1. تعارف ۽ اوورview
The Neewer MK-300 is a compact and versatile flash unit designed for use with Sony cameras. It offers a powerful guide number, multiple flash modes including E-TTL, Manual, and Multi (stroboscopic), and a clear LCD screen for intuitive operation. This manual provides detailed instructions for setting up, operating, and maintaining your MK-300 flash to achieve optimal lighting results.

Image 1.1: The Neewer MK-300 Flash unit, featuring an LCD display and control buttons.
2. پيڪيج مواد
مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون توھان جي پيڪيج ۾ شامل آھن:
- 1 x Neewer MK-300 Flash for Sony Cameras
- 1 x MK-SH20 Hot Shoe Adapter
- 1 x MK-SH21 Hot Shoe Adapter
- 1 x حفاظتي بيگ
- 1 x هدايت نامو (هي دستاويز)

Image 2.1: The Neewer MK-300 Flash unit, protective carrying bag, and the MK-SH20 and MK-SH21 hot shoe adapters.
3. وضاحتون
| سرڪٽ ڊيزائن | Insulated Gate Bipolar Transistor (IGBT) |
| گائيڊ نمبر | 32 (ISO 100, 105mm) |
| فليش طريقا | E-TTL, M (Manual), MULTI (Stroboscopic) |
| فليش مدت | 1/200s - 1/20000s |
| فليش ڪنٽرول | 1/128 - 1/1 (22 classes of fine adjustment) |
| ريسائيڪل ٽائيم | Approx. 6 seconds (with 2 AA alkaline batteries) |
| رنگ جي درجه حرارت | 5600K |
| فليش ٽائمز | 100 - 1500 times (with AA alkaline batteries) |
| خارجي انٽرفيس | Hot Shoe, USB |
| اضافي افعال | Front curtain sync, Exposure compensation, Power saving mode, Overheat protection, Memory function |
| طول و عرض | 13.11 x 8.2 x 7.19 سينٽي |
| وزن | 49.9 جي |
| مطابقت رکندڙ جبل | سوني |
| رابطي | Wired (Hot Shoe) |
| وائرليس ڪميونيڪيشن | Optical Pulse (Slave mode) |
4. حفاظت جي ڄاڻ
Please read and understand the following safety precautions before using the Neewer MK-300 Flash:
- Do not expose the flash unit to water or extreme humidity.
- Avoid direct eye exposure to the flash, especially at close range, as it can cause temporary vision impairment.
- Do not attempt to disassemble or repair the flash unit yourself. Refer to qualified service personnel.
- Use only recommended AA batteries. Ensure correct polarity when inserting batteries.
- Keep the flash unit away from flammable materials.
- Remove batteries if the flash will not be used for an extended period.
5. سيٽ اپ
5.1 بيٽري لڳائڻ
- فليش يونٽ جي پاسي تي بيٽري جي ڪمري کي ڳوليو.
- بيٽري جي ڪمري واري ڍڪ کي سلائيڊ ڪريو کليل.
- Insert two (2) AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- بيٽري جي ڪمري واري ڍڪ کي محفوظ طور تي بند ڪريو.

تصوير 5.1: مختلف views of the MK-300 flash, showing the battery compartment on the bottom right.
5.2 ڪئميرا تي چڙهڻ
The MK-300 flash comes with two hot shoe adapters (MK-SH20 and MK-SH21) to ensure compatibility with various Sony camera models. Refer to your camera's manual to determine the correct adapter for its hot shoe type.
- Identify the appropriate hot shoe adapter (MK-SH20 or MK-SH21) for your Sony camera.
- Slide the chosen adapter onto your camera's hot shoe until it clicks into place or is securely fastened by its locking mechanism.
- Slide the MK-300 flash unit onto the adapter's hot shoe. Ensure it is fully seated and tighten any locking wheel on the adapter if present.
مطابقت تي نوٽ:
- The MK-SH20 adapter for Sony NEX-3/NEX-5 series cameras does NOT support E-TTL flash mode. Manual mode operation is required for these models.
- The flash is compatible with Sony A7/A7R/A7S/A6000/A3000/NEX-6/NEX-7/A33/A35/A37/A57/A58/A77/A77II/A99 cameras, supporting TTL functionality where applicable.

تصوير 5.2: ويجهو تصوير views of the MK-SH20 and MK-SH21 hot shoe adapters.

Image 5.3: The MK-300 flash mounted on two different Sony camera bodies.
6. آپريٽنگ هدايتون
6.1 پاور آن/آف
To power on the flash, slide the 'OFF / ON' switch to the 'ON' position. To power off, slide the switch to 'OFF'.
6.2 فليش موڊس
کي دٻايو موڊ موجود فليش موڊس ذريعي چڪر ڪرڻ لاءِ بٽڻ:
- E-TTL Mode: Automatic flash exposure. The flash output is automatically controlled by the camera's metering system.
- M (Manual) Mode: Allows you to manually set the flash power output from 1/128 to 1/1. Use the control dial to adjust the power level.
- MULTI (Stroboscopic) Mode: Fires a series of rapid flashes during a single exposure, creating a stroboscopic effect. In this mode, you can set the flash frequency (Hz) and the number of flashes (TIMES).

Image 6.1: The MK-300 flash displaying TTL, Manual (M), and Multi (RPT) modes on its LCD screen.
6.3 Flash Control and Additional Functions
- Power Adjustment (Manual Mode): In M mode, rotate the control dial to increase or decrease the flash power output.
- پائلٽ نور: کي دٻايو پائلٽ button to test fire the flash.
- سامهون واري پردي جي هم وقت سازي: This function synchronizes the flash with the opening of the shutter.
- نمائش جي معاوضي: Adjusts the flash output to fine-tune exposure.
- پاور بچائڻ جو طريقو: The flash will enter a power-saving state after a period of inactivity to conserve battery life.
- گهڻي گرمي کان بچاءُ: The flash unit is equipped with an overheat protection system to prevent damage during continuous high-power firing. If the unit overheats, it will temporarily cease operation until it cools down.
- ميموري فنڪشن: The flash unit retains the last used settings when powered off and on.
7. سار سنڀال
- فليش يونٽ کي نرم، سڪل ڪپڙي سان صاف ڪريو. سالوينٽس يا رگڙيندڙ ڪلينر استعمال نه ڪريو.
- Keep the hot shoe contacts clean and free from dust or debris to ensure proper communication with the camera.
- Store the flash in its protective bag when not in use to prevent scratches and damage.
- Remove batteries if the flash is to be stored for an extended period to prevent leakage.
8. مسئلا حل ڪرڻ
8.1 Flash Does Not Fire
- Ensure the flash is powered on.
- بيٽري جي سطح چيڪ ڪريو ۽ تبديل ڪريو جيڪڏھن ضروري ھجي.
- Verify the flash is securely mounted to the camera's hot shoe via the correct adapter.
- Check camera settings to ensure external flash is enabled.
- If in E-TTL mode, ensure your camera model supports E-TTL with the MK-SH20/MK-SH21 adapter. Some older Sony NEX models may require manual mode.
8.2 Incorrect Exposure
- In Manual mode, adjust the flash power output.
- In E-TTL mode, use flash exposure compensation on your camera or the flash unit if available.
- Check camera ISO and aperture settings.
8.3 Flash Overheating
- If the flash stops firing, it may have entered overheat protection mode. Allow the unit to cool down for several minutes before resuming use.
- Reduce the frequency of high-power flashes.
9. وارنٽي ۽ سپورٽ
Warranty information for the Neewer MK-300 Flash is typically provided at the point of purchase or can be found on the official Neewer webسائيٽ. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
For technical support, troubleshooting assistance, or service inquiries, please contact Neewer customer support through their official webسائيٽ يا پرچون ڪندڙ جنهن کان توهان پراڊڪٽ خريد ڪيو آهي.





