ٽرڪسي 12684 فليش لائيٽ بينڊ يو ايس بي هدايت نامو

1. پراڊڪٽ ختمview

The Trixie 12684 Flash Light Band USB is a rechargeable silicone light band designed to enhance the visibility of your dog in low-light conditions. It features both flashing and continuous light modes and is adjustable to fit various dog sizes.

Image 1.1: The Trixie Flash Light Band USB in green. This flexible silicone band provides illumination for increased visibility.

2. پيڪيج مواد

• 1 x Trixie Flash Light Band (Green, M/L: 50 cm/18 mm)
• 1 x USB چارجنگ ڪيبل

Image 2.1: The included USB charging cable, used to recharge the light band's internal battery.

3. سيٽ اپ ۽ پهريون استعمال

3.1 شروعاتي چارجنگ

1. Locate the charging port on the light band. This is typically covered by a small silicone flap.
2. Connect the small end of the provided USB cable to the light band's charging port.
3. Connect the larger end of the USB cable to a standard USB power source (e.g., computer USB port, USB wall adapter).
4. Allow the device to charge fully before first use. An indicator light will typically change color or turn off when charging is complete.

3.2 Sizing and Adjustment

The Trixie Flash Light Band can be individually adjusted by cutting it to the required length. This ensures a comfortable and secure fit for your dog.

1. Measure your dog's neck circumference to determine the appropriate length.
2. Carefully cut the silicone band to the desired size using sharp scissors. Ensure you cut only the non-illuminated sections and avoid cutting near the LED components or the control unit.
3. Test the fit on your dog, ensuring it is snug but not too tight, allowing two fingers to comfortably fit between the band and your dog's neck.

3.3 Attaching to Your Dog

Once sized, the light band can be placed directly around your dog's neck. It is designed to be worn in addition to, or instead of, a regular collar, depending on your preference and local regulations.

Image 3.1: The light band is rechargeable via USB, protected from splashes, and suitable for all dog sizes after adjustment.

4. آپريٽنگ هدايتون

4.1 پاور آن/آف

To turn the light band on or off, press the power button located on the control unit. The button is typically integrated into the silicone band.

4.2 روشني جا طريقا تبديل ڪرڻ

The light band offers multiple illumination modes: flashing and continuous light. Press the power button repeatedly to cycle through the available modes:

• پهريون پريس: Activates continuous light mode.
• ٻيو پريس: Activates flashing light mode.
• ٽيون پريس: Turns the light band off.

4.3 استعمال جا طريقا

• Always ensure the light band is fully charged before extended use.
• Use the light band during dawn, dusk, or night walks to significantly improve your dog's visibility to pedestrians, cyclists, and motorists.
• While the band is splash-protected, avoid prolonged submersion in water to prevent damage to the electronic components.

Image 4.1: The light band ensures your dog is clearly visible in the dark, enhancing safety.

5. سار سنڀال

5.1 صفائي

To clean the light band, wipe it with a damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the silicone material or electronic components. Ensure the charging port flap is securely closed before cleaning.

5.2 چارج ڪرڻ

Recharge the light band via the USB cable when the light appears dim or stops functioning. Regular charging helps maintain battery health. The battery is rechargeable via USB cable.

5.3 اسٽوريج

Store the light band in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Ensure it is clean and fully charged before storing for extended periods.

6. مسئلا حل ڪرڻ

• Light band does not turn on:
  Ensure the battery is charged. Connect the light band to a USB power source and allow it to charge for at least 30 minutes. Press the power button firmly.
• روشني مدھم يا ٽمٽار آهي:
  The battery may be low. Recharge the light band fully.
• Light band does not hold a charge:
  The internal battery may have reached the end of its lifespan. Contact TRIXIE customer support for assistance.
• Light band does not respond to button presses:
  Ensure the battery is charged. If the issue persists, try resetting by fully discharging and then recharging the unit. If the problem continues, contact customer support.

7. وضاحتون

8. وارنٽي ڄاڻ

This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included with your purchase or visit the official TRIXIE webتفصيلي وارنٽي شرطن ۽ ضابطن لاءِ سائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

9. ڪسٽمر سپورٽ

For further assistance, technical support, or inquiries regarding your Trixie Flash Light Band USB, please contact TRIXIE customer service. Contact information can typically be found on the product packaging or the official TRIXIE webسائيٽ.