Levenhuk 720B بائنڪولر مائڪرو اسڪوپ يوزر مينوئل

1. تعارف

This manual provides instructions for the proper setup, operation, and maintenance of your Levenhuk 720B Binocular Microscope. Please read these instructions carefully before using the instrument to ensure correct usage and to prolong its lifespan. This microscope is designed for laboratory, clinical, and medical research applications.

2. پراڊڪٽ ختمview

The Levenhuk 720B is a binocular compound microscope featuring multiple objective lenses and eyepieces for various magnification levels. It includes a mechanical stage, LED illumination, and coarse/fine focusing mechanisms.

شڪل 2.1: سامهون view of the Levenhuk 720B Binocular Microscope, showing the binocular head, objective lenses, mechanical stage, and base.

Figure 2.2: Included accessories: WF10x/18mm eyepieces (2), WF20x eyepieces (2), color filters (blue, yellow, green), immersion oil, cleaning cloth, hex key, and spare fuse.

3. سيٽ اپ

1. پيڪنگ کولڻ: پيڪنگ مان سڀني حصن کي احتياط سان هٽايو. مستقبل جي ٽرانسپورٽ يا اسٽوريج لاءِ اصل پيڪنگ کي برقرار رکو.
2. لڳائڻ: Place the microscope on a stable, level surface away from direct sunlight, high temperatures, dust, and vibrations.
3. پاور ڪنيڪشن: Connect the power cord to the microscope's power input (AC100V-240V, 50/60Hz) located at the rear of the base, then plug it into a suitable electrical outlet. Ensure the power switch is in the OFF position before connecting.


شڪل 3.1: پوئتي view of the microscope showing the power input and switch.

4. آئي پيس جي انسٽاليشن: Insert the desired eyepieces (e.g., WF10x) into the eyepiece tubes of the binocular head.
5. Binocular Head Adjustment: If the binocular head is rotatable, adjust it to a comfortable viewپوزيشن.

4. آپريٽنگ هدايتون

1. پاور آن: Flip the power switch located on the rear of the microscope base to the ON position. Adjust the illumination intensity using the dimmer control.
2. نموني جي جڳھ: Place a prepared microscope slide onto the mechanical stage. Secure it with the stage clips. Use the stage control knobs to center the specimen area of interest over the condenser aperture.


شڪل 4.1: بند اپ view جي مشيني ايسtage with the condenser and iris diaphragm visible below.

3. Magnification Selection: Rotate the revolving nosepiece to select the lowest power objective lens (e.g., 4x). Ensure the objective clicks firmly into place.
4. ڌيان ڏيڻ:
   • While looking through the eyepieces, use the coarse focus knob to bring the specimen into approximate focus.
   • پوء، استعمال ڪريو fine focus knob for precise focusing until the image is sharp and clear.
5. روشني جي ترتيب:
   • ڊمر ڪنٽرول استعمال ڪندي روشني کي ترتيب ڏيو.
   • Adjust the iris diaphragm lever on the condenser to control the amount of light reaching the specimen and improve contrast.


شڪل 4.2: View of the illuminated condenser and objective lens from below the stage.

6. انٽرپيپلري فاصلي جي ترتيب: Adjust the distance between the two eyepiece tubes by gently pushing them together or pulling them apart until you see a single, circular field of view.
7. Diopter ترتيب: If one eyepiece has a diopter adjustment ring, focus on the specimen with your dominant eye (usually the right eye) using only the fine focus knob. Then, close your dominant eye and use the diopter adjustment ring on the other eyepiece to focus for your non-dominant eye without touching the fine focus knob.
8. Higher Magnification: Once focused at low power, rotate the nosepiece to a higher power objective. Only minor adjustments with the fine focus knob should be needed due to the parfocal design.
9. Immersion Oil (for 100x objective): For the 100x objective lens, a drop of immersion oil must be placed directly on the specimen slide. Lower the objective into the oil carefully. After use, clean the 100x objective and slide thoroughly with lens cleaning solution.

5. سار سنڀال

• لينس جي صفائي: Use a soft, lint-free lens cleaning cloth and a specialized lens cleaning solution. Never touch optical surfaces with your fingers.
• عام صفائي: خوردبيني جسم کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. گھڻائي صاف ڪندڙ يا محلول استعمال ڪرڻ کان پاسو ڪريو.
• اسٽوريج: When not in use, cover the microscope with a dust cover to protect it from dust and debris. Store in a dry, cool place.
• فيوز مٽائڻ: If the illumination fails, check the fuse located near the power input. Replace it with a fuse of the same type and rating (a spare fuse is included).

6. مسئلا حل ڪرڻ

7. وضاحتون

• ماڊل نمبر: 69656
• برانڊ: ليونڪ
• وڌ ۾ وڌ واڌارو: 2000x
• روشني جو قسم: ايل اي ڊي
• مقصد لينس وضاحت: اکروميٽڪ
• حقيقي زاويه جو View: 45 درجا
• طاقت جو ذريعو: تار ٿيل برقي
• جلدtage: 110 وولٽ
• پيداوار جي ماپ: 19.29 x 15.75 x 10.63 انچ
• شيء جو وزن: 12.36 پائونڊ (5.62 ڪلوگرام)
• UPC: 611901504766

8. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Levenhuk webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.