محور ڪميونيڪيشن Q1615-E نيٽ ورڪ ڪئميرا يوزر دستياب

1. تعارف

The Axis Communications Q1615-E is a 2 Megapixel Network Camera designed for demanding video surveillance conditions. This camera series provides outstanding image quality, even in environments with poor or highly variable lighting.

اهم خاصيتون شامل آهن:

• Lightfinder Technology: Enables the camera to be extremely sensitive to low light, allowing it to capture clear images in near-dark conditions.
• Wide Dynamic Range (WDR) with Dynamic Capture and Forensic Capture: Ensures homogeneous images by balancing extremely bright and dark areas within the same scene, preventing overexposure or underexposure.
• اعلي قرارداد: 2 Megapixel sensor for detailed surveillance footage.
• ورسٽائل چڙهڻ: CS Mount for flexible lens options.
• اندروني / ٻاهرين استعمال: Suitable for both indoor and outdoor surveillance applications.

2. حفاظت جي ڄاڻ

Please read these safety instructions carefully before installing or operating the Axis Q1615-E Network Camera. Failure to follow these instructions may result in injury, damage to the product, or voiding of the warranty.

• Ensure the power source matches the camera's requirements (AC/DC, PoE).
• Do not expose the camera to water or moisture unless it is specifically rated for such conditions.
• ڪئميرا کي گرمي جي ذريعن جي ويجهو يا ڊگهي عرصي تائين سڌي سج جي روشني ۾ رکڻ کان پاسو ڪريو.
• Only use accessories and power adapters approved by Axis Communications.
• مقامي اليڪٽريڪل ڪوڊس جي مطابق، انسٽاليشن قابل اهلڪارن پاران ڪئي وڃي.
• ڪنهن به سار سنڀال يا صفائي ڪرڻ کان اڳ بجلي بند ڪريو.

3. پيڪيج مواد

Upon opening the package, verify that all components are present and undamaged. The standard package for the Axis Q1615-E Network Camera typically includes:

• Axis Q1615-E Network Camera Unit
• انسٽاليشن گائيڊ / دستاويز
• چڙهڻ واري بریکٹ ۽ اسڪرو
• Connector Kit (if applicable)
• Power Supply (may be sold separately depending on region/model)

Image: The retail packaging box for the Axis Communications Q1615-E network camera, showing the brand logo and product information on the tape.

تصوير: مٿي کان هيٺ تائين view of the Axis Communications Q1615-E network camera packaging box, with the branded tape visible across the top.

Image: A close-up of the product label on the Axis Q1615-E camera box, displaying model number (0630-001), serial number (ACCC8E2624B1), software version, and country of origin (Sweden). The EAN/UPC is 7331021045378.

4. سيٽ اپ ۽ تنصيب

4.1. جسماني تنصيب

1. جڳھ چونڊيو: Select a suitable indoor or outdoor location, considering the camera's field of view, lighting conditions, and proximity to power and network connections.
2. چڙهڻ: Secure the camera using the provided mounting bracket and screws. Ensure the mounting surface is strong enough to support the camera's weight.
3. ڪيبل ڳنڍڻ:
   • نيٽ ورڪ ڪيبل: Connect an Ethernet cable from your network switch/router to the camera's Ethernet port.
   • طاقت: Connect the appropriate power supply (AC/DC) or ensure Power over Ethernet (PoE) is active on your network switch if using PoE. The camera operates at 3 watts.

4.2. Initial Network Configuration

1. پاور آن: Once connected, the camera will power on. Allow a few minutes for it to boot up.
2. ڪئميرا دريافت ڪريو: Use the Axis IP Utility or Axis Camera Management software (available on the Axis website) to discover the camera on your network. The camera will typically obtain an IP address via DHCP.
3. پهچ Web انٽرفيس: کوليو a web برائوزر کوليو ۽ ڪئميرا جو IP پتو داخل ڪريو.
4. روٽ پاسورڊ سيٽ ڪريو: سيڪيورٽي لاءِ، توهان کي پهرين رسائي تي هڪ نئون روٽ پاسورڊ سيٽ ڪرڻ لاءِ چيو ويندو.
5. بنيادي سيٽنگون: Configure essential settings such as date/time, network settings (if static IP is desired), and video stream parameters.

5. آپريشن

5.1. Accessing the Camera Interface

To access the camera's live view and configuration settings, open a web browser and enter the camera's IP address. Log in using the root username and the password you set during initial setup.

5.2. لائيو View ۽ رڪارڊنگ

• جيئرو view page displays the real-time video feed from the camera.
• Configure recording settings under the "Recordings" or "Storage" section. You can record to a network share, an SD card (Flash Memory Type: SD), or a Network Video Recorder (NVR).
• Set up recording schedules, continuous recording, or event-triggered recording (e.g., motion detection).

5.3. تصويري سيٽنگون

Adjust image settings to optimize video quality for your specific environment:

• پڌرائي: Fine-tune brightness and contrast.
• ڊي آر ڊي: Enable Wide Dynamic Range for scenes with both very bright and very dark areas.
• Lightfinder: This technology automatically enhances low-light performance.
• Color/Monochrome: Switch between color and monochrome modes as needed.

5.4. حرڪت جي ڳولا ۽ الرٽ

The camera supports motion detection (Alert Type: Motion Only) to trigger events:

• Configure motion detection zones and sensitivity in the camera's event settings.
• Set up actions to be performed upon motion detection, such as recording video, sending email notifications, or uploading images to an FTP server.

6. سار سنڀال

• صفائي: ڪئميرا لينس ۽ هائوسنگ کي نرم، ڊي سان نرميءَ سان صاف ڪريوamp ڪپڙو. استعمال نه ڪريو سخت ڪيميائي يا گھڻائي صاف ڪندڙ.
• فرم ويئر اپڊيٽس: ايڪسس ڪميونيڪيشن کي باقاعدي طور تي چيڪ ڪريو website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features.
• ڪيبل جي چڪاس: وقتي طور تي سڀني ڪيبلن جو معائنو ڪريو ته جيئن انهن جي خرابي يا نقصان جي نشانين لاءِ، خاص طور تي ٻاهرين تنصيب لاءِ.
• ماحولياتي چڪاس: پڪ ڪريو ته ڪئميرا جو آپريٽنگ ماحول مخصوص درجه حرارت ۽ نمي جي حدن اندر رهي.

7. مسئلا حل ڪرڻ

7.1. No Video Feed

• طاقت چيڪ ڪريو: Ensure the camera is receiving power. Verify power adapter connection or PoE status.
• نيٽ ورڪ ڪنيڪشن: Confirm the Ethernet cable is securely connected and the network is active. Check network switch port status.
• IP پتو: Verify the camera's IP address is correct and accessible from your network. Use Axis IP Utility to confirm.
• برائوزر مطابقت: Try accessing the camera from a different web برائوزر.

7.2. خراب تصويري معيار

• صاف لينس: Dust or smudges on the lens can degrade image quality. Clean gently with a soft cloth.
• روشني: Ensure adequate lighting in the surveillance area. Utilize Lightfinder and WDR settings for challenging light conditions.
• فوڪس: If the image is blurry, check the lens focus.
• قرارداد سيٽنگون: Verify that the camera's resolution and compression settings are optimized for your network bandwidth and storage.

7.3. رسائي نه ٿي سگهي Web انٽرفيس

• Incorrect IP Address: Double-check the IP address.
• Network Firewall: Ensure no firewall rules are blocking access to the camera's IP address or port (typically 80 or 443).
• پاسورڊ ري سيٽ: If you forgot the password, refer to the Axis Communications support documentation for password reset procedures (often involves a physical reset button).

8. ٽيڪنيڪل وضاحتون

9. وارنٽي ۽ سپورٽ

For detailed warranty information, please refer to the warranty card included with your product or visit the official Axis Communications webسائيٽ. وارنٽي جون شرطون ۽ ضابطا علائقي جي لحاظ کان مختلف ٿي سگهن ٿا.

For technical support, product registration, or to download the latest firmware and software, please visit the Axis Communications support portal:

ايڪسس ڪميونيڪيشن سپورٽ جو دورو ڪريو

When contacting support, please have your product model number (0630-001) and serial number (found on the product label) ready.