1. تعارف
This manual provides essential information for the proper setup, operation, and maintenance of your Rockville RPG10 Bundle. This PA package combines powered top speakers, powered subwoofers, and mounting poles to create a versatile sound system suitable for various applications.
2. پيڪيج مواد
The Rockville RPG10 Bundle includes the following components:
- (2) Rockville RPG10 10" Powered Active 2-Way DJ PA Speakers (600W Peak / 150W RMS each)
- (2) Rockville RBG12S Bass Gig 12" Active Powered PA Subwoofers (1400W Peak / 350W RMS each)
- (2) Rockville RSP36 36" Mounting Poles for Subwoofer to Speaker
3. مصنوعات جون خاصيتون
3.1 RPG10 Powered Active Speakers
- 10" long-throw woofer with 2" aluminum voice coil.
- 1.35" titanium compression driver for full-range sound.
- Power: 150-Watt RMS / 300-Watt Program / 600-Watt Peak per speaker.
- Frequency Response: 45 Hz-20 kHz.
- تعمير ٿيل ڪلاس AB amplifier and 2-band EQ.
- Multiple Mic/Line inputs for flexible use.
3.2 RBG12S Active Powered Subwoofers
- 12" driver with 80 oz magnet and 2" voice coil.
- Power: 350-Watt RMS / 700-Watt Program / 1400-Watt Peak per subwoofer.
- Frequency Response: 50 Hz-2000 Hz.
- Adjustable 55 Hz-800 Hz crossover.
- Polarity and level controls.
- XLR/TRS inputs and thru outputs.
- 7-layer birch baffle for durable performance.
3.3 RSP36 Mounting Poles
- 36-inch length.
- 35 mm pole diameter.
- 200 lb load capacity.
- Designed to fit standard pole cups on subwoofers and top speakers.
4. سيٽ اپ جون هدايتون
4.1 پيڪنگ ۽ شروعاتي معائنو
Carefully remove all components from the packaging. Inspect each item for any signs of damage. Retain all packaging materials for future transport or storage.
4.2 Assembling the Speaker System
- Position Subwoofers: Place the two RBG12S subwoofers in your desired locations. Ensure they are on a stable, flat surface.
- Insert Mounting Poles: Insert one RSP36 mounting pole into the pole mount on top of each RBG12S subwoofer. Secure the pole by tightening any locking mechanisms on the subwoofer's pole mount.
- Mount Top Speakers: Carefully lift one RPG10 powered speaker and place its pole mount onto the top of an RSP36 pole. Repeat for the second RPG10 speaker. Ensure the speakers are securely seated on the poles.
4.3 سسٽم کي ڳنڍڻ
Follow these steps to connect your PA system:
- پاور ڪنيڪشن: Connect the power cables to the power inputs on the rear panel of each RPG10 speaker and RBG12S subwoofer. Plug the other end into a suitable power outlet.
- Signal Chain (Mixer to Subwoofer): Connect your audio source (e.g., mixer) to the input of the first RBG12S subwoofer using an XLR cable.
- Subwoofer to Subwoofer (Optional): If using both subwoofers in a stereo or linked setup, connect the 'THRU' output of the first RBG12S to the input of the second RBG12S.
- Subwoofer to Top Speaker: Connect the 'LINE OUT' (or 'THRU' if available and appropriate) of each RBG12S subwoofer to the 'LINE IN' (XLR or 1/4" TRS) of the corresponding RPG10 powered speaker. This sends the processed signal from the subwoofer to the top speaker.
4.4 Video Guide for Subwoofer Connections
For a visual guide on connecting the RBG12S subwoofer, please refer to the video below:
4.5 Video Guide for Dual Speaker Mounting
For general guidance on mounting multiple speakers on a single pole, which can be adapted for your RSP36 poles, please watch this video:
5. آپريٽنگ هدايتون
5.1 پاور آن/آف
After all connections are made, turn on your audio source (e.g., mixer) first, then power on the RBG12S subwoofers, and finally the RPG10 powered speakers. When powering off, reverse the sequence: turn off speakers, then subwoofers, then the audio source.
5.2 Adjusting Sound Levels
- RPG10 Speakers: Use the GAIN knob to adjust the input sensitivity for the top speakers. The BASS and TREBLE controls allow you to fine-tune the high and low frequencies.
- RBG12S Subwoofers: The VOL (Volume) knob controls the output level of the subwoofer. The LPF (Low Pass Filter) knob adjusts the crossover frequency (55 Hz-800 Hz), allowing you to blend the subwoofer's output with the top speakers. The POLARITY switch can be used to optimize bass response depending on speaker placement.
5.3 ان پٽ ڪنيڪشن
The RPG10 speakers feature XLR, 1/4'' TS, and RCA audio inputs. The RBG12S subwoofers offer XLR/TRS inputs for balanced connections.
6. سار سنڀال
- صفائي: Use a soft, dry cloth to clean the speaker and subwoofer enclosures. Avoid using abrasive cleaners or solvents.
- اسٽوريج: جڏهن استعمال ۾ نه هجي، ته سسٽم کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي ذخيرو ڪريو.
- سنڀالڻ: Always use the integrated handles for lifting and carrying the speakers and subwoofers. Be cautious when moving the assembled system.
7. مسئلا حل ڪرڻ
- آواز ناهي: Ensure all power cables are securely connected and units are powered on. Check all audio cables for proper connection and integrity. Verify volume levels on all components (mixer, subwoofers, speakers).
- مسخ ٿيل آواز: Reduce the volume level on your audio source, subwoofers, or speakers. Check for damaged cables. Ensure input signals are not clipping (indicated by clip lights on the units).
- گوڙ يا شور: Ensure all components are properly grounded. Try using balanced XLR cables for longer runs. Check for interference from other electronic devices.
8. وضاحتون
8.1 General System Specifications
- شيء جو وزن: 161 پائونڊ
- پيداوار جي ماپ: 16 x 12.5 x 21.5 انچ
- Material: Metal (grilles), ABS (speakers), Birch (subwoofers)
- رنگ: ڪارو
- پاور جو ذريعو: ڪنڊڊ اليڪٽرڪ
8.2 RPG10 Speaker Specifications
- ووفر سائيز: 10 انچ
- RMS پاور: 150W
- چوٽي پاور: 600W
- تعدد جواب: 45 Hz-20 kHz
- رڪاوٽ: 8 Ohms
- Audio Input: XLR, 1/4'' TS, RCA
8.3 RBG12S Subwoofer Specifications
- ووفر سائيز: 12 انچ
- RMS پاور: 350W
- چوٽي پاور: 1400W
- تعدد جواب: 50 Hz-2000 Hz
- Adjustable Crossover: 55 Hz-800 Hz
- Audio Input: XLR, 1/4'' TRS
9. ڪسٽمر سپورٽ
For any inquiries or assistance with your Rockville RPG10 Bundle, please contact the seller, Audiosavings, directly. They offer customer support and can provide further guidance.
