Defiant 270 Degree Black Replacement Outdoor Motion Sensor Instruction Manual

1. پراڊڪٽ ختمview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. حفاظت جي ڄاڻ

مھرباني ڪري ھن پراڊڪٽ کي انسٽال ڪرڻ يا هلائڻ کان پھريان سڀ ھدايتون پڙھو ۽ سمجھو. انھن ھدايتن تي عمل ڪرڻ ۾ ناڪامي جي نتيجي ۾ بجلي جو جھٽڪو، باهه، يا ٻيا خطرا ٿي سگھن ٿا جيڪي ملڪيت کي نقصان يا ذاتي زخم پھچائي سگھن ٿا.

• خبردار: برقي جھٽڪو جو خطرو. انسٽاليشن يا سروسنگ کان اڳ سرڪٽ بريڪر يا فيوز باڪس تي بجلي بند ڪريو.
• پڪ ڪريو ته سڀئي بجلي جا ڪنيڪشن مقامي ضابطن ۽ آرڊيننس جي مطابق ٺاهيا ويا آهن.
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• پيڪنگنگ مواد ٻارن کان پري رکو.

3. پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• هدايت نامو (هي دستاويز)

4. وضاحتون

5. تنصيب

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. پاور بند ڪريو: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltagاي جاچ ڪندڙ.
2. پراڻو سينسر هٽايو: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. نئون سينسر تيار ڪريو: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. وائر ڪنيڪشن:
   • ڳنڍيو ڪاري تار from the sensor to the ڪارو (گرم) تار بجلي جي فراهمي کان.
   • ڳنڍيو ڳاڙهو تار from the sensor to the black (load) wire لائيٽ فڪسچر جو.
   • ڳنڍيو سفيد تار from the sensor to the اڇو (غير جانبدار) تار from the power supply and the light fixture.
   • ڳنڍيو زميني تار (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   سڀني ڪنيڪشن کي تار نٽ ۽ برقي ٽيپ سان محفوظ ڪريو.

5. جبل سينسر: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. مهر ڪنيڪشن: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. پاور بحال ڪريو: سرڪٽ بريڪر تي بجلي واپس آن ڪريو.

6. سيٽ اپ ۽ ترتيب

After installation, adjust the sensor's settings for optimal performance.

• ٽيسٽ موڊ: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• حساسيت جي ترتيب: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• وقت جي ترتيب: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. آپريٽنگ هدايتون

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. سار سنڀال

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• صفائي: وقتي طور تي سينسر لينس کي نرم، ڊي سان صاف ڪريوamp cloth to remove dust, dirt, or debris that may obstruct its view. استعمال نه ڪريو abrasive cleaners يا solvents.
• چڪاس: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• رڪاوٽون: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view or cause false triggers.

9. مسئلا حل ڪرڻ

If your motion sensor is not functioning as expected, try the following steps:

10. وارنٽي ۽ سپورٽ

This Defiant motion sensor comes with a 1 سالن جي محدود وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي.

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant webسائيٽ.