AKA AK13017VR

AKA Products Inc. 110 SC IMPACT Wide Short Course RC Tire with Red Insert

Model: AK13017VR - Instruction Manual

1. پراڊڪٽ ختمview

The AKA Products Inc. 110 SC IMPACT Wide Short Course RC Tire is designed for optimal performance in various remote-controlled short course vehicle applications. This tire features a medium-sized lug pattern, providing a balance of durability and grip across different track conditions. Each tire includes a red foam insert for enhanced support and performance.

AKA 110 SC IMPACT Wide Short Course RC Tire with Red Insert

Image: A single AKA 110 SC IMPACT Wide Short Course RC Tire, black with a visible red foam insert inside the rim. The tire features a distinct square lug tread pattern.

2. خاصيتون

  • Medium-Sized Lug Pattern: Engineered to offer a combination of long life and high performance.
  • ورسٽائل ايپليڪيشن: Ideal for a wide range of surfaces, from hard-packed, high-grip tracks to loose and loamy conditions.
  • Red Foam Inserts: Included for consistent tire support and improved handling characteristics.
  • پائيدار تعمير: Designed for the rigors of RC racing and general use.

3. پيڪيج مواد

Each package typically contains the following items:

  • Two (2) AKA 110 SC IMPACT Wide Short Course RC Tires (Medium Compound)
  • Two (2) Red Foam Inserts

Note: Contents may vary slightly based on specific product packaging or retailer.

4. سيٽ اپ ۽ تنصيب

Proper installation is crucial for optimal tire performance. Follow these steps to mount your AKA SC IMPACT tires:

  1. ڦيٿي تيار ڪريو: Ensure your short course wheels are clean and free of debris.
  2. Insert Foam: Carefully place the red foam insert inside the tire. Ensure it sits evenly and without twists.
  3. Mount Tire: Mount the tire onto the wheel. It is recommended to use a tire mounting tool or technique that prevents damage to the tire bead or wheel.
  4. Glue Tire (if applicable): For racing or aggressive driving, it is highly recommended to glue the tire bead to the wheel using a suitable RC tire glue. Apply a thin, even bead of glue around the tire's inner and outer edges where it meets the wheel. Allow sufficient drying time as per the glue manufacturer's instructions.
  5. چڪاس ڪريو: After mounting and gluing, inspect the tire for any gaps, twists, or uneven seating.

Always refer to your RC vehicle's manual for specific wheel and tire compatibility.

5. آپريٽنگ ھدايتون

To maximize the performance and lifespan of your AKA SC IMPACT tires, consider the following:

  • سطح جي چونڊ: These tires are designed for a variety of surfaces. Experiment with tire pressure and vehicle setup to find the best performance for your specific track conditions.
  • Tire Break-in: New tires may require a short break-in period to achieve optimal grip.
  • ٽائر جي گردش: Regularly inspect and consider rotating tires (front to rear, or side to side) to promote even wear, especially if you notice uneven wear patterns.
  • اسٽوريج: Store tires in a cool, dry place away from direct sunlight and extreme temperatures to prevent rubber degradation.

6. سار سنڀال

Regular maintenance helps extend the life and performance of your tires:

  • صفائي: After use, clean dirt and debris from the tires using a soft brush and mild soap and water. Rinse thoroughly and allow to air dry completely. Avoid harsh chemicals or solvents.
  • چڪاس: Periodically inspect tires for cuts, tears, or excessive wear. Check the tire bead for separation from the wheel.
  • Foam Inserts: If foam inserts become waterlogged or damaged, they may need to be replaced to maintain tire performance.

7. مسئلا حل ڪرڻ

If you encounter issues with your tires, consider the following common solutions:

  • Poor Grip:
    • Ensure tires are clean and free of dust or oil.
    • Check for proper tire compound selection for the track surface.
    • Verify foam inserts are correctly seated and not damaged.
    • Adjust vehicle suspension settings.
  • Uneven Wear:
    • Inspect vehicle alignment and suspension components for issues.
    • Consider rotating tires.
    • Review driving style for excessive scrubbing or sliding.
  • Tire Separation from Wheel:
    • Re-glue the tire bead to the wheel using appropriate RC tire glue.
    • Ensure proper surface preparation before gluing.

8. وضاحتون

وصفتفصيل
ماڊل نمبرAK13017VR
ٽائر جو قسم110 SC IMPACT Wide Short Course RC Tire
مرڪبMedium (Super Soft Compound)
داخلRed Foam Inserts
قطر4 انچ (102mm)
ويڪر1.7 انچ (44mm)
پيداوار جي ماپ5.91 x 5.91 x 5.91 انچ
شيءِ جو وزن0.352 اونس
ٺاهيندڙAKA Racing

9. وارنٽي ۽ سپورٽ

For warranty information, technical support, or inquiries regarding your AKA Products Inc. 110 SC IMPACT Wide Short Course RC Tires, please contact AKA Racing directly through their official webسائيٽ يا مجاز ورهائيندڙ. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

AKA Racing is committed to providing high-quality products and customer satisfaction.

لاڳاپيل دستاويز - AK13017VR

اڳيview AKA ٽائر ڪمپائونڊ گائيڊ: صحيح آر سي ٽائر ڪمپائونڊ چونڊڻ
AKA جي RC ٽائر مرڪبن لاءِ هڪ جامع گائيڊ، ٽريڪشن ليول، ٻاهرين گرمي پد، ۽ اندروني ٽريڪ جي حالتن جي تفصيل سان. آسان چونڊ لاءِ رنگ-ڪوڊ ٿيل چارٽ شامل آهي.
اڳيview AKA Smart Pulse Metal Detector User's Manual
Comprehensive user's manual for the AKA Smart Pulse metal detector, covering assembly, operation, controls, troubleshooting, and maintenance.
اڳيview ڊي اي ايس اي انوينٽيڊ (وينٽيڊ فري) يونيورسل فائر باڪس مالڪ جو آپريشن ۽ انسٽاليشن مينوئل
DESA Unvented (Vent-Free) يونيورسل فائر باڪس جي انسٽاليشن، آپريشن، حفاظت ۽ سار سنڀال لاءِ جامع گائيڊ، جنهن ۾ ماڊل VFF ۽ VTFB سيريز شامل آهن. تفصيلي هدايتون، وضاحتون، ۽ وارنٽي جي معلومات مهيا ڪري ٿي.
اڳيview ڊين فاس AKM/AK-مانيٽر/AK-مِمِڪ انسٽاليشن گائيڊ: ريفريجريشن ڪنٽرول سسٽم سافٽ ويئر
ڊين فاس AKM، AK-مانيٽر، ۽ AK-مِمِڪ سسٽم سافٽ ويئر لاءِ جامع انسٽاليشن گائيڊ، ريفريجريشن پلانٽ ڪنٽرول سسٽم جي سيٽ اپ، ترتيب، ۽ ڪنيڪشن جي تفصيل سان.
اڳيview HONOR AKA-L29 تڪڙي شروعات جي ھدايت: سيٽ اپ، حفاظت، ۽ وضاحتون
پنهنجي HONOR AKA-L29 اسمارٽ فون سان شروعات ڪريو. هي جلدي شروعات گائيڊ ڊوائيس سيٽ اپ، بنيادي آپريشن، حفاظتي احتياط، ريگيوليٽري معلومات، ۽ لوازمات کي ڍڪي ٿو.