تعارف
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
شڪل 1: سامهون view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
سيٽ اپ ڪريو
1. Unpacking ۽ انسپيڪشن
- احتياط سان پرنٽر ۽ سڀني لوازمات کي پيڪنگ مان هٽايو.
- تصديق ڪريو ته پيڪنگ سلپ ۾ درج ٿيل سڀئي جزا موجود آهن.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. بيٽري لڳائڻ ۽ چارج ڪرڻ
- پڪ ڪريو ته پرنٽر بند ٿيل آهي.
- Locate the battery compartment on the printer.
- Insert the battery, ensuring proper alignment with the contacts.
- بيٽري جي ڪمري کي محفوظ طور تي بند ڪريو.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. ٿرمل پيپر لوڊ ڪندي
- ڪاغذ جي دٻي جو ڍڪ کوليو.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- بلوٽوٿ: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). ڳولھيو available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- سيريل: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
آپريٽنگ هدايتون
1. پاور آن/آف
- پاور آن ڪرڻ لاءِ، پاور بٽڻ کي دٻايو ۽ رکو جيستائين ڊسپلي روشن ٿئي.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Printing a Receipt
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Using the LCD Display
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
سار سنڀال
1. پرنٽ هيڊ کي صاف ڪرڻ
- Power off the printer and disconnect it from any power source.
- ڪاغذ جو دٻو کوليو.
- Gently wipe the print head surface with a lint-free cloth dampisopropyl شراب سان ختم.
- پرنٽر کي بند ڪرڻ ۽ پاور آن ڪرڻ کان اڳ پرنٽ هيڊ کي مڪمل طور تي سڪي وڃڻ ڏيو.
- Perform this cleaning regularly, especially if print quality degrades.
2. بيٽري جي سنڀال
- بيٽري جي زندگي کي وڌائڻ لاءِ، بيٽري کي بار بار مڪمل طور تي ڊسچارج ڪرڻ کان پاسو ڪريو.
- Store the printer and battery in a cool, dry place when not in use for extended periods.
- Use only genuine Intermec replacement batteries.
3. عام صفائي
پرنٽر جي ٻاهرين حصي کي نرم، ڊي سان صاف ڪريو.amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| پرنٽر آن نه ٿي رهيو آهي | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| ڪابه پرنٽ آئوٽ پُٽ ناهي | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| خراب پرنٽ معيار | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| رابطي جا مسئلا | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نالو | PB51B33004100 |
| ڇپائي ٽيڪنالاجي | سڌو حرارتي |
| پرنٽر آئوٽ | مونوڪروم |
| وڌ ۾ وڌ ميڊيا سائيز | 4 انچ |
| رابطي ٽيڪنالاجي | USB, Serial, Bluetooth |
| شيءِ جو وزن | 42 Ounces (approx. 2.63 lbs) |
| پيڪيج جي ماپ | 10.2 x 10 x 5 انچ |
| ڪنٽرولر جو قسم | Android (مطابقت رکندڙ) |
| ٺاهيندڙ | انٽرميڪ |
وارنٽي ۽ سپورٽ
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) webتفصيلي وارنٽي شرطن ۽ ضابطن لاءِ سائيٽ.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
