لا ڪراس ٽيڪنالاجي WS9162IT-SIL وائرليس ٽمپريچر اسٽيشن يوزر مينوئل

1. تعارف

Thank you for choosing the La Crosse Technology WS9162IT-SIL Wireless Temperature Station. This device provides accurate indoor and outdoor temperature readings, featuring a quartz clock and 24-hour time format. It utilizes 868 MHz IT+ technology for reliable wireless transmission up to 100 meters in open fields. This manual will guide you through the setup, operation, and maintenance of your temperature station.

2. حفاظت جي ڄاڻ

• ڊوائيس کي هلائڻ کان پهريان سڀ هدايتون پڙهو.
• مکيه يونٽ کي انتهائي گرمي پد، سڌي سج جي روشني، يا نمي جي سامهون نه آڻيو.
• The outdoor sensor is designed for outdoor use but should be protected from direct rain and snow for extended longevity.
• Use only the specified battery type (AA LR6). Do not mix old and new batteries or different battery types.
• مقامي ضابطن جي مطابق ذميواري سان استعمال ٿيل بيٽرين کي ختم ڪريو.
• ڊوائيس ٻارن جي پهچ کان پري رکو.

3. پيڪيج مواد

• La Crosse Technology WS9162IT-SIL Main Temperature Station Unit
• وائرليس آئوٽ ڊور گرمي پد سينسر
• ھدايت وارو دستور

4. پراڊڪٽ ختمview

The La Crosse Technology WS9162IT-SIL consists of a main display unit and a wireless outdoor sensor. The main unit features an LCD screen displaying indoor and outdoor temperatures, as well as the current time. It can be mounted on a wall or placed on a tabletop. The outdoor sensor transmits temperature data wirelessly to the main unit.

Image 1: La Crosse Technology WS9162IT-SIL Wireless Temperature Station. This image shows the main display unit and the accompanying wireless outdoor sensor, both in a silver finish. The main unit has an LCD screen for displaying temperature and time information.

5. سيٽ اپ

5.1 بيٽري لڳائڻ

1. وائرليس آئوٽ ڊور سينسر لاءِ: Open the battery compartment on the back of the outdoor sensor. Insert the required batteries (typically 2 x AA LR6, not included) according to the polarity markings (+/-). Close the compartment securely.
2. For the Main Temperature Station Unit: Open the battery compartment on the back of the main unit. Insert 2 x AA LR6 batteries (not included) according to the polarity markings (+/-). Close the compartment securely.

اهم: Always insert batteries into the outdoor sensor اڳ inserting them into the main unit to ensure proper synchronization.

5.2 سينسر لڳائڻ

• صحيح درجه حرارت جي پڙهائي کي يقيني بڻائڻ لاءِ، ٻاهرين سينسر کي ڇانوَ واري علائقي ۾ رکو، سڌو سج جي روشني ۽ گرمي جي ذريعن کان پري.
• Ensure the sensor is protected from direct rain and snow.
• Position the sensor within 100 meters (328 feet) of the main unit, ensuring there are minimal obstructions (e.g., thick walls, metal objects) that could interfere with the 868 MHz wireless signal.

5.3 شروعاتي هم وقت سازي

After inserting batteries into both units, the main station will automatically search for the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature will appear on the main unit's display. If the outdoor temperature does not appear, refer to the Troubleshooting section.

6. آپريٽنگ هدايتون

6.1 معلومات ڏيکاري

LCD ڊسپلي هيٺ ڏنل معلومات ڏيکاري ٿو:

• موجوده وقت: Displayed in 24-hour format.
• اندروني درجه حرارت: The temperature measured by the main unit.
• ٻاھرين گرمي پد: The temperature transmitted from the wireless sensor.
• گھٽ بيٽري اشارا: Icons will appear to indicate low battery for either the main unit or the outdoor sensor.

6.2 گرمي پد يونٽ جي چونڊ (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), locate the °C/°F button (usually on the back or side of the main unit) and press it. The display will update to the selected unit.

6.3 Minimum/Maximum Temperature Display

The station records the minimum (MIN) and maximum (MAX) indoor and outdoor temperatures. Press the 'MIN/MAX' button (or similar, refer to specific button labels on your unit) to cycle through the current, minimum, and maximum temperature readings. To reset the MIN/MAX records, press and hold the 'MIN/MAX' button for a few seconds.

6.4 وقت جي ترتيب

The time is typically set automatically via a quartz clock. If manual adjustment is needed, refer to the buttons on the back of the unit (e.g., 'SET', 'MODE', '+', '-') to enter time setting mode and adjust the hours and minutes. The time format is 24-hour.

7. سار سنڀال

7.1 بيٽري مٽائڻ

When the low battery indicator appears on the display, replace the batteries in the respective unit (main station or outdoor sensor). Always replace all batteries in a unit at the same time with new, fresh batteries of the specified type (AA LR6). Follow the battery installation steps in Section 5.1.

7.2 صفائي

ڊسپلي صاف ڪريو ۽ سيasing of the main unit and sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the device.

8. مسئلا حل ڪرڻ

9. وضاحتون

• ماڊل: WS9162IT-SIL
• وقت: Quartz clock, 24-hour format
• اندروني درجه حرارت جي حد: -9.9 ° C کان +59.9 ° C (14.2 ° F کان 139.8 ° F)
• ٻاهرين درجه حرارت جي حد: -39.9 ° C کان +59.9 ° C (-39.8 ° F کان 139.8 ° F)
• درجه حرارت جي قرارداد: 0.1°C (0.2°F)
• Indoor Temperature Reading Interval: هر 15 سيڪنڊ
• تعدد: 868 MHz
• ٽرانسميشن جي حد: Up to 100 meters (328 feet) in open field
• ٽيڪنالاجي: آئي ٽي +
• ڊسپلي جو قسم: ايل سي ڊي
• Power Source (Main Station): 2 x AA LR6 batteries (not included)
• طاقت جو ذريعو (ٻاهرين سينسر): Batteries (type not specified, typically 2 x AA LR6, not included)
• گھٽ بيٽري جو اشارو: ها
• لڳائڻ جا اختيار: Wall mountable or tabletop placement
• اسٽيشن جي ماپ: 80 x 150 x 29.4 ملي ايم (3.15 x 5.91 x 1.16 انچ)
• پيداوار جو وزن: 260 گرام (0.57 پائونڊ)

10. وارنٽي ۽ سپورٽ

La Crosse Technology products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official La Crosse Technology website. For technical support or further assistance, please contact La Crosse Technology customer service through their official channels.