1. تعارف
This manual provides detailed instructions for the safe and effective operation of the OWON XDS3102 Digital Oscilloscope. The XDS3102 is a versatile 4-in-1 instrument, combining the functions of a digital storage oscilloscope, datalogger, multimeter, and waveform generator. It features a 100 MHz bandwidth, 1 GS/s sample rate, and an 8-bit resolution ADC for precise waveform analysis.
شڪل 1: سامهون view of the OWON XDS3102 Digital Oscilloscope, showing the display, control panel, and input connectors.
2. اهم خاصيتون
- بينڊوڊٿ: 100 MHz
- Sampشرح: 1 GS/s
- قرارداد: 8-bit ADC for detailed waveform restoration
- چينل: 2
- Vertical Sensitivity: 1 mV/div - 10 V/div with low background noise
- ڏيکاريو: 8-inch 800 x 600 high-resolution LCD
- ملٽي فنڪشنلٽي: Digital Storage Oscilloscope, Datalogger, Multimeter, Waveform Generator
- Advanced Triggering: Xvisual multi-trigger functions
- Bus Decoding: Supports various bus decoding functions (optional: RS232, SPI, I2C, CAN)
3. پيڪيج مواد
پڪ ڪريو ته هيٺ ڏنل سڀئي شيون پيڪيج ۾ موجود آهن:
Figure 2: OWON XDS3102 Oscilloscope with its standard accessories, including probes, power cord, USB cable, and software CD.
- OWON XDS3102 Digital Oscilloscope Unit
- پاور ڪنڊ
- سافٽويئر سي ڊي
- USB ڪيبل
- Probe (1x)
- Probe Adjust Tool
Figure 3: Close-up of the included oscilloscope probes and adjustment tool.
4. سيٽ اپ
4.1 پاور ڪنيڪشن
- Ensure the oscilloscope is placed on a stable, level surface with adequate ventilation.
- Connect the provided power cord to the AC power inlet on the rear panel of the oscilloscope.
- Plug the other end of the power cord into a grounded AC power outlet. The device supports 100V-240V, 50/60Hz.
- ڊوائيس کي چالو ڪرڻ لاءِ فرنٽ پينل تي موجود پاور بٽڻ کي دٻايو.
Figure 4: Rear panel of the oscilloscope, highlighting the power input, USB device port, and LAN port.
4.2 پروب ڪنيڪشن
- Connect the BNC connector of the oscilloscope probe to the desired input channel (CH1 or CH2) on the front panel.
- پڪ ڪريو ته ڪنيڪشن محفوظ آهي.
- Attach the probe tip to the circuit point you wish to measure.
شڪل 5: تفصيلي view of the front panel, showing CH1 and CH2 BNC input connectors and associated controls.
5. آپريٽنگ هدايتون
5.1 Basic Oscilloscope Operation
- پاور آن / آف: Use the power button on the lower left of the front panel.
- Autoset: کي دٻايو خودڪار سيٽ button to automatically adjust vertical, horizontal, and trigger settings for a stable waveform display.
- Vertical Controls (CH1/CH2): استعمال ڪريو پوزيشن knob to adjust vertical position and the اسڪيل knob to adjust vertical sensitivity (V/div).
- افقي ڪنٽرول: استعمال ڪريو پوزيشن knob to adjust horizontal position and the اسڪيل knob to adjust time base (s/div).
- ٽرگر ڪنٽرول: Adjust the trigger level using the dedicated knob. Press the مينيو button in the trigger section to access trigger settings.
- ماپ: کي دٻايو ماپ button to display automatic measurements of waveform parameters.
- محفوظ ڪريو: استعمال ڪريو بچايو button to store waveforms or settings.
5.2 Multi-functionality (Datalogger, Multimeter, Waveform Generator)
The XDS3102 can function as a Datalogger, Multimeter, and Waveform Generator. Access these functions via the گهڻائي or فنڪشن buttons on the control panel. Specific instructions for each mode are detailed in the full software manual provided on the included CD.
اختياري افعال: The device supports various optional functions such as VGA+AV output, Wi-Fi connectivity, 1CH 25M waveform generator, DMM digital multimeter, capacitive touch screen, and decoding kits (RS232, SPI, I2C, CAN). These functions require additional modules or software and are not included in the standard package.
6. سار سنڀال
- صفائي: Use a soft, dry cloth to clean the exterior of the oscilloscope. For stubborn dirt, a lightly dampened cloth with mild detergent can be used. Avoid abrasive cleaners or solvents.
- اسٽوريج: When not in use, store the oscilloscope in a clean, dry environment, away from direct sunlight and extreme temperatures.
- تحقيق جي سنڀال: Handle probes carefully. Avoid bending or stressing the cables. Regularly check for damage to the probe tips and connectors.
- اندروني اجزاء: The device contains no user-serviceable components inside. Do not attempt to open the casing. سروسنگ کي قابل اهلڪارن جي حوالي ڪريو.
Figure 6: Close-up of the rear warning label, emphasizing not to open the device and to refer servicing to qualified personnel.
7. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڊوائيس تي طاقت نه آهي. | Power cord not connected; power outlet faulty; internal fuse blown. | Check power cord connection. Test power outlet. If problem persists, contact support. |
| No waveform displayed. | Probe not connected; input signal too small/large; trigger settings incorrect. | Ensure probe is connected to input and circuit. Use خودڪار سيٽ. Adjust vertical scale (V/div) and trigger level. |
| Unstable waveform. | Incorrect trigger settings; noisy signal. | Adjust trigger level and mode. Ensure proper grounding of the circuit and oscilloscope. |
| Display issues (e.g., flickering, no image). | Software glitch; hardware malfunction. | Restart the device. If problem persists, contact support. |
8. وضاحتون
| تفصيل | قدر |
|---|---|
| ٺاهيندڙ | اوون |
| ماڊل نمبر | XDS3102 |
| شيءِ جو وزن | 7.38 پائونڊ |
| پيڪيج جي ماپ | 16.14 x 11.18 x 7.01 انچ |
| مواد | پلاسٽڪ |
| شيون پيڪيج مقدار | 1 |
| بيٽريون شامل آهن | نه |
| بيٽرين جي ضرورت آهي | نه |
| جلدtage حد | 100V - 240V، 50/60Hz |
| وڌ ۾ وڌ پاور | 15W |
| اختياري بيٽري | 4.2V |
9. وارنٽي ۽ سپورٽ
OWON products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official OWON website. For technical support, troubleshooting assistance, or inquiries regarding optional features, please contact OWON customer service or your authorized dealer.
OWON Official Webسائيٽ: www.owon.com.cn
