EchoMaster Universal Backup Camera (Model Cam-LP1-N)

1. تعارف

The EchoMaster Universal Backup Camera (Model Cam-LP1-N) is designed to provide enhanced visibility for your vehicle, assisting with parking and maneuvering. This camera can be installed for either front or rear views, offering a 170-degree wide viewing angle and night vision capabilities. Its IP68 waterproof rating ensures durability in various weather conditions. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

تصوير 1.1: EchoMaster Universal Backup Camera with License Plate Mount. This image displays the compact camera module attached to a standard license plate bracket, ready for vehicle installation.

2. پيڪيج مواد

مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون توھان جي پيڪيج ۾ موجود آھن:

• Backup Camera Module
• لائسنس جي پليٽ واري بريڪٽ
• Optional Lip Mount Bracket
• ماؤنٽنگ هارڊويئر (اسڪرو، نٽ، واشر)
• ھدايت وارو دستور
• Video Cable (RCA type)
• پاور ڪيبل

3. مصنوعات جون خاصيتون

• يونيورسل مطابقت: Designed for use with various vehicles including cars, trucks, RVs, and mini-vans.
• ورسٽائل چڙهڻ: Includes both a license plate bracket and an optional lip mount bracket for flexible installation.
• ويڪرو Viewزاويه: Features a 170-degree lens for comprehensive coverage behind or in front of the vehicle.
• رات جو خواب: Equipped with low-light capabilities for clear visibility in dark conditions.
• IP68 پنروڪ درجه بندي: Ensures reliable operation in adverse weather conditions, protecting against dust and water immersion.
• Selectable Image Orientation: Allows for mirror image (rear view) or normal image (front view) display.
• Optional Parking Lines: Integrated parking guidelines can be activated or deactivated.

تصوير 3.1: Close-up of the Camera Module. This image highlights the compact design and lens of the EchoMaster camera, demonstrating its discreet profile.

4. حفاظت جي ڄاڻ

• ڪنهن به بجلي جي انسٽاليشن شروع ڪرڻ کان اڳ هميشه گاڏي جي بيٽري کي ڊسڪنيڪٽ ڪريو.
• پڪ ڪريو ته سڀئي وائرنگ صحيح طرح سان موصل ۽ محفوظ آهن ته جيئن شارٽ سرڪٽ يا نقصان کان بچي سگهجي.
• Route cables away from hot surfaces, moving parts, and sharp edges.
• ڊرائيور جي گاڏي کي نه روڪيو view يا انسٽاليشن دوران گاڏين جي ڪنٽرول ۾ مداخلت ڪريو.
• This camera is an aid for safe driving and parking; it does not replace the driver's responsibility to check surroundings.
• جيڪڏهن توهان کي انسٽاليشن جي عمل جي ڪنهن به حصي بابت پڪ ناهي، ته ڪنهن قابل پيشه ور سان صلاح ڪريو.

5. انسٽاليشن گائيڊ

The EchoMaster Universal Backup Camera offers two primary mounting options: license plate mount and lip mount. Choose the option best suited for your vehicle.

5.1. چڙهڻ جي جڳھ چونڊڻ

• ريڙهه View: Typically mounted above the license plate or on the bumper. This provides a clear view of obstacles and parking lines when reversing.
• سامهون View: Can be mounted on the front bumper or grille. Useful for parking in tight spaces or navigating obstacles directly in front of the vehicle.

5.2. License Plate Mount Installation

1. Remove your vehicle's rear license plate.
2. Attach the camera module to the provided license plate bracket using the small screws and nuts. Ensure the camera lens faces outwards and downwards slightly for optimal viewزاويه.
3. Position the assembled camera and bracket behind your license plate, aligning the mounting holes.
4. Secure the license plate and camera bracket to the vehicle using your original license plate screws. Ensure the camera is stable and does not obstruct the license plate characters.
5. Carefully route the camera's video and power cables through a discreet opening into the vehicle's interior. This may require drilling a small hole if no existing access point is available. Seal any drilled holes with silicone sealant to prevent water entry.

تصوير 5.1: License Plate Bracket. This image shows the metal bracket designed to integrate the camera discreetly with your vehicle's license plate.

5.3. Lip Mount Installation (Optional)

1. Identify a suitable flat surface on your vehicle's bumper or trunk lip where the camera can be mounted.
2. Attach the camera module to the optional lip mount bracket.
3. Mark the drilling points for the lip mount bracket and the cable pass-through hole.
4. Drill the necessary holes. Ensure the holes are appropriately sized for the mounting screws and cable.
5. Secure the lip mount bracket with the camera to the vehicle using the provided mounting hardware.
6. Route the camera's video and power cables through the drilled hole into the vehicle's interior. Seal the hole with silicone sealant.

تصوير 5.2: Camera with Lip Mount Bracket. This side view illustrates the camera attached to the lip mount bracket, suitable for mounting on a flat surface.

5.4. وائرنگ ڪنيڪشن

Refer to the wiring diagram below for proper electrical connections. It is recommended to have this step performed by a professional if you are not familiar with automotive electrical systems.

• Power Connection (Red Wire): Connect the red power wire from the camera to a 12V switched power source. For rear view cameras, this is typically the vehicle's reverse light circuit, so the camera activates when reverse gear is engaged. For front view cameras, connect to an ignition-switched 12V source or a dedicated switch.
• Ground Connection (Black Wire): Connect the black ground wire to a clean, unpainted metal surface on the vehicle chassis.
• Video Connection (RCA Yellow Connector): Connect the yellow RCA video cable from the camera to the video input of your display monitor or head unit.
• Mirror Image / Parking Line Control: The camera features small loops (often green for parking lines, white for mirror image) near the camera end of the cable.
• To deactivate parking lines, cut the green loop.
• To switch between mirror image (default for rear view) and normal image (for front view), cut the white loop (if present, otherwise consult specific product documentation).

6. وائرنگ ڊاگرام

تصوير 6.1: Wiring Diagram and Pin Out. This diagram illustrates the connections for the camera's power (red +12V, black GND) and video (yellow RCA), along with the green loop for parking line deactivation and the mirror image switch.

7. آپريشن

Once properly installed and wired, the EchoMaster Universal Backup Camera operates automatically based on its power connection.

• ريڙهه View ڪئميرا: When connected to the reverse light circuit, the camera will automatically power on and display the rear view on your monitor when the vehicle is shifted into reverse gear.
• سامهون View ڪئميرا: If wired to an ignition-switched power source or a dedicated switch, the camera will activate when the ignition is on or the switch is engaged, displaying the front view.
• تصوير ڏيکاريو: The camera provides a clear, wide-angle view. If parking lines are enabled, they will appear on the screen to assist with judging distance.
• رات جو خواب: The camera automatically adjusts to low-light conditions, providing enhanced visibility in the dark.

8. سار سنڀال

• لينس جي صفائي: وقتي طور تي ڪئميرا لينس کي نرم، ڊي سان صاف ڪريوamp مٽي، مٽي، يا پاڻي جي داغن کي هٽائڻ لاءِ ڪپڙو جيڪو رڪاوٽ بڻجي سگهي ٿو view. ڇڪڻ واري صاف ڪندڙن کان پاسو ڪريو.
• ڪيبل جي چڪاس: Regularly inspect all cables and connections for signs of wear, fraying, or corrosion. Ensure all connections remain secure.
• حفاظتي حفاظت: Check the camera's mounting bracket periodically to ensure it remains firmly attached to the vehicle. Tighten any loose screws if necessary.
• هاءِ پريشر واشنگ کان پاسو ڪريو: While the camera is IP68 rated, direct high-pressure water jets from car washes can potentially damage seals over time. Exercise caution.

9. مسئلا حل ڪرڻ

10. وضاحتون

11. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official EchoMaster webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

You can visit the EchoMaster store for more products and support information: EchoMaster Store