Apera Instruments Value Series Salt20 Salinity Tester Kit User Manual

تعارف

This manual provides detailed instructions for the proper use and maintenance of your Apera Instruments Salt20 Salinity Tester Kit. The Salt20 is designed for professional salinity measurement in various water solutions, including pools, spas, agriculture, and environmental monitoring.

توهان جي ڊوائيس جي بهترين ڪارڪردگي ۽ ڊگهي عمر لاءِ، مهرباني ڪري آپريشن کان اڳ هن دستور کي چڱي طرح پڙهو.

The Apera Instruments Salt20 Salinity Tester is suitable for a wide range of applications including hydroponics, pools, and drinking water analysis.

حفاظتي احتياط

اهم حفاظتي ڄاڻ

• Always handle the device with care to prevent damage to the sensor.
• Do not immerse the entire meter in water beyond the specified IP67 waterproof rating.
• Keep calibration solutions and the device out of reach of children.
• جڏهن استعمال ۾ نه هجي ته ڊوائيس کي ٿڌي، سڪل جڳهه ۾ ذخيرو ڪريو.
• Ensure the battery compartment is sealed properly to maintain water resistance.

پيداوار ختمview

ڪٽ اجزاء

The Salt20 Salinity Tester Kit includes the meter, calibration solution, AAA batteries, and a lanyard, all housed in a portable carrying case.

The Apera Instruments Salt20 Salinity Tester Kit includes:

• Salt20 Salinity Tester
• 1 bottle of calibration solution (12.88 mS/cm, equivalent to 6.44 ppt)
• AAA batteries (pre-installed or included)
• لانڍي
• پورٽبل کڻڻ وارو ڪيس

اهم خاصيتون

• اعلي درستگي: Apera's unique platinum black sensor (BPB) ensures high accuracy in a wide-range salinity measurement (0 to 10.0 ppt).
• Easy Auto Calibration: 1-point auto calibration with auto buffer recognition.
• خودڪار درجه حرارت معاوضو (ATC): 0-50°C ATC for precise readings.
• صاف LCD ڊسپلي: Large LCD with dual display of salinity (ppt) and temperature (°C/°F), including reminders for stable readings and completed calibrations.
• پنروڪ ڊيزائن: IP67 water-resistant and floatable for durability.
• ڊگھي بيٽري زندگي: Up to 1000 hours of operation powered by AAA batteries.
• خود تشخيص: With out-of-range and low battery warnings.

سينسر ٽيڪنالاجي

The Salt20 features Apera's unique Brush-Resistant Platinum Black (BPB) sensor, designed for high accuracy and consistency in wide-range salinity testing.

LCD ڊسپلي تفصيل

The clear LCD display provides simultaneous readings for salinity (ppt) and temperature, along with indicators for stable readings and successful calibration.

لوازمات

A lanyard is included for convenient and secure use of the Salt20 Salinity Tester.

The complete test kit comes in a rugged carrying case for protection and portability.

سيٽ اپ ڪريو

بيٽري لڳائڻ

The Salt20 Salinity Tester is powered by 4 AAA batteries.

1. Unscrew the battery cap at the top of the meter.
2. Insert the AAA batteries according to the polarity indicators (+/-).
3. Securely screw the battery cap back on to ensure the waterproof seal.

شروعاتي تياري

1. سينسر مان حفاظتي ڪيپ کي هٽايو.
2. Rinse the sensor with distilled water and gently shake off excess water.
3. The meter is now ready for calibration or measurement.

آپريٽنگ هدايتون

بنيادي ماپ

1. هلايو: Short press the MEAS button to turn on the meter.
2. Immerse Sensor: Dip the sensor into the sample solution, ensuring the solution covers the sensor completely. Stir gently to remove air bubbles.
3. ماپ پڙهو: Wait for the smiley face icon to appear and remain stable on the LCD, indicating a stable reading. Record the salinity (ppt) and temperature (°C/°F) values.
4. بند ڪريو: Long press the MEAS button to turn off the meter.

سوئچنگ يونٽ

To switch between °C and °F, with the meter turned off, long press the CAL button until the unit changes.

سرڪاري پراڊڪٽ وڊيو

حساب ڪتاب

1-Point Auto Calibration

The Salt20 Salinity Tester uses a 1-point auto calibration process with auto buffer recognition. It is recommended to calibrate the meter regularly for accurate results, especially before critical measurements or if the meter has not been used for a long time.

The Salt20 Salinity Tester features effortless single-button auto calibration with auto buffer recognition, simplifying the calibration process.

1. حل تيار ڪريو: Pour a small amount of the 12.88 mS/cm (6.44 ppt) calibration solution into a clean beaker.
2. ڪيليبريشن موڊ ۾ داخل ٿيو: With the meter turned on, short press the CAL button. The display will show "CAL" and the calibration value.
3. Immerse Sensor: Dip the sensor into the calibration solution. Stir gently.
4. Wait for Stability: The meter will automatically recognize the calibration solution. Wait for the smiley face icon to appear and remain stable. The calibration success symbol (M) will also appear.
5. Exit Calibration: Short press the MEAS button to exit calibration mode and return to measurement mode.

نوٽ: Always use fresh calibration solution for each calibration. Do not pour used solution back into the bottle.

سار سنڀال

سينسر جي صفائي

The BPB (Brush-Resistant Platinum Black) sensor is robust but requires proper cleaning to maintain accuracy.

1. After each use, rinse the sensor thoroughly with distilled or deionized water.
2. If there is visible contamination, gently brush the sensor with a soft brush (like a soft toothbrush) while rinsing.
3. For stubborn deposits, soak the sensor in a mild detergent solution for 10-15 minutes, then rinse thoroughly.
4. ڪڏهن به نه wipe the sensor with abrasive materials or apply excessive force, as this can damage the platinum black coating.

ذخيرو

For long-term storage, ensure the sensor is clean and dry. Replace the protective cap. Store the meter in its carrying case in a cool, dry place.

مشڪلاتون

عام مسئلا ۽ حل

وضاحتون

ٽيڪنيڪل وضاحتون

وارنٽي ۽ سپورٽ

وارنٽي ڄاڻ

Apera Instruments provides a limited warranty for its products. Please refer to the official Apera Instruments website or the warranty card included with your product for specific warranty terms and conditions.

ڪسٽمر سپورٽ

For technical assistance, troubleshooting, or inquiries about replacement parts and accessories, please contact Apera Instruments customer support.

Webسائيٽ: www.aperainst.com

اي ميل: Refer to your product documentation for specific contact email.

فون: Refer to your product documentation for specific contact phone number.