Amazon Basics سنگل مانيٽر اسٽينڊ K001387 هدايت نامو

1. تعارف

The Amazon Basics Single Monitor Stand is designed to free up desktop space and provide ergonomic viewing comfort. This adjustable arm supports LCD monitors up to 32 inches and 25 pounds, offering flexible positioning for an optimized workspace.

The Amazon Basics Single Monitor Stand in black.

2. حفاظت جي ڄاڻ

• Ensure your monitor's weight and size are within the specified limits (up to 32 inches and 25 pounds).
• Always install the monitor arm securely to a stable desk or table.
• Do not overtighten screws, as this may damage the desk or the arm.
• انسٽاليشن دوران ٻارن ۽ پالتو جانور کي پري رکو.
• Adjust tension carefully to prevent sudden monitor movement.

3. پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• Upper arm (1 pc)
• Lower arm (1 pc)
• بنياد (1 پي سي)
• Grommet bracket (1 pc)
• Bracket cover (1 pc)
• M8 (1/4-20UNC, 3 inch) (1 pc)
• M3 x 6mm screw (1 pc)
• M4 x 10mm screw (4pc)
• Cable tie (2 pc)
• Wing nut (1 pc)
• 4mm Allen wrench (1 pc)
• 2.5mm Allen wrench (1 pc)

پيڪيج ۾ شامل سڀئي اجزا.

4. سيٽ اپ

The Amazon Basics Single Monitor Stand offers two installation options: a clamp mount for desk edges and a plate mount for desks with a grommet hole.

4.1. ڪلamp جبل جي انسٽاليشن

1. cl سان ڳنڍيوamp base to the edge of your desk. Ensure the desk thickness is between 0.4 and 2.4 inches.
2. cl کي سخت ڪريوamp securely using the knob until the base is stable.
3. Slide the lower arm onto the vertical pole of the base.
4. Slide the upper arm onto the lower arm.
5. Attach the VESA plate to the back of your monitor using the provided M4 x 10mm screws or thumb screws. The monitor should be VESA compatible (100 x 100mm or 75 x 75mm).
6. Carefully slide the monitor (with the attached VESA plate) onto the end of the upper arm. Ensure it clicks into place.

4.2. Plate Mount Installation

1. If your desk has a grommet hole, center the base over the hole.
2. From the bottom of the desk, slide the clamp plate onto the M8 by 95mm screw, then secure it with the wing nut.
3. Follow steps 3-6 from the Clamp Mount Installation.

Video demonstrating the installation process for the Premium Single Monitor Stand.

5. آپريٽنگ هدايتون

The monitor arm allows for various adjustments to achieve optimal viewزاويه ۽ ergonomic پوزيشن.

5.1. Adjusting Height and Extension

• The arm can extend and retract up to 25 inches, allowing you to pull the monitor closer or push it further away.
• The arm offers a 13-inch height adjustment range. Gently push or pull the monitor to the desired vertical position.

Monitor arm showing vertical height adjustment.

5.2. Adjusting Tilt and Rotation

• The monitor can be tilted 70 degrees backward and 5 degrees forward to find your preferred viewزاويه.
• Rotate the monitor 360 degrees to easily switch between landscape and portrait modes.

Monitor arm showing tilt adjustment for optimal viewing.

5.3. ٽينشن ايڊجسٽمينٽ

If the monitor sags or is too stiff, adjust the tension using the provided Allen wrench:

1. Locate the tension adjustment screw on the arm's joints.
2. Turn clockwise to increase tension (for heavier monitors or if the arm sags).
3. Turn counter-clockwise to decrease tension (if the arm is too stiff).
4. Adjust gradually and test the movement until the desired tension is achieved.

Video demonstrating how to use and adjust the AmazonBasics Single Monitor Arm.

6. سار سنڀال

• Regularly check all screws and connections to ensure they are tight and secure.
• مانيٽر بازو کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلولن کان پاسو ڪريو.
• Periodically check the tension settings to ensure the monitor remains stable and moves smoothly.

7. مسئلا حل ڪرڻ

7.1. Monitor Sags or Drops

• حل: Increase the tension in the arm's joints using the provided Allen wrench. Turn clockwise to tighten.
• چيڪ ڪريو: Ensure your monitor's weight does not exceed the 25-pound limit.

7.2. Arm is Too Stiff to Move

• حل: Decrease the tension in the arm's joints using the provided Allen wrench. Turn counter-clockwise to loosen.

7.3. Monitor Wobbles

• حل: Ensure all mounting screws (VESA plate to monitor, arm to base, and base to desk) are securely tightened.
• چيڪ ڪريو: Verify that the desk surface is stable and not prone to excessive movement.

8. وضاحتون

• برانڊ: Amazon بنياديات
• ماڊل نمبر: ڪي 001387
• مواد: المونيم
• رنگ: ڪارو
• شيء جو وزن: 7.8 پائونڊ
• پيداوار جي ماپ: 25.6 x 6 x 16.2 انچ
• مطابقت رکندڙ ڊوائيسز: مانيٽر
• وڌ ۾ وڌ مانيٽر سائيز: 32 انچ
• وڌ ۾ وڌ وزن جي گنجائش: 25 پائونڊ
• VESA مطابقت: 100 x 100mm and 75 x 75mm
• چڙهڻ جو قسم: ٽيبل ٽاپ ڪلamp / Grommet Mount
• Desk Thickness (Clamp): 0.4 کان 2.4 انچ
• تحريڪ جو قسم: Tilt, Swivel, Rotation, Height Adjustment, Extension/Retraction
• وڌ ۾ وڌ جھڪندڙ زاويه: 70 Degrees (back), 5 Degrees (forward)

9. وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to the documentation included with your product or visit the official Amazon Basics support page.

توهان اضافي وسيلا ۽ رابطي جي معلومات پڻ ڳولي سگهو ٿا ايميزون بيسڪس اسٽور.