Vestil L-270-DP-HD Steel Dual Power Tote Lifter Charger User Manual

1. تعارف

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of the Vestil L-270-DP-HD Steel Dual Power Tote Lifter Charger. Please read this manual thoroughly before operating the equipment to ensure proper usage and to prevent injury or damage.

The Vestil L-270-DP-HD is designed to lift open-bottom skids, boxes, and baskets. It features DC power for lifting and lowering, an on-board battery charger, and automatic side stabilizers for enhanced safety when loads are raised.

2. حفاظت جي ڄاڻ

خبردار: انهن حفاظتي هدايتن تي عمل ڪرڻ ۾ ناڪامي سنگين زخمي يا موت جو سبب بڻجي سگهي ٿي.

• Always operate the lifter on a flat, level, and stable surface.
• Do not exceed the maximum rated capacity of 2200 Lb.
• Ensure the load is centered and stable on the forks before lifting or moving.
• Keep hands and feet clear of moving parts, especially during lifting and lowering operations.
• Do not use the lifter to transport personnel.
• Inspect the unit for damage or wear before each use. Do not operate if damaged.
• Wear appropriate personal protective equipment (PPE) such as safety shoes and gloves.
• ڪنهن به سار سنڀال يا مرمت ڪرڻ کان اڳ بجلي بند ڪريو.
• Ensure the battery charger is used in a well-ventilated area and away from flammable materials.
• The automatic stabilizers engage when the forks reach a specific height. Do not attempt to move the unit when stabilizers are engaged.

3. سيٽ اپ ۽ شروعاتي چارجنگ

3.1 پيڪنگ ۽ چڪاس

1. Carefully remove the lifter from its packaging.
2. Inspect the unit for any visible damage that may have occurred during shipping. Report any damage to the carrier and supplier immediately.
3. Ensure all components are present as per the packing list (if provided).

3.2 شروعاتي بيٽري چارجنگ

The Vestil L-270-DP-HD includes an on-board battery charger. For optimal performance and battery life, fully charge the battery before first use.

• يونٽ تي چارجنگ پورٽ ڳوليو.
• چارجر کي معياري بجلي جي آئوٽليٽ سان ڳنڍيو.
• Allow the battery to charge until the indicator light (if present) shows a full charge. This may take several hours.
• Do not interrupt the charging cycle unnecessarily.

Figure 1: Vestil L-270-DP-HD Tote Lifter in its lowered, transport-ready position. This view highlights the forks and the main body of the unit.

4. آپريٽنگ هدايتون

4.1 Moving the Lifter

The lifter is equipped with front rollers and two rear swivel casters for easy portability. Ensure the forks are in the lowest position before attempting to move the unit.

• هٿ کي مضبوطيءَ سان پڪڙيو.
• Push or pull the unit to the desired location.
• Avoid sudden movements or excessive speed, especially when navigating turns or uneven surfaces.

4.2 Loading and Lifting

1. Position the lifter squarely in front of the open-bottom skid, box, or basket.
2. Carefully insert the forks completely under the load. Ensure the load is centered and stable on the forks.
3. To raise the load, locate the rocker switch on the control panel. Press the "UP" side of the rocker switch. The forks will begin to ascend.
4. Observe the load as it rises. The automatic side stabilizers will engage when the forks reach a specific height, preventing further movement of the unit. Do not attempt to move the lifter once stabilizers are engaged.
5. Raise the load only to the necessary height for transfer or placement.

Figure 2: An operator demonstrating the use of the Vestil L-270-DP-HD Tote Lifter with a red pallet. This image illustrates proper loading and operation posture.

4.3 Lowering and Unloading

1. Ensure the area below the load is clear before lowering.
2. To lower the load, press the "DOWN" side of the rocker switch. The forks will descend.
3. Once the load is fully supported by the ground or its destination, carefully retract the forks from underneath.
4. Return the forks to the lowest position when the unit is not in use or when moving it.

Figure 3: Vestil L-270-DP-HD Tote Lifter with its forks in a raised position, demonstrating the lifting capability and the engagement of the automatic stabilizers.

5. سار سنڀال

Regular maintenance ensures the longevity and safe operation of your Vestil L-270-DP-HD Tote Lifter.

5.1 Daily/Pre-Operation Checks

• Inspect for any visible damage, loose fasteners, or leaks.
• Check the condition of the wheels and casters for wear or obstructions.
• Verify that the rocker switch operates smoothly and the lifting/lowering functions respond correctly.
• Ensure the automatic stabilizers engage and disengage properly.

5.2 بيٽري جي سنڀال

• Recharge the battery after each shift or when the battery indicator shows low charge.
• Avoid completely discharging the battery, as this can reduce its lifespan.
• بيٽري ٽرمينلز کي صاف ۽ سنکنرن کان پاڪ رکو.
• Store the unit in a dry, temperate environment when not in use. If storing for extended periods, ensure the battery is fully charged and periodically recharged.

5.3 صفائي

اشتهار سان يونٽ جي ٻاهرئين حصي کي صاف ڪريوamp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish or electrical components.

6. مسئلا حل ڪرڻ

For issues not listed above or if solutions do not resolve the problem, contact Vestil customer support or a qualified service technician.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

For warranty information, technical support, or to order replacement parts, please contact Vestil Manufacturing Corp. directly. Refer to your purchase documentation for specific warranty terms and contact details.

ٺاهيندڙ: ويسٽل

Webسائيٽ: www.vestil.com