخص طرفان نصب ڪيو وڃي جيڪو پروڊڪٽ جي تعمير ۽ آپريشن ۽ ان ۾ شامل خطرن کان واقف هجي.

2. پراڊڪٽ ختمview

The Livex Lighting Aero 2-Light Bath Light (Model 10102-05) features a sleek, contemporary design suitable for various bathroom aesthetics. It provides soft, diffused light through tubular etched opal glass shades. This fixture can be mounted either horizontally or vertically to suit your preference and space requirements.

Image: The Livex Lighting Aero 2-Light Bath Light shown in both vertical and horizontal mounting orientations, featuring a polished chrome finish and satin opal white glass shades.

اهم خاصيتون:

• جديد ڊيزائن: Elegant modern aesthetic suitable for various interiors.
• پائيدار تعمير: Made from high-quality alloy steel for strength and longevity.
• ورسٽائل چڙهڻ: افقي يا عمدي طور تي نصب ڪري سگھجي ٿو.
• Diffused Lighting: Satin opal white hand-blown twist-lock cylinder glass provides soft, flattering light.
• ختم ڪر: پالش ڪروم.

3. اجزاء جي فهرست

Carefully unpack all parts and check for any damage. Retain all packaging material until you are satisfied with the product. The following components are typically included:

• چڙهڻ واري پليٽ
• چڙهڻ اسڪرو
• Fixture Wire Nuts
• فيڪٽري جسم
• Glass Shades (2)
• Bulb Sockets (2)
• بلب (شامل نه آهي)

Image: An exploded diagram showing the individual components of the Livex Lighting Aero 2-Light Bath Light, including the mounting plate, fixture body, and glass shades.

4. سيٽ اپ ۽ تنصيب

توھان کان اڳ شروع ڪريو: Ensure the power is OFF at the circuit breaker. Read all instructions carefully before proceeding.

Assembling the Fixture (Refer to Fig. 1 in the diagram):

1. Shut off power at the circuit breaker. Remove old fixture and all hardware from the junction box.
2. Unpack your new fixture and lay out all parts on a clean, clear area. Take care not to lose any small parts necessary for installation.
3. Thread the two mounting screws about 1/4" into the pre-drilled holes in the mounting plate, spaced to match the distance apart as the holes in the fixture back plate. Attach the mounting plate to the junction box using two junction box screws as shown. The side of the mounting plate marked "GND" must face out. جنڪشن باڪس شامل نه آهي.
4. ھدايت ڪرڻ واري تارن کي ھلندڙ پليٽ جي وچ ۾ سوراخ ذريعي.
5. وائرنگ جي هدايتن تي احتياط سان عمل ڪريو (ڏسو تصوير 2).
6. ايل کي وڌايوamp body(B) onto the mounting plate, aligning the holes with mounting screws, then lock it securely with the ball nuts(C).
7. Install the light bulbs (not included) in accordance with the fixture's specifications. نوٽ: وڌ ۾ وڌ واٽ نه وڌوTAGاي ريٽنگ!
8. Raise the glass(A) and insert it over the lamp holder, then twist it clockwise until tight.

Connecting the Wires (Refer to Fig. 2 in the diagram):

1. Connect the electrical wires as follows: Connect the Black wire from the fixture to the black house (hot) wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture's ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
2. تار جي ڪنيڪشن کي صاف طور تي وال جنڪشن باڪس ۾ ڇڪيو.

توھان جي انسٽاليشن ھاڻي مڪمل ٿي چڪي آھي. جنڪشن باڪس ڏانهن پاور واپس ڪريو ۽ فڪسچر کي جانچيو.

5. آپريٽنگ هدايتون

The Livex Lighting Aero 2-Light Bath Light operates via a standard wall switch. Ensure the fixture is properly installed and wired according to the instructions in Section 4. Once power is restored to the circuit, use the wall switch to turn the light fixture on or off.

This fixture is compatible with toggle switches, as indicated in the product specifications.

6. سار سنڀال

To maintain the appearance and functionality of your Livex Lighting Aero 2-Light Bath Light, follow these guidelines:

• صفائي: Always turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. For polished chrome finishes, a slightly damp cloth with mild soap can be used, followed by immediate drying to prevent water spots. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
• شيشي جا ڇانو: The satin opal white glass shades can be gently wiped with a soft, damp ڪپڙو. ٻيهر ڳنڍڻ کان اڳ پڪ ڪريو ته اهي مڪمل طور تي سڪي ويا آهن.
• بلب مٽائڻ: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before handling. Use only E12 base bulbs with a maximum wattagاي 60 واٽ في بلب.
• چڪاس: وقت بوقت ڪنهن به ڍڪيل ڪنيڪشن يا خرابي جي نشانين جي جانچ ڪريو. جيڪڏهن ڪو مسئلو ملي ٿو، ته هڪ قابل اليڪٽريشن سان صلاح ڪريو.

7. مسئلا حل ڪرڻ

If your Livex Lighting Aero 2-Light Bath Light is not functioning correctly, refer to the following common issues and solutions:

8. وضاحتون

9. وارنٽي ۽ سپورٽ

وارنٽي ڄاڻ:

This Livex Lighting product comes with a 1 سال وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

ڪسٽمر سپورٽ:

For assistance with parts, assembly, or any other inquiries regarding your Livex Lighting Aero 2-Light Bath Light, please contact customer service:

ڪسٽمر سروس فون: 800-761-8056

Please have your model number (10102-05) available when contacting support.