1. تعارف
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
شڪل 1: سامهون view of the Legrand LEG97605 Dimmer Switch.
2. اهم حفاظتي ڄاڻ
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- انسٽاليشن هڪ قابل اليڪٽريشن طرفان يا مقامي اليڪٽريڪل ڪوڊس جي مطابق ڪئي وڃي.
- وڌ ۾ وڌ وات کان وڌيڪ نه ڪريوtagاي درجه بندي 300W.
- پڪ ڪريو ته سڀئي تار ڪنيڪشن محفوظ ۽ صحيح طرح سان موصل آهن.
- هي ڊوائيس صرف اندروني استعمال لاء ٺهيل آهي.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. پيڪيج مواد
انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- هدايت نامو (هي دستاويز)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. تنصيب جون هدايتون
Follow these steps carefully to install your dimmer switch:
- پاور بند ڪريو: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltagاي جاچ ڪندڙ اڳتي وڌڻ کان اڳ.
- لڳائڻ جي جڳھ تيار ڪريو: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- وائرنگ:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- چڙهڻ: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- پاور بحال ڪريو: هڪ دفعو انسٽاليشن مڪمل ٿي وڃي ۽ سڀئي ڪنيڪشن محفوظ ٿي وڃن، سرڪٽ بريڪر تي پاور واپس آن ڪريو.
شڪل 3: مٿي view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- To Dim/Brighten: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
شڪل 4: زاويه view highlighting the rotary control knob.
6. سار سنڀال
Your Legrand dimmer switch requires minimal maintenance.
- صفائي: To clean the surface of the dimmer, wipe with a soft, damp ڪپڙو. گھڙڻ وارا صاف ڪندڙ، محلول، يا سخت ڪيميڪل استعمال نه ڪريو، ڇاڪاڻ ته اهي ختم کي نقصان پهچائي سگهن ٿا.
- چڪاس: نقصان يا ڍلو ڪنيڪشن جي ڪنهن به نشاني لاءِ وقتي طور تي سوئچ جو معائنو ڪريو. جيڪڏهن ڪو مسئلو ملي ٿو، ته بجلي بند ڪريو ۽ هڪ قابل اليڪٽريشن سان صلاح ڪريو.
7. مسئلا حل ڪرڻ
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| روشني doesرندي ناهي. | سوئچ کي بجلي نه آهي؛ غلط وائرنگ. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| روشني ٽمٽار يا گونجندي آهي. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
If the problem persists after attempting these solutions, contact Legrand customer support or a qualified electrician.
8. ٽيڪنيڪل وضاحتون
| خاصيت | تفصيل |
|---|---|
| برانڊ | Legrand |
| ماڊل نمبر | LEG97605 |
| آپريشن موڊ | چالو بند |
| موجوده درجه بندي | 10 Amps |
| واتtage | 300 واٽ |
| رابطي جو قسم | عام طور تي کليل |
| ڪنيڪٽر جو قسم | اسڪرو |
| ٽرمينل | اسڪرو |
| سرڪٽ جو قسم | 1-رستو |
| عمل ڪندڙ جو قسم | روٽري |
| ڪنٽرولر جو قسم | دٻايو بٽڻ |
| رابطي جو مواد | ٽوپي |
| بين الاقوامي تحفظ جي درجه بندي | IP54 |
| چڙهڻ جو قسم | مٿاڇري جبل |
| رنگ | اڇو |
| شيءِ جو وزن | 2.46 اونس |
| تاريخ پهرين دستياب | سيپٽمبر 25، 2015 |
9. وارنٽي ۽ ڪسٽمر سپورٽ
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webتازي رابطي جي تفصيل لاءِ سائيٽ يا پراڊڪٽ پيڪنگنگ.
Legrand Official Webسائيٽ: www.legrand.us
