تعارف
The BIOS Professional Wireless Meat Thermometer is designed to accurately measure the internal temperature of various meats during cooking. It features a wireless monitor that receives temperature readings from a stainless steel probe, allowing you to monitor your food from a distance. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Image: The BIOS Professional Wireless Meat Thermometer, showing the main display unit, the stainless steel probe connected by a wire, and the base unit.
پيداوار جا اجزاء
Your BIOS Professional Wireless Meat Thermometer package includes the following components:
- Wireless Display Unit: The main unit with a digital screen for displaying temperature and timer.
- اسٽينلیس سٹیل جاچ: A durable probe designed to be inserted into meat for temperature measurement.
- پروب ڪيبل: Connects the stainless steel probe to the display unit.
- Base Unit/Stand: Provides stability for the display unit and may house the wireless transmitter.
- بيلٽ ڪلپ: Located on the back of the display unit for easy portability.
تصوير: هڪ ويجهو تصوير view of the stainless steel meat probe and its connecting cable.
سيٽ اپ ڪريو
- بيٽري لڳائڻ:
Locate the battery compartment on the back of the wireless display unit. Insert the required batteries (typically AAA, not included) ensuring correct polarity (+/-). Close the battery compartment securely.
Image: The rear side of the thermometer, displaying the battery compartment cover and the integrated belt clip.
- تحقيق ڪنيڪشن:
Insert the jack end of the stainless steel probe cable firmly into the designated port on the side of the wireless display unit. Ensure a secure connection for accurate readings.
- پاور آن:
Slide the ON/OFF switch, usually located on the back or side of the unit, to the "ON" position. The display should illuminate.
آپريٽنگ هدايتون
1. Selecting Meat Type and Doneness (Pre-programmed Settings)
- کي دٻايو گوشت button to cycle through different meat types (e.g., Beef, Poultry, Pork, Fish).
- هڪ دفعو گهربل گوشت جو قسم چونڊيو وڃي، دٻايو TASTE button to select the desired doneness level (e.g., Rare, Medium, Well Done). The target temperature will automatically adjust based on your selection.
2. Manual Temperature Setting
If you prefer to set a custom target temperature:
- کي دٻايو موڊ button until the target temperature setting is highlighted or blinking.
- استعمال ڪريو منٽ ۽ SEC buttons (or up/down arrows if present) to adjust the target temperature to your desired value.
- دٻايو موڊ again to confirm the setting or to exit the setting mode.
3. ٽائمر فنڪشن استعمال ڪرڻ
The thermometer includes a count up/down timer:
- To set a countdown timer: کي دٻايو منٽ ۽ SEC buttons to set the desired time. Press START/STOP شروع ڪرڻ.
- To use as a count-up timer: Ensure the timer is at 0:00, then press START/STOP.
- دٻايو صاف ڪريو ٽائمر کي ري سيٽ ڪرڻ لاء.
4. پروب داخل ڪرڻ
Carefully insert the stainless steel probe into the thickest part of the meat, avoiding bones or gristle. Ensure the probe tip is fully embedded for accurate internal temperature readings.
5. Monitoring Temperature and Alarm
The current internal temperature of the meat will be displayed on the screen. When the meat reaches the set target temperature, an alarm will sound to notify you. The wireless range is approximately 30 meters (100 feet), allowing you to monitor from a distance.
Image: The wireless display unit shown clipped to a jeans pocket, demonstrating its portability during use.
سار سنڀال
- تحقيق جي صفائي: After each use, carefully clean the stainless steel probe with warm, soapy water. Wipe thoroughly with a damp ڪپڙي ۽ مڪمل طور تي سڪي. Do not immerse the probe cable or the display unit in water. The product care instructions specify "Hand Wash Only" for the probe.
- Cleaning the Display Unit: ڊسپلي يونٽ کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. گھڻائي صاف ڪندڙ استعمال نه ڪريو يا پاڻيء ۾ وجھو.
- اسٽوريج: جڏهن استعمال ۾ نه هجي ته ٿرماميٽر ۽ پروب کي صاف، سڪل جاءِ تي رکو.
- بيٽري مٽائڻ: Replace batteries when the display becomes dim or the unit stops functioning correctly. Remove batteries if storing for extended periods to prevent leakage.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڪابه ڊسپلي يا مدھم ڊسپلي ناهي | گهٽ يا ختم ٿيل بيٽريون؛ بيٽري جي غلط انسٽاليشن. | Replace batteries with new ones; Check battery polarity. |
| غلط درجه حرارت پڙھڻ | Probe not fully inserted; Probe tip touching bone/gristle; Damaged probe or cable. | Re-insert probe into thickest part of meat, away from bones; Inspect probe and cable for damage. If damaged, replace probe. |
| ڪوبه وائرليس ڪنيڪشن ناهي | Out of range; Obstructions between units; Interference. | Move display unit closer to the probe; Reduce obstructions; Avoid strong electromagnetic sources. |
| الارم نه ٿو لڳي | Alarm function not enabled; Volume too low. | Ensure alarm is activated in settings; Check for volume controls if available. |
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | 4745928 |
| برانڊ | بايو |
| رابطي ٽيڪنالاجي | وائرليس |
| وائرلیس رينج | 30 م تائين (100 فوٽ) |
| ڊسپلي جو قسم | ڊجيٽل |
| مواد | Stainless Steel (Probe), Plastic (Unit) |
| خاص خاصيتون | Temperature Alarm, Count up/down timer, Pre-programmed settings, Manual temperature setting, Easy-Use Belt Clip |
| پيداوار جي ماپ | 5.08 x 6.6 x 13.51 سينٽي ميٽر (تقريبن 2 x 2.6 x 5.3 انچ) |
| شيءِ جو وزن | 185 گرام (تقريبن 0.4 پائونڊ) |
| طاقت جو ذريعو | بيٽري |
وارنٽي ۽ سپورٽ
For information regarding warranty coverage, product support, or to purchase replacement parts, please refer to the manufacturer's official webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.
Manufacturer: Thermor LTD
