Skylink SKHU100 Net Internet Hub User Manual

1. پراڊڪٽ ختمview

The Skylink SKHU100 Net Internet Hub serves as the central control unit, or "brain," for your Home Alarm and Automation system. It connects to your home's router to coordinate the activities of all connected sensors and receivers. This hub features a built-in 110dB siren, a backup battery for uninterrupted operation during power outages, and a 4-button keypad for arming and disarming the alarm system.

شڪل 1: The Skylink SKHU100 Net Internet Hub. This image displays the compact, white hub unit with its integrated 4-button keypad (labeled 1-4), a lock/unlock button, and status indicators for Wi-Fi and power. The central display area is visible above the keypad.

اهم خاصيتون:

• Central control unit for the SkylinkNet Alarm System.
• Plug & Play installation for quick setup.
• Integrated 110-decibel siren for audible alerts.
• Supports various SkylinkNet sensors, cameras, and home control receivers.
• Equipped with a backup battery to ensure continuous operation during power outages.

2. سيٽ اپ گائيڊ

Follow these steps to set up your Skylink SKHU100 Net Internet Hub.

2.1 انباڪسنگ ۽ شروعاتي معائنو

1. احتياط سان پيڪنگنگ مان سڀني اجزاء کي هٽايو.
2. Verify that all included components are present: the Internet Hub unit, power adapter, and backup battery.
3. Inspect the hub and accessories for any signs of damage. If any damage is found, do not proceed with installation and contact customer support.

2.2 Connecting the Hub

1. Connect one end of an Ethernet cable (not included) to the LAN port on the back of the Internet Hub.
2. Connect the other end of the Ethernet cable to an available LAN port on your home's internet router.
3. Insert the backup battery into the designated battery compartment on the hub. Ensure correct polarity.
4. Connect the power adapter to the DC input port on the hub, then plug the adapter into a standard electrical outlet.
5. Allow a few moments for the hub to power on and establish a network connection. The status indicators on the hub will illuminate to show connectivity.

2.3 ايپ جي انسٽاليشن ۽ جوڙو ٺاهڻ

1. Download the "SkylinkNet" application from your smartphone's app store (available for iOS and Android).
2. ايپ کوليو ۽ اسڪرين تي ڏنل هدايتن تي عمل ڪريو نئون اڪائونٽ ٺاهڻ يا موجوده اڪائونٽ ۾ لاگ ان ٿيڻ لاءِ.
3. Within the app, select the option to add a new device. The app will guide you through the process of pairing your Internet Hub. This typically involves scanning a QR code on the hub or entering a serial number.
4. Once the hub is successfully paired, you can begin adding and configuring other SkylinkNet sensors and devices through the app.

3. حب هلائڻ

The Skylink SKHU100 Net Internet Hub can be operated via its integrated keypad or through the SkylinkNet smartphone application.

3.1 ڪي پيڊ استعمال ڪندي

The 4-button keypad and the lock/unlock button provide direct control over the alarm system's arming status.

• سسٽم کي هٿياربند ڪرڻ: کي دٻايو تالا button. The system will enter an armed state after a short delay.
• سسٽم کي ختم ڪرڻ: کي دٻايو کولڻ button. The system will disarm.
• Custom Codes: You may configure custom arm/disarm codes using the 1-4 buttons through the SkylinkNet app. Refer to the app's settings for code management.

3.2 Using the SkylinkNet App

The smartphone app offers comprehensive control and monitoring capabilities.

• بازو/ بي هٿيار: Control the alarm system's status remotely.
• ڊوائيس جو انتظام: Add, remove, and configure connected sensors and receivers.
• نوٽيفڪيشن: Receive real-time alerts and status updates.
• ايونٽ لاگ: Review a history of system events.
• سيٽنگون: Customize system settings, siren volume, entry/exit delays, and user permissions.

4. سار سنڀال

Regular maintenance ensures the optimal performance and longevity of your Skylink SKHU100 Net Internet Hub.

4.1 صفائي

• Wipe the exterior of the hub with a soft, dry cloth.
• Do not use liquid cleaners, aerosols, or abrasive solvents, as these can damage the unit.

4.2 بيٽري مٽائڻ

The backup battery provides power during electrical outages. If the hub consistently loses power during outages despite being fully charged, or if the app indicates a low battery status for the hub, the backup battery may need replacement.

1. Disconnect the power adapter from the hub and the wall outlet.
2. Locate the battery compartment, typically on the back or bottom of the unit.
3. Open the compartment and carefully remove the old battery. Note its orientation.
4. Insert a new, compatible lead-acid battery (6 Volts, as per specifications) into the compartment, ensuring correct polarity.
5. Close the battery compartment and reconnect the power adapter.
6. Properly dispose of the old battery according to local regulations.

4.3 فرم ویئر تازه ڪاريون

Skylink may release firmware updates to improve performance, add features, or address security vulnerabilities. These updates are typically managed through the SkylinkNet app. Ensure your hub is connected to the internet and follow app prompts for any available updates.

5. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your Skylink SKHU100 Net Internet Hub.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Skylink customer support for further assistance.

6. وضاحتون

7. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official Skylink webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

Skylink Customer Support:

• Visit the official Skylink webسوالن، سپورٽ وسيلن، ۽ رابطي جي معلومات لاءِ سائيٽ.
• Contact details (phone, email) are typically available on the product packaging or the manufacturer's webسائيٽ.