1. تعارف
This manual provides comprehensive instructions for the installation, operation, and maintenance of the UHPPOTE 125KHz RFID Stand-Alone Door Access Control Keypad (Model HBK-A01). This device is designed to provide secure and convenient access control using both RFID transponder technology and keypad PIN entry.
Key features include contactless RFID operation, full programming directly from the keypad without requiring a computer, and robust construction with an ABS plastic shell. It also incorporates lock output current short circuit protection, enhancing its reliability. The keypad is suitable for various applications, including factories, residential areas, offices, and mechanical/electrical control equipment.
شڪل 1: سامهون view of the UHPPOTE 125KHz RFID Stand-Alone Door Access Control Keypad.
2. دٻي ۾ ڇا آهي
مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون توھان جي پيڪيج ۾ شامل آھن:
- 1 x Access Control Keypad (Model HBK-A01)
- 1 x انگريزي استعمال ڪندڙ دستياب (هي دستاويز)
- 4 x Rubber Plugs (for shell fixing)
- 4 x Self-Tapping Screws (for shell fixing)
Figure 2: The product packaging, showing the included keypad.
3. وضاحتون
| خاصيت | تفصيل |
|---|---|
| آپريٽنگ جلدtage | 12 وي ڊي سي |
| لوڪ جي آئوٽ لوڊ | وڌ. 1.5A |
| موجوده هاڻوڪو | 50 ايم اي |
| RFID ڪارڊ جي گنجائش | 500 استعمال ڪندڙ |
| استعمال ڪندڙ پن جي گنجائش | 500 استعمال ڪندڙ |
| PIN Digits | 4-8 عدد |
| ڪارڊ جو قسم | Standard 125KHz EM (Not compatible with encrypted cards like HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell) |
| Door Relay Time | 0-99 سيڪنڊ |
| External Reader Support | سپورٽ ناهي |
| پنروڪ | سپورٽ ناهي |
| ڪي پيڊ Backlight | سپورٽ ناهي |
| شيل مواد | پلاسٽڪ |
| پيداوار جو وزن | 3.5 اوز (100 گرام) |
| ڪارڊ پڙهڻ جو فاصلو | Max. 2-23/64" (6cm) |
| Shell Dimensions (LxWxH) | 3-15/16" x 3-15/16" x 47/64" (100x100x18.5mm) |
| Door Open Options | Card Only / Password Only / Card + Password / Card or Password |
| ڪم ڪندڙ درجه حرارت | -22 ° F ~ 140 ° F (-30 ° C ~ 60 ° C) |
| ڪم ڪندڙ نمي | 10--90 R RH ، غير ڪنڊنسنگ |
| وائرنگ ڪنيڪشن | اليڪٽرڪ لاڪ، ٻاھر نڪرڻ جو بٽڻ، ٻاھرين گھنٽي |
شڪل 3: پوئتي view and internal circuit board of the keypad, highlighting its components.
4. سيٽ اپ ۽ تنصيب
4.1 جسماني تنصيب
Follow these steps for physical installation of the keypad:
- Carefully open the keypad housing.
- Mount the backplate of the keypad securely to the desired wall or door frame using the provided self-tapping screws and rubber plugs. Ensure the mounting surface is stable.
- Route the necessary wiring through the designated opening in the backplate.
- Attach the main keypad unit to the mounted backplate, ensuring it clicks securely into place.
Figure 4: Illustrated guide for mounting the keypad on a wall.
4.2 وائرنگ ڪنيڪشن
Proper wiring is crucial for the correct operation of the access control keypad. Refer to the diagrams below for connecting the keypad to an electric lock, exit button, and external bell. Ensure all connections are secure and follow local electrical codes.
Wiring Diagram 1: Basic Connection
Figure 5: Basic wiring diagram for power, electric lock (fail-secure/fail-safe), and exit button.
Wiring Diagram 2: With External Power Supply
Figure 6: Wiring diagram including an external 12VDC power supply for the system.
5. آپريٽنگ هدايتون
The UHPPOTE HBK-A01 keypad can be programmed directly using the keypad. Below are common operating procedures. For a visual guide, please refer to the operation video provided.
Video 1: UHPPOTE HBK-A01 Operation Guide. This video demonstrates the programming steps for the access control keypad.
5.1 Change Admin Password
The default admin password is 123456. It is highly recommended to change this immediately after installation for security purposes. The admin password should be 4-8 digits.
- داخل ڪريو: # 123456 # 0 (This enters programming mode and selects the admin password change function).
- Input your new admin password (4-8 digits).
- دٻايو # تصديق ڪرڻ.
- Input the new admin password again to verify.
- دٻايو # تصديق ڪرڻ ۽ نڪرڻ لاءِ.
(Refer to Video 1, timestamp 0:17 - 0:46 for a demonstration of changing the admin password.)
5.2 Add Card Users
This method allows you to add RFID cards to the system for access.
- داخل ڪريو: # [Admin Password] # 1 0 (This enters programming mode and selects the add card user function).
- Place the RFID card you wish to add onto the keypad. The keypad will beep to confirm successful addition.
- If you have more cards to add, place them one by one on the keypad.
- دٻايو # after adding all cards to exit.
(Refer to Video 1, timestamp 0:47 - 0:1:11 for a demonstration of adding card users.)
5.3 Add Card Users with ID Number
You can also add cards by manually entering a user ID number. The user ID number is any 4-digit number from 0001 to 9999.
- داخل ڪريو: # [Admin Password] # 1 1 (This enters programming mode and selects the add card user by ID function).
- Input the 4-digit user ID number (e.g., 0001).
- دٻايو # تصديق ڪرڻ.
- Place the RFID card corresponding to the entered ID number onto the keypad. The keypad will beep to confirm successful addition.
- دٻايو # نڪرڻ.
(Refer to Video 1, timestamp 0:1:12 - 0:1:41 for a demonstration of adding card users with an ID number.)
5.4 Add or Change PIN Users
This procedure allows you to add new PIN users or change existing PINs. The password should be 4-8 digits, and cannot be all zeros.
- داخل ڪريو: # [Admin Password] # 1 2 (This enters programming mode and selects the add/change PIN user function).
- Input the 4-digit user ID number (e.g., 0001).
- دٻايو # تصديق ڪرڻ.
- Input the new 4-8 digit PIN.
- دٻايو # تصديق ڪرڻ.
- Input the new PIN again to verify.
- دٻايو # تصديق ڪرڻ ۽ نڪرڻ لاءِ.
(Refer to Video 1, timestamp 0:1:42 - 0:2:16 for a demonstration of adding or changing PIN users.)
5.5 To Set or Change a PIN of an Added Card
This operation is performed outside of the programming mode. Ensure the card has already been programmed to this keypad.
- Place the added RFID card on the keypad.
- داخل ڪريو: # # (This initiates the PIN change for the presented card).
- Input the new 4-8 digit PIN.
- دٻايو # تصديق ڪرڻ.
- Input the new PIN again to verify.
- دٻايو # to confirm. The keypad will beep to indicate success.
(Refer to Video 1, timestamp 0:2:17 - 0:2:50 for a demonstration of setting or changing a PIN for an added card.)
6. سار سنڀال
To ensure the longevity and optimal performance of your UHPPOTE Access Control Keypad, follow these maintenance guidelines:
- صفائي: Use a soft, dry cloth to clean the keypad surface. Avoid abrasive cleaners, solvents, or excessive moisture, as the unit is not waterproof.
- ماحولياتي حالتون: Ensure the keypad is installed in an environment within the specified working temperature and humidity ranges. Avoid direct exposure to water or extreme temperatures.
- وائرنگ جي چڪاس: Periodically check all wiring connections for any signs of wear, damage, or loose connections. Secure any loose wires to prevent intermittent operation or electrical hazards.
7. مسئلا حل ڪرڻ
If you encounter issues with your access control keypad, refer to the following common problems and their solutions:
| مسئلو | ممڪن سبب / حل |
|---|---|
| Keypad is unresponsive / No power |
|
| RFID card not recognized |
|
| PIN not accepted |
|
| Door lock not activating/deactivating |
|
8. وارنٽي ڄاڻ
UHPPOTE products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official UHPPOTE webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.
9. ڪسٽمر سپورٽ
Should you require further assistance, technical support, or have questions not covered in this manual, please contact UHPPOTE customer service through the following channels:
- آن لائن سپورٽ: Visit the UHPPOTE official webاڪثر پڇيا ويندڙ سوالن، مسئلن جي حل جي رهنمائي، ۽ رابطي جي فارمن لاءِ سائيٽ.
- اي ميل سپورٽ: پنهنجي پراڊڪٽ پيڪنگنگ يا سرڪاري دستاويز جو حوالو ڏيو webوقف ٿيل سپورٽ اي ميل ايڊريس لاءِ سائيٽ.
When contacting support, please have your product model (HBK-A01) and purchase details ready to facilitate a quicker resolution.
