ايميزون بيسڪس ني-ايم ايڇ اي اي/اي اي اي بيٽري چارجر يو ايس بي آئوٽ پُٽ سان

تعارف

خريد ڪرڻ لاءِ مهربانيasing the Amazon Basics Ni-MH AA/AAA Battery Charger with USB Output. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new charger. Please read this manual thoroughly before use and retain it for future reference.

حفاظت جي ڄاڻ

• Use only with Ni-MH AA/AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, Ni-Cd, Li-ion) as this may cause explosion, rupture, or leakage, leading to personal injury or property damage.
• Do not charge 1 or 3 batteries. This charger is designed to charge batteries in pairs (2 or 4 batteries simultaneously).
• Ensure correct battery polarity (+/-) when inserting batteries. Insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
• Do not expose the charger to rain or moisture. Use indoors only.
• Do not disassemble, modify, or attempt to repair the charger. Refer all servicing to qualified personnel.
• ٻارن جي پهچ کان پري رکو.
• جڏهن استعمال ۾ نه هجي يا صفائي ڪرڻ کان اڳ چارجر کي پاور آئوٽليٽ مان ڪڍو.
• Avoid charging batteries in extreme temperatures or direct sunlight.

پيداوار ختمview

The Amazon Basics Ni-MH AA/AAA Battery Charger is designed for efficient and safe charging of your rechargeable batteries. It features multiple charging slots and a convenient USB output port.

اجزاء

• Battery Charging Slots (for AA/AAA Ni-MH batteries)
• USB Output Port (for charging USB-powered devices)
• Power Plug (EU standard)
• LED Indicators (for charging status)

خاصيتون

• 4-hour Ni-MH battery charger with USB port.
• Charges 2 or 4 AA/AAA Ni-MH rechargeable batteries simultaneously.
• Reverse polarity and overcharge protection for safe charging.
• Built-in switching power technology for worldwide use (100-240V AC input).

شڪل 1: سامهون view of the Amazon Basics Ni-MH AA/AAA Battery Charger.

شڪل 2: پوئتي view of the charger showing product label and EU plug.

Figure 3: Close-up of the USB output port located on the side of the charger.

سيٽ اپ ڪريو

1. چارجر کوليو: احتياط سان چارجر کي ان جي پيڪنگ مان هٽايو.
2. نقصان جي چڪاس ڪريو: Check the charger for any visible damage. Do not use if damaged.
3. بيٽريون تيار ڪريو: Ensure the Ni-MH AA/AAA batteries you intend to charge are clean and free from corrosion.

آپريٽنگ هدايتون

بيٽري ڀريندي

1. بيٽري داخل ڪريو:
   • Insert 2 or 4 AA/AAA Ni-MH rechargeable batteries into the charging slots.
   • اهم: When inserting batteries, always insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
   • If charging only 2 batteries, place them side-by-side in two adjacent slots (e.g., the two leftmost slots or the two rightmost slots). The charger cannot charge 1 or 3 batteries.
2. پاور سان ڳنڍيو: Plug the charger directly into a standard 100-240V AC wall outlet.
3. مانيٽر چارجنگ: The LED indicators will illuminate to show the charging status. Refer to the charger's specific LED behavior (e.g., red for charging, green for fully charged).
4. بيٽرين کي هٽايو: Once charging is complete (indicated by the LEDs), unplug the charger from the wall outlet and remove the batteries.

Figure 4: Charger with AA batteries correctly inserted for charging.

Figure 5: Charger with AAA batteries correctly inserted for charging.

USB آئوٽ پورٽ استعمال ڪندي

The charger features a USB output port that can be used to charge USB-powered devices (e.g., smartphones, tablets). This port provides 5.0V at 0.5A output.

1. چارجر کي پاور سان ڳنڍيو: Plug the battery charger into a standard 100-240V AC wall outlet.
2. USB ڊوائيس ڳنڍيو: Connect your USB-powered device to the USB output port on the charger using a compatible USB cable.
3. چارج ڪرڻ: Your device will begin charging. Note that charging batteries and using the USB output simultaneously might affect charging speeds.

Figure 6: Charger plugged into a wall outlet with a USB cable connected to the USB output port.

سار سنڀال

• صفائي: Unplug the charger before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• اسٽوريج: جڏهن استعمال ۾ نه هجي ته چارجر کي ٿڌي، سڪل جاءِ تي سڌو سج جي روشني ۽ نمي کان پري رکو.
• بيٽري رابطا: Periodically check the battery contacts in the charging slots for dust or debris and clean if necessary to ensure proper connection.

مشڪلاتون

وضاحتون

Figure 7: Dimensions of the Amazon Basics Battery Charger.

وارنٽي ۽ سپورٽ

وارنٽي جي معلومات ۽ ڪسٽمر سپورٽ لاءِ، مھرباني ڪري Amazon Basics جي آفيشل سان رجوع ڪريو. webسائيٽ تي وڃو يا سڌو سنئون Amazon ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکو.

وڌيڪ مدد لاءِ، دورو ڪريو: Amazon ڪسٽمر سروس