WORX WX082L 4V ZipSnip Cordless Electric Scissors User Manual

تعارف

The WORX WX082L 4V ZipSnip Cordless Electric Scissors are designed for effortless cutting of various materials, reducing hand strain compared to traditional scissors. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your new tool.

حفاظت جي ڄاڻ

• Always ensure the tool is switched off and the safety lock is engaged when not in use or during maintenance.
• Keep hands and fingers away from the rotating blade during operation.
• Wear appropriate personal protective equipment, such as cut-resistant gloves, especially when handling or replacing the blade.
• Do not attempt to cut materials beyond the tool's specified capacity.
• Keep the tool dry and away from moisture.

پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

• WORX WX082L 4V ZipSnip بي تار برقي اسڪيسر
• Cutting blade (pre-installed)
• چارجر

پيداوار ختمview

Familiarize yourself with the components of your ZipSnip tool:

1. ڪٽڻ واري پٽي: The rotating blade for cutting materials.
2. بليڊ گارڊ: Provides protection and guides the blade along the cutting surface.
3. محرڪ: Activates the cutting blade when pressed.
4. Lock-out Switch: A safety mechanism that must be engaged before the trigger can activate the blade.
5. چارج پورٽ: Connects the charger to the tool.
6. بيٽري اشاري لائيٽ: موجوده بيٽري چارج ليول ڏيکاري ٿو.

سيٽ اپ ڪريو

بيٽري کي چارج ڪرڻ

The WORX WX082L is equipped with an internal 4V MaxLithium battery. Before first use, or when the battery indicator shows low charge, fully charge the tool.

1. پڪ ڪريو ته اوزار بند ٿيل آهي.
2. Connect the included charger to the charging port on the tool (refer to Figure 4).
3. چارجر کي معياري پاور آئوٽليٽ ۾ لڳايو.
4. The battery indicator light will illuminate to show charging status. Charge until the indicator shows a full charge.
5. Once fully charged, disconnect the charger from the tool and the power outlet.

آپريٽنگ هدايتون

جنرل آپريشن

The ZipSnip is designed for cutting various materials such as cardboard, plastic packaging, fabric, leather, and more. Its compact design and lightweight nature (approximately 0.86 lbs) make it easy to maneuver.

1. مواد تيار ڪريو: ڪٽڻ واري مواد کي هڪ مستحڪم، هموار مٿاڇري تي رکو.
2. Grip the Tool: Hold the ZipSnip firmly with one hand, ensuring a comfortable and secure grip.
3. حفاظت ۾ مشغول ٿيو: Press the lock-out switch (Figure 3) with your thumb.
4. Activate Blade: While holding the lock-out switch, press the trigger to start the rotating blade.
5. ڪٽڻ شروع ڪريو: Guide the tool along the desired cutting line. The flat surface of the blade guard helps maintain a straight cut.
6. ڇڏڻ: Release the trigger to stop the blade. The safety lock will automatically re-engage.

Cutting Different Materials

The ZipSnip is versatile and can handle various materials. For optimal results, ensure the material is laid flat and stable.

سار سنڀال

بليڊ جي بدلي

Over time, the blade may become dull despite its self-sharpening feature. Replace the blade when cutting performance diminishes.

1. Ensure the tool is switched off and the safety lock is engaged.
2. Wear cut-proof gloves for safety.
3. Use a flat-head screwdriver to loosen the screw on the blade counterclockwise.
4. احتياط سان پراڻي بلڊ کي هٽايو.
5. Align the new replacement blade with the electric scissors head hole.
6. Tighten the blade screw clockwise until secure.

صفائي

After each use, clean the blade and surrounding area to remove any debris or material residue. Use a dry cloth or soft brush. Do not use harsh chemicals or abrasive materials.

مشڪلاتون

• اوزار آن نه ٿي رهيو آهي: Ensure the battery is fully charged. Verify that both the lock-out switch and the trigger are pressed simultaneously.
• خراب ڪٽڻ جي ڪارڪردگي: The blade may be dull and require replacement. Check for any material buildup around the blade that might be obstructing its movement.
• بيٽري نه ڀريندي: Ensure the charger is properly connected to both the tool and a working power outlet. Check the charger cable for damage.

وضاحتون

وارنٽي ۽ سپورٽ

The WORX WX082L 4V ZipSnip Cordless Electric Scissors come with a 3 سالن جي ٺاهيندڙ جي وارنٽي.

For technical support, warranty claims, or to purchase replacement parts, please contact Worx customer service or visit their official webسائيٽ. مخصوص رابطي جي تفصيلن لاءِ پنهنجي پراڊڪٽ پيڪنگنگ جو حوالو ڏيو.