OPUS BT-C3100 V2.2 يونيورسل بيٽري چارجر هدايت نامو

1. تعارف

The OPUS BT-C3100 V2.2 is an advanced universal battery charger designed for a wide range of rechargeable batteries. It features four independent charging slots, an intuitive LCD display, and multiple operating modes to efficiently charge, discharge, test, and refresh your batteries. This manual provides detailed instructions for safe and effective use of your charger.

2. اهم حفاظتي ڄاڻ

Always read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Use only the provided AC/DC adapter.
• This charger is designed for indoor use only.
• بيٽريون داخل ڪرڻ وقت بيٽري جي مناسب پولارٽي کي يقيني بڻايو.
• غير ريچارجبل بيٽرين کي چارج ڪرڻ جي ڪوشش نه ڪريو.
• Keep the charger and batteries away from water, moisture, and high temperatures.
• The charger includes overheat detection to protect both the batteries and the unit itself from excessive heat. If overheating occurs, the charging current will be reduced to 0mA until the temperature drops below 40 degrees Celsius.
• چارجر کي جدا يا تبديل نه ڪريو.

3. پراڊڪٽ ختمview

The OPUS BT-C3100 V2.2 features a robust design with four independent battery slots, each capable of displaying real-time charging information on the integrated LCD. A cooling fan is incorporated to manage internal temperatures during operation.

شڪل 3.1: سامهون view of the OPUS BT-C3100 V2.2 charger with LCD display.

3.1 اهم خاصيتون

• Four independent charging slots for simultaneous operation.
• LCD display with backlight showing battery voltage, charge/discharge current, charging time, and battery capacity.
• Selectable charging currents: 200mA, 300mA, 500mA, 700mA, 1000mA, 1500mA, 2000mA. (Note: 1500mA and 2000mA are only available when using slot 1 or 4).
• Selectable discharge currents: 200mA, 300mA, 500mA, 700mA, 1000mA (for Li-ion cells only). Default discharge current is 500mA.
• Integrated minus delta voltage (-ΔV) termination for NiCd/NiMh batteries.
• Constant current (CC) and constant voltage (CV) charging for Li-ion batteries.
• Overheat, short-circuit, over-charging, and over-discharging protection.
• New fan cover for improved cooling.

Figure 3.2: Visual representation of the charger's main features.

4. ٽيڪنيڪل وضاحتون

5. سيٽ اپ ۽ شروعاتي استعمال

5.1 پاور اڊاپٽر کي ڳنڍڻ

Connect the provided DC 12V, 3.0A power adapter to the charger's input port located on the back. Plug the adapter into a standard AC 100-240V, 50/60Hz wall outlet. The LCD display will illuminate, indicating the charger is ready for use.

شڪل 5.1: پوئتي view of the charger with power input and cooling fan.

5.2 بيٽريون داخل ڪرڻ

The charger features a classical slider construction to accommodate various battery sizes. Gently insert batteries into the charging slots, ensuring the positive (+) and negative (-) terminals align correctly with the markings in the slots. The charger will automatically detect the battery type (Ni-MH, Ni-Cd, or Li-ion) and display its current voltage.

Figure 5.2: Proper insertion of a battery into a charging slot.

6. آپريٽنگ موڊس

The BT-C3100 V2.2 offers four distinct operating modes, selectable via the 'MODE' button. Each mode serves a specific purpose for battery management.

Figure 6.1: LCD display showing available operating modes.

6.1 موڊ جي چونڊ

After inserting batteries, press the 'MODE' button to cycle through the available modes. Use the 'CURRENT' button to adjust the current for the selected mode, and the 'SLOT' button to select individual slots for specific settings.

• چارج: Charges the battery to its maximum capacity. The LCD displays voltage, current, and accumulated capacity.
• خارج ڪرڻ: Discharges the battery to a safe low voltage. Useful for cycling NiCd/NiMh batteries to reduce memory effect.
• ٽيسٽ: Measures the actual capacity of the battery. The charger will fully charge the battery, then discharge it while measuring the discharged capacity, and finally recharge it. The discharged capacity is displayed.
• QUICK TEST: Measures the internal resistance of the battery. This mode quickly determines the battery's health.
• ريفريش: Cycles the battery through charge and discharge multiple times to restore its full capacity, especially for older NiCd/NiMh batteries.

7. بيٽري مطابقت

The OPUS BT-C3100 V2.2 is compatible with a wide range of rechargeable battery chemistries and sizes.

7.1 Supported Battery Types and Voltages

The charger supports Ni-MH, Ni-Cd, and various Li-ion battery types. For specific Li-ion chemistries (Li-FeO4, high voltage Li-ion), a switch on the board allows selection of different charging termination voltages (3.7V، 4.2V، 4.35V).

Figure 7.1: Supported battery types and their corresponding voltages.

7.2 Supported Battery Sizes

The charger is designed for common battery sizes, including AA (LR6) and AAA (LR3) for NiCd/NiMh, and various 3.7V Li-ion sizes such as 10440, 14500, 16340, 17335, 17500, 18490, 17670, 18650, 26650.

Figure 7.2: The charger accommodates a wide range of battery sizes.

8. چارجنگ جون هدايتون

8.1 Current Selection

The charger allows manual selection of charging and discharging currents. For optimal battery life and safety, it is generally recommended to use lower currents for smaller batteries and higher currents for larger capacity batteries. Note that 1500mA and 2000mA charging currents are only available when using a single battery in slot 1 or slot 4.

8.2 گرمي جو انتظام

During charging and discharging, especially at higher currents, batteries and the charger may generate heat. The BT-C3100 V2.2 is equipped with a cooling fan that activates when the internal temperature or battery temperature exceeds 40°C (104°F). If the battery temperature is sensed to be over 60°C (140°F), the over-heat protection will activate, halting the current working mode for all 4 slots by reducing the charging current to 0mA. Operation will resume once the battery temperature drops below 40°C. Ensure adequate ventilation around the charger during operation.

9. سار سنڀال

• صفائي: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• اسٽوريج: چارجر کي ٿڌي، سڪل جاءِ تي محفوظ ڪريو سڌو سج جي روشني ۽ انتهائي گرمي پد کان پري.
• بيٽري جي سنڀال: Always remove batteries from the charger once the process is complete.

10. مسئلا حل ڪرڻ

• چارجر آن نه ٿي رهيو آهي: پڪ ڪريو ته پاور اڊاپٽر چارجر ۽ وال آئوٽليٽ ٻنهي سان محفوظ طور تي ڳنڍيل آهي. پڪ ڪريو ته آئوٽليٽ ۾ پاور آهي.
• بيٽري نه ملي: Check that the battery is inserted correctly with proper polarity. Ensure the battery is a supported rechargeable type.
• گهڻي گرمي جا مسئلا: If the charger or batteries become excessively hot, ensure the cooling fan is not obstructed. Reduce the charging current if possible. The charger will automatically halt operation if temperatures exceed safe limits.
• گھٽ وولٽtage Battery Recovery: The charger is capable of recovering some deeply discharged batteries. If a battery is too low, the charger may initiate a trickle charge to bring its voltage up before regular charging begins.
• Inaccurate Capacity Readings: Ensure the 'TEST' or 'REFRESH' mode is used for accurate capacity measurement. Allow the full cycle to complete.

11. وارنٽي ۽ سپورٽ

For after-sale service and warranty inquiries, please ensure you have purchased your OPUS BT-C3100 V2.2 charger from the official GBlife brand store. Support and warranty terms are subject to the policies of the authorized seller at the time of purchase.

For further assistance, please refer to the contact information provided with your purchase or visit the official OPUS product support page.