1. تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of the Cotek SP-1000-224 Pure Sine Wave Inverter. This inverter is designed to convert 24VDC power to 230VAC, providing a stable and reliable power source for various applications.
اهم خاصيتون:
- حساس اليڪٽرانڪس لاءِ خالص سائن ويو آئوٽ پُٽ.
- Power ON / OFF remote control capability (Green Terminal).
- Input & output fully isolated for enhanced safety.
- Temperature & load controlled cooling fan for optimal performance.
- استعمال ڪندڙ-دوست انٽرفيس.
- Output frequency (50/60 Hz) selectable via DIP switch.
- volاھر وولٽtage selectable via DIP switch.
- Power saving mode adjustable via variable resistor.
- 3-color LED status indicators for easy monitoring.
- Comprehensive input protection: Reverse Polarity (Fuse), Under Voltage ، Over Voltage.
- Robust output protection: Short Circuit, Overload, Over Temperature.
- Type 1 Indoor Aluminum Enclosure.
- E13 / UL / CE / FCC approved.
2. حفاظت جي ڄاڻ
WARNING: Please read and understand all safety instructions before installing or operating this inverter. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- برقي خطرو: This unit produces high voltage. Do not open the inverter casing. سڀني خدمتن کي قابل اهلڪارن جي حوالي ڪريو.
- بيٽري جي حفاظت: Work in a well-ventilated area. Batteries can produce explosive gases. Do not smoke or allow sparks or flames near the battery.
- مناسب وائنٽيليشن: Ensure adequate airflow around the inverter. Do not block ventilation openings.
- ماحولياتي حالتون: Do not expose the inverter to rain, moisture, or excessive dust. Operate in a dry, cool environment.
- گرائونڊنگ: The inverter must be properly grounded. Follow all local and national electrical codes.
- لوڊ گنجائش: Do not exceed the inverter's rated power output. Overloading can cause damage to the inverter and connected devices.
- ڪيليفورنيا پروپوزل 65 خبردار: هن پراڊڪٽ ۾ ڪيليفورنيا پروپوزيشن 65 پاران خبردار ڪيل مواد شامل ٿي سگھي ٿو.
3. پراڊڪٽ ختمview ۽ اجزاء
Familiarize yourself with the various parts of your Cotek SP-1000-224 Pure Sine Wave Inverter.
شڪل 3.1: زاويه view of the Cotek SP-1000-224 Pure Sine Wave Inverter, showing its blue aluminum casing and grey end caps with ventilation and connection ports.
شڪل 3.2: Front panel of the inverter, featuring the AC output socket (Schuko type), a power switch, LED indicators, and DIP switches for configuration.
شڪل 3.3: Rear panel of the inverter, showing the DC input terminals for battery connection, a remote control port (RJ45), and a green terminal block for remote ON/OFF control.
شڪل 3.4: پاسي view of the inverter, highlighting its robust blue aluminum heat sink casing designed for efficient heat dissipation.
شڪل 3.5: A detailed table outlining the features and technical specifications of the Cotek SP-1000 series inverters, including input/output parameters, protections, and certifications.
شڪل 3.6: Mechanical drawings providing dimensions of the inverter, along with power voltage and power temperature curves illustrating performance characteristics.
4. سيٽ اپ ۽ تنصيب
4.1 جڳھ چونڊڻ:
- Install the inverter in a dry, cool, and well-ventilated area.
- Avoid direct sunlight, heat sources, and moisture.
- Ensure sufficient clearance around the inverter for proper airflow, especially around the cooling fan and ventilation openings.
- Mount the inverter securely on a stable, non-combustible surface.
4.2 DC Input Connection:
- پڪ ڪريو ته انورٽر جو پاور سوئچ آف پوزيشن ۾ آهي.
- Connect the positive (+) terminal of the 24VDC battery bank to the positive (+) DC input terminal on the inverter.
- Connect the negative (-) terminal of the 24VDC battery bank to the negative (-) DC input terminal on the inverter.
- Use appropriately sized cables to minimize voltage drop and ensure safe operation. Refer to electrical standards for cable sizing.
- پڪ ڪريو ته سڀئي ڪنيڪشن مضبوط ۽ محفوظ آهن.
4.3 AC Output Connection:
- Plug your AC appliances directly into the AC output socket on the inverter.
- Ensure the total power consumption of all connected appliances does not exceed the inverter's 1000W continuous output rating.
4.4 گرائونڊنگ:
Proper grounding is essential for safety. Connect the inverter's chassis ground terminal to a reliable earth ground using a suitable grounding wire. Consult local electrical codes for specific grounding requirements.
4.5 Remote Control (Optional):
The inverter supports remote ON/OFF control via the green terminal block or an optional RJ45 remote control unit. Refer to the accessory manual for detailed instructions on connecting and using the remote control.
4.6 DIP Switch Configuration:
The inverter features DIP switches on the front panel to select output frequency (50/60 Hz) and output voltage. Refer to the table below for common settings. Ensure the inverter is OFF before changing DIP switch settings.
| سيٽنگ | DIP سوئچ پوزيشن |
|---|---|
| ٻاھر نڪرندڙ فریکوئنسي 50Hz | Switch 1: OFF, Switch 2: OFF (Example, refer to actual product manual/Figure 3.5) |
| ٻاھر نڪرندڙ فریکوئنسي 60Hz | Switch 1: ON, Switch 2: OFF (Example, refer to actual product manual/Figure 3.5) |
| اوٽ وولٽtage 230VAC | Switch 3: ON, Switch 4: OFF (Example, refer to actual product manual/Figure 3.5) |
Note: The exact DIP switch configurations for specific voltage and frequency settings are detailed in the product's full technical specifications (refer to Figure 3.5). Always verify settings before operation.
5. آپريشن
5.1 Powering On the Inverter:
- Ensure all DC and AC connections are secure and correct.
- If using the remote control, ensure it is connected and in the ON position.
- Flip the main power switch on the inverter's front panel to the "ON" position.
- Observe the 3-color LED status indicators. A green light indicates normal operation.
5.2 LED Status Indicators:
- سائو: عام آپريشن.
- زرد/امبر: Warning (e.g., input voltage slightly low/high, minor overload). The inverter may continue to operate but requires attention.
- ڳاڙهو: Fault condition (e.g., severe overload, short circuit, over-temperature, critical input voltage). The inverter will shut down to protect itself and connected devices.
5.3 Power Saving Mode:
The inverter features a power saving mode, adjustable via a variable resistor. This mode reduces power consumption when no load or a very light load is detected. Adjust the resistor to set the sensitivity for entering/exiting power saving mode.
5.4 Powering Off the Inverter:
- Turn off all connected AC appliances.
- Flip the main power switch on the inverter's front panel to the "OFF" position.
- If using a remote control, turn it off as well.
6. سار سنڀال
Regular maintenance ensures the longevity and reliable operation of your inverter.
- صفائي: وقت بوقت انورٽر جي ٻاهرين حصي کي سڪل، نرم ڪپڙي سان صاف ڪريو. مائع صاف ڪندڙ يا سالوينٽس استعمال نه ڪريو. پڪ ڪريو ته وينٽيليشن جا سوراخ مٽي ۽ ملبے کان پاڪ آهن.
- ڪنيڪشن: Periodically check all DC and AC connections to ensure they are tight and free from corrosion. Loose connections can cause overheating and poor performance.
- وينٽيليشن: Ensure the cooling fan and ventilation grilles are not obstructed. The fan operates based on temperature and load, so ensure it can draw and expel air freely.
- بيٽري صحت: Monitor the health of your battery bank. A weak or failing battery can negatively impact inverter performance and lifespan.
WARNING: Do not attempt to service the inverter yourself. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
7. مسئلا حل ڪرڻ
This section provides solutions to common issues you might encounter with your inverter. If the problem persists after following these steps, contact customer support.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Inverter does not turn on (No LED indication) |
|
|
| Red LED is on, inverter shuts down |
|
|
| Yellow/Amber LED is on |
|
|
| ڪابه AC ٻاھر نه |
|
|
8. ٽيڪنيڪل وضاحتون
The following table provides detailed technical specifications for the Cotek SP-1000-224 Pure Sine Wave Inverter. For a comprehensive overview, refer to Figure 3.5.
| پيرا ميٽر | Value (SP-1000-224) |
|---|---|
| ماڊل | ايس ايس-1000-224 |
| AC آئوٽ وولٽtage | 230VAC (selectable) |
| ڊي سي ان پٽ Voltage | 24 وي ڊي سي |
| مسلسل طاقت | 1000W |
| Surge Power (3 sec) | 1750VA |
| ٻاھر ڪڍڻ واري موج | خالص سائن موج (THD <3٪) |
| ٻاھر نڪرندڙ فريڪئنسي | 50/60 Hz (منتخب) |
| Efficiency (Max) | 92% |
| ان پٽ انڊر Voltage تحفظ | 21.0 ± 0.5 وي ڊي سي |
| ان پٽ Over Voltage تحفظ | 33.0 ± 0.5 وي ڊي سي |
| آپريٽنگ جي درجه حرارت | -20°C ~ +40°C (60% power load) |
| طول و عرض (L x W x H) | 17 x 10 x 6 انچ (تقريبن) |
| وزن | 8.94 پائونڊ |
| سرٽيفڪيشن | E13 / UL / CE / FCC منظور ٿيل |
Note: Specifications are subject to change without notice. Always refer to the product label or manufacturer's official documentation for the most accurate and up-to-date information.
9. وارنٽي ڄاڻ
COTEK products are manufactured to high quality standards. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official COTEK webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
Typical warranties cover defects in materials and workmanship under normal use. Damage caused by improper installation, misuse, abuse, or unauthorized modifications is generally not covered.
10. ڪسٽمر سپورٽ
If you have any questions, require technical assistance, or need to report an issue with your Cotek SP-1000-224 Pure Sine Wave Inverter, please contact COTEK customer support or your authorized dealer.
سپورٽ سان رابطو ڪرڻ وقت، مھرباني ڪري ھيٺ ڏنل معلومات تيار رکو:
- Product Model: SP-1000-224
- Serial Number (if applicable, usually found on the product label)
- خريداري جي تاريخ
- توهان جي سامهون ايندڙ مسئلي جو تفصيلي بيان.
For the most up-to-date contact information, please visit the official COTEK webسائيٽ: www.cotek.com.tw (هي هڪ جڳهه وارو آهي) URL, please verify the actual manufacturer webسائيٽ).
