Behringer NU4-6000 الٽرا-لائيٽ ويٽ 6000W 4-چينل پاور Ampلائفائر جي هدايت نامو

1. تعارف

This manual provides essential information for the safe and efficient operation of your Behringer NU4-6000 Ultra-Lightweight, High-Density, 6000-Watt 4-Channel Power Ampلائفائر. مھرباني ڪري استعمال ڪرڻ کان اڳ ان کي چڱي طرح پڙھو ۽ مستقبل جي حوالي لاءِ ان کي محفوظ رکو.

اهم خاصيتون:

• Delivers 4 x 1600 Watts into 2 Ohms, 2 x 3000 Watts into 4 Ohms, weighing less than 12 lbs / 5.5 kg.
• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup.
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption.
• "Zero-Attack" limiters offer maximum output level with reliable overload protection.
• Built-in stereo crossover with low-cut, high-cut, and full range mode.

2. سيٽ اپ

2.1 Unpacking ۽ لڳائڻ

احتياط سان پيڪ ڪريو amplifier and inspect it for any signs of damage. Place the amplifier in a well-ventilated area, preferably in a standard 19-inch equipment rack. Ensure adequate airflow around the unit to prevent overheating.

2.2 فرنٽ پينل اوورview

• پاور سوئچ: ڦري ٿو ampلائفائر آن / آف.
• Channel Gain Controls: Adjust the input sensitivity for each of the four channels.
• سگنل LEDs: Indicate the presence of an input signal.
• ڪلپ LEDs: Illuminate when the output signal is clipping, indicating potential distortion. Reduce the input level if these LEDs light up frequently.
• پاور LEDs: Indicate the operational status of each channel.

2.3 ريئر پينل اوورview ۽ ڪنيڪشن

• Inputs (CH A, CH B, CH C, CH D): XLR and 1/4-inch TRS combo jacks for connecting audio sources.
• Outputs (CH A, CH B, CH C, CH D): Speakon connectors for connecting speakers.
• موڊ سوئچ: Select between Stereo, Parallel, or Bridged operation for each pair of channels (A/B and C/D).
• ڪراس اوور سوئچ: Select between Full Range, Low-Cut (for subwoofers), or High-Cut (for top speakers) for each pair of channels.
• پاور ان پٽ: Standard IEC power connector.
• سرڪٽ خراب ڪندڙ: Provides overload protection.

2.4 Connecting Audio Sources and Speakers

کي يقيني بڻايو amplifier is turned OFF before making any connections.

1. ان پٽ ڪنيڪشن: پنهنجو آڊيو ذريعو ڳنڍيو (مڪسر، پريamplifier, etc.) to the XLR or 1/4-inch TRS combo inputs on the rear panel. Use balanced cables for optimal noise rejection.
2. اسپيڪر رابطا: Connect your passive speakers to the Speakon outputs. Ensure correct polarity (+ to + and - to -).
3. موڊ جي چونڊ: Use the mode switches to select the desired operation:
   • اسٽيريو: Each channel operates independently, driving a separate speaker.
   • متوازي: Input signal from Channel A is sent to both Channel A and Channel B outputs (and similarly for C/D), allowing both channels to drive speakers with the same mono signal.
   • پل ٿيل: Combines the power of two channels (A+B or C+D) to drive a single, higher-power speaker (typically a subwoofer). Ensure the speaker impedance is compatible with bridged mode (usually 4 or 8 Ohms).
4. ڪراس اوور سيٽنگون: Use the crossover switches to optimize the frequency response for your speakers:
   • مڪمل حد: Sends the full audio spectrum to the speakers.
   • گھٽ ڪٽ: Filters out low frequencies, ideal for top speakers when used with subwoofers.
   • هاء ڪٽ: Filters out high frequencies, ideal for subwoofers.

2.5 Setup Demonstration Videos

3. آپريٽنگ هدايتون

3.1 Powering On and Initial Level Setting

1. Ensure all gain controls on the amplifier are set to their minimum position.
2. Turn on your audio source equipment first.
3. Flip the Power Switch on the Behringer NU4-6000 to the ON position. The Power LEDs should illuminate.
4. Slowly increase the gain controls for each channel until the desired volume is reached. Monitor the Signal and Clip LEDs to avoid distortion.

3.2 Understanding "Zero-Attack" Limiters

The "Zero-Attack" limiters are designed to provide maximum output level with reliable overload protection. They automatically detect when the signal is approaching clipping and dynamically reduce the gain to prevent distortion and protect your speakers.

3.3 Class-D Technology and Switch-Mode Power Supply

The NU4-6000 utilizes revolutionary High-Density Class-D amplifier technology, which ensures cool-running operation with "near-zero" thermal buildup. Coupled with an ultra-efficient switch-mode power supply, the amplifier delivers noise-free audio, superior transient response, and low power consumption, making it ideal for extended use.

3.4 پيداوار ختمview وڊيو

4. سار سنڀال

To ensure the longevity and optimal performance of your Behringer NU4-6000 ampلائفائر، انهن سار سنڀال جي هدايتن تي عمل ڪريو:

• صفائي: باقاعدگي سان ٻاهرئين حصي کي صاف ڪريو amplifier with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure ventilation grilles are free from dust and debris to maintain proper airflow.
• وينٽيليشن: هميشه کي هلائڻ amplifier in a well-ventilated environment. Do not block the ventilation openings. Overheating can severely damage the unit.
• پاور ڪنڊ: Inspect the power cord periodically for any damage. Replace immediately if frayed or broken.
• اسٽوريج: جڏهن ڊگهي عرصي تائين استعمال ۾ نه هجي، ته ذخيرو ڪريو ampلائيفائر کي ٿڌي، سڪل جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري.

5. مسئلا حل ڪرڻ

If you encounter issues with your Behringer NU4-6000, refer to the following common troubleshooting steps:

• طاقت ناهي:
  • Check if the power cord is securely connected to both the ampلائفائر ۽ ڪم ڪندڙ پاور آئوٽليٽ.
  • تصديق ڪريو ته پاور آئوٽليٽ فعال آھي.
  • Check the circuit breaker on the rear panel; reset if tripped.
• آواز ناهي:
  • Ensure all audio input and speaker output cables are correctly and securely connected.
  • Verify that the input source is active and sending a signal.
  • Check the gain controls on the amplifier; ensure they are not set to minimum.
  • Confirm that the correct mode (Stereo, Parallel, Bridged) is selected for your setup.
• Distorted Sound / Clip LED On:
  • Reduce the input gain on the amplifier or the output level from your audio source.
  • Ensure your speakers are correctly matched to the amplifier's impedance and power output.
• گهڻو گرم ٿيڻ:
  • کي يقيني بڻايو amplifier has adequate ventilation and that no vents are blocked.
  • Check speaker impedance; operating with too low an impedance can cause overheating.
  • Reduce the overall volume or continuous high-power operation.

If the problem persists after trying these steps, please contact Behringer customer support.

6. وضاحتون

7. وارنٽي ۽ سپورٽ

Behringer products are designed for reliability and performance. For detailed warranty information, please refer to the warranty card included with your product or visit the official Behringer website. If you require technical support, service, or have any questions regarding your NU4-6000 amplifier, please contact Behringer customer support through their official channels.