MODSTER ویکٹر SR65 اليڪٽرڪ ريسنگ بوٽ استعمال ڪندڙ دستياب

1. تعارف ۽ اوورview

The MODSTER SR65 is a modern 65 cm racing boat equipped with a powerful brushless motor, designed for high-speed performance on water. This model features a self-righting capability, ensuring it can recover its upright position even after capsizing. Its integrated reverse gear significantly enhances maneuverability in confined spaces. The internal components are centrally placed to optimize the boat's center of gravity, contributing to stable and agile handling. Depending on water surface conditions and weather (wind), this boat can achieve speeds of up to 55 km/h.

تصوير 1.1: سامهون واري پاسي view of the MODSTER Vector SR65 Electric Racing Boat, showcasing its sleek red and black design.

2. حفاظت جي ڄاڻ

خبردار:

• Never operate the model on public roads or paths as this could endanger traffic.
• Never use the model in crowded areas, near or directly on people or animals, to prevent property damage and/or personal injury.
• Always ensure the operating area is clear of obstacles and other watercraft.
• Do not operate the boat in salt water, as this can damage internal components.
• Keep hands, face, and loose clothing away from the propeller when the boat is powered on.
• Always disconnect the battery from the boat when not in use or during transport.

3. پيڪيج مواد

مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون توھان جي پيڪيج ۾ شامل آھن:

• MODSTER Vector SR65 RTR Racing Boat
• Integrated Water-Cooled Brushless Motor (BL 2218/2600KV)
• Integrated Water-Cooled Brushless ESC (BL 20A Marine)
• Integrated Waterproof 17g Blue Marine Steering Servo
• 2.4 GHz Transmitter and Receiver
• 3S ليپو چارجر
• 3S 2200 mAh 11.1 V LiPo Battery
• بوٽ اسٽينڊ
• User Manual (German and English)

4. سيٽ اپ

4.1 بيٽري چارج ڪرڻ

Before first use, fully charge the included 3S 2200 mAh 11.1 V LiPo battery using the provided 3S LiPo charger. Follow the charger's instructions carefully. Always charge batteries on a non-flammable surface and never leave charging batteries unattended.

4.2 Transmitter Preparation

Install the required batteries (not included) into the 2.4 GHz transmitter. Ensure the transmitter is powered on before connecting the boat's battery.

4.3 Boat Preparation

1. Place the boat on the included boat stand for stability during preparation.
2. Carefully remove the boat's top hatch.
3. Connect the fully charged 3S LiPo battery to the boat's ESC connector. Ensure the connection is secure.
4. Carefully place the battery inside the boat, ensuring it does not interfere with moving parts.
5. Replace the top hatch, ensuring it is securely fastened to prevent water ingress.

تصوير 4.1: پاسي view of the MODSTER Vector SR65, illustrating its profile for setup and handling.

5. آپريٽنگ هدايتون

5.1 آپريشن کان اڳ جا چيڪ

• Ensure the water body is free of debris, swimmers, and other obstacles.
• Check that the transmitter batteries are fresh and the boat's battery is fully charged.
• Verify that the propeller and rudder move freely and are not obstructed.

5.2 Launching the Boat

Gently place the boat into the water. The propeller will not activate until it is submerged, as a safety feature.

5.3 Controlling the Boat

• اڳتي / ريورس: Use the throttle stick on the transmitter to control the boat's speed and direction. Push forward for acceleration, pull back for reverse.
• ھلائڻ: Use the steering wheel/stick to control the rudder, turning the boat left or right.
• خود حق جي خصوصيت: If the boat capsizes, briefly apply full throttle forward and then reverse. The boat is designed to flip itself back upright. Repeat if necessary.

Image 5.1: The MODSTER Vector SR65 operating in water, demonstrating its agility and speed.

5.4 آپريشن کان پوءِ

After use, retrieve the boat from the water. Disconnect the battery immediately. Dry the boat thoroughly with a soft cloth to prevent corrosion and mold. Store the boat and components in a dry, cool place.

6. سار سنڀال

6.1 صفائي

After each use, especially in non-freshwater environments, rinse the boat's hull, propeller, and rudder with fresh water. Wipe down all surfaces to remove any residue. Ensure no water remains inside the hull.

6.2 Propeller and Rudder Inspection

Regularly inspect the propeller for any damage, nicks, or entanglement with debris. Check the rudder for free movement and ensure its linkage is secure. Replace damaged parts as necessary.

تصوير 6.1: ريئر view of the MODSTER Vector SR65, highlighting the propeller and rudder assembly for maintenance checks.

6.3 بيٽري جي سنڀال

• Always store LiPo batteries at a storage charge (around 3.8V per cell) if not used for extended periods.
• Never fully discharge LiPo batteries, as this can cause irreversible damage.
• Inspect batteries for any swelling or damage before and after each use. Discontinue use if damaged.

6.4 Motor and ESC Cooling

The motor and ESC are water-cooled. Ensure the water intake and outlet are clear of obstructions. Periodically check the cooling lines for kinks or blockages.

7. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your MODSTER Vector SR65.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For detailed warranty information, technical support, or to inquire about spare parts, please refer to the official MODSTER webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.