Taylor Wired Digital Indoor/Outdoor Thermometer User Manual

پيداوار ختمview

Stay on top of indoor and outdoor conditions with the Taylor Wired Digital Thermometer. This unit features a large LED display for easy readability and includes a wired probe sensor. It is designed for versatile placement, such as outside a window, in a greenhouse, or any secondary location where temperature monitoring is required. The thermometer simultaneously displays both indoor and outdoor readings in either Fahrenheit or Celsius. Its sleek design, with a black display and white housing, integrates well into various environments including homes, offices, or nurseries. This thermometer is an essential tool for managing HVAC settings, plant care, or simply maintaining general comfort by providing immediate temperature information.

شڪل 1: سامهون view of the Taylor Wired Digital Indoor/Outdoor Thermometer, displaying indoor and outdoor temperatures.

اهم خاصيتون

• ٻٽي درجه حرارت ڊسپلي: Shows daily indoor and outdoor temperatures in either Fahrenheit (°F) or Celsius (°C).
• Long Wired Probe: Equipped with a 10 ft. wired probe for accurate measurement of external temperatures, even in extreme conditions.
• ياداشت جا ڪم: Features daily minimum and maximum temperature recall, allowing you to track temperature fluctuations.
• برف جي خبرداري: Includes an ice alert function to warn of freezing temperatures.
• مربوط ڪلاڪ: A built-in clock provides convenience.
• وڏي LED ڊسپلي: Oversized digits ensure enhanced readability from a distance.
• لچڪدار چڙهڻ: Offers versatile mounting options, including a built-in stand for tabletop use or a wall mount.

سيٽ اپ ۽ تنصيب

1. بيٽري لڳائڻ

The thermometer requires one Lithium Metal battery (CR2025, included). To install or replace the battery:

1. يونٽ جي پوئين پاسي بيٽري جي خاني کي ڳوليو.
2. Remove the battery cover. You may need a small screwdriver to remove a tiny screw if present, or simply unclip the cover.
3. CR2025 بيٽري داخل ڪريو، صحيح پولارٽي (+/-) کي يقيني بڻائي جيئن ڪمري اندر ڏيکاريل آهي.
4. بيٽري جي ڍڪ کي محفوظ طور تي تبديل ڪريو.

شڪل 2: پوئتي view of the thermometer, highlighting the battery compartment and control buttons.

2. Probe Placement

The wired probe is designed to measure outdoor or remote temperatures. For accurate readings:

• Extend the 10 ft. wired probe from the main unit.
• Place the probe sensor in the desired outdoor location, ensuring it is protected from direct sunlight and precipitation for the most accurate readings. Common placements include outside a window, in a shaded area of a garden, or within a greenhouse.
• Ensure the wire is not pinched or damaged when routing it.

شڪل 3: زاويه view of the thermometer with its wired probe.

3. چڙهڻ جا اختيار

The thermometer offers two primary mounting options:

• تعمير ٿيل اسٽينڊ: Utilize the integrated stand on the back of the unit to place it on a desk, shelf, or any flat surface.
• ڀت جبل: Use the keyhole slots on the back of the unit to hang it on a wall using appropriate screws (not included).

شڪل 4: پاسي view demonstrating the built-in stand.

آپريٽنگ هدايتون

ڊسپلي ختمview

The large LED display shows the following information:

• ٻاھرين گرمي پد: Prominently displayed with large digits.
• اندروني درجه حرارت: Shown with smaller digits.
• منٽ / وڌ ۾ وڌ درجه حرارت: Records the lowest and highest temperatures for both indoor and outdoor readings since the last reset.
• وقت: موجوده وقت ڏيکاري ٿو.
• درجه حرارت يونٽ: Indicates whether readings are in Fahrenheit (°F) or Celsius (°C).

تبديل ٿيندڙ درجه حرارت يونٽ (°F/°C)

To switch between Fahrenheit and Celsius, locate the "SET °C/°F" button on the back of the unit and press it. The display will immediately update to the selected unit.

Minimum/Maximum Temperature Recall

The thermometer automatically records the daily minimum and maximum temperatures. These values are typically displayed alongside the current temperature. To reset the min/max readings, refer to the specific instructions on the back of your unit, usually involving a "MODE IN OUT" or "RESET" button press.

ڪلاڪ مقرر ڪرڻ

To set the time, locate the clock setting buttons, usually labeled "SET" or similar, on the back of the unit. Follow the on-screen prompts or refer to the quick start guide that came with your product for precise instructions on adjusting hours and minutes.

سار سنڀال ۽ سنڀال

• صفائي: To clean the thermometer, simply wipe it with a clean, damp ڪپڙو. گھڙڻ وارا صاف ڪندڙ استعمال نه ڪريو يا يونٽ کي پاڻيءَ ۾ نه ٻوڙيو.
• بيٽري مٽائڻ: Replace the Lithium Metal battery (CR2025) when the display becomes dim or stops functioning. Battery life can vary, typically lasting several months to a year depending on usage.
• تحقيق جي سنڀال: Ensure the wired probe is not kinked, cut, or exposed to extreme physical stress. While designed for outdoor use, protecting it from direct harsh elements can prolong its lifespan.
• اسٽوريج: If storing the thermometer for an extended period, remove the battery to prevent leakage and damage to the unit.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information or technical support regarding your Taylor Wired Digital Indoor/Outdoor Thermometer, please contact Taylor customer service. Details can typically be found on the product packaging or the official Taylor webسائيٽ. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

You can visit the official Taylor webوڌيڪ معلومات لاء سائيٽ: Taylor Official Store