LogiLink W12A40G 12U Wall-Mounted Network Rack

1. تعارف

This manual provides comprehensive instructions for the safe and efficient assembly, installation, and operation of your LogiLink W12A40G 12U Wall-Mounted Network Rack. Please read all instructions carefully before beginning installation and retain this manual for future reference.

2. حفاظتي هدايتون

• Always ensure the mounting surface is structurally sound and capable of supporting the rack's weight plus the weight of all installed equipment.
• Use appropriate wall anchors and fasteners for your specific wall type. Consult a professional if unsure.
• Assembly requires at least two people for safe handling and installation.
• Wear appropriate personal protective equipment (PPE) such as gloves and eye protection during assembly.
• 50 kg (110 lbs) جي وڌ ۾ وڌ لوڊ گنجائش کان وڌيڪ نه ڪريو.
• Ensure proper ventilation to prevent overheating of installed equipment.
• انسٽاليشن دوران ٻارن ۽ پالتو جانورن کي ڪم واري علائقي کان پري رکو.

3. پيڪيج مواد

اسيمبلي سان اڳتي وڌڻ کان اڳ پڪ ڪريو ته هيٺ ڏنل سڀئي جزا موجود آهن ۽ انهن کي نقصان نه پهتو آهي.

• LogiLink W12A40G 12U Rack Frame (unassembled)
• Front Door with Lock and Key
• پاسي وارا پينل (2)
• Adjustable 19-inch Mounting Rails (2 pairs)
• اسيمبلي هارڊويئر (اسڪرو، نٽ، واشر)
• Wall Mounting Hardware (anchors, washers, nuts)

Figure 3.1: Included mounting hardware and keys.

4. مصنوعات جون خاصيتون

• Robust Steel Casing: Constructed from durable steel for enhanced protection of your equipment.
• لوڊ گنجائش: Supports up to 50 kg (110 lbs) of equipment.
• Interchangeable Door Hinge: The front door hinge can be reversed to open from either the left or right side.
• هٽائڻ وارا سائڊ پينل: Side panels can be easily removed for convenient access to equipment during installation and maintenance.
• Lockable Security Glass Door: Features a lockable tempered glass front door with a 180° opening angle for security and visibility.
• Adjustable 19-inch Profile ريل: Depth-adjustable 483 mm (19-inch) mounting rails to accommodate various equipment sizes.
• Cable Entry Points: Multiple cable entry points located in the rear wall, top, and bottom of the rack for flexible cable management.

شڪل 4.1: سامهون view of the rack with the door open, highlighting interior access.

Figure 4.2: Top interior view showing ventilation and cable entry.

Figure 4.3: Bottom interior view showing cable entry points.

5. سيٽ اپ ۽ تنصيب

Follow these steps for proper assembly and wall mounting of your network rack.

5.1. Assembly of the Rack Frame

1. سڀني حصن کي کوليو ۽ پيڪيج جي مواد جي فهرست جي خلاف تصديق ڪريو.
2. Assemble the main frame components (top, bottom, and side supports) using the provided screws and nuts. Ensure all connections are secure.
3. Install the adjustable 19-inch mounting rails. These rails can be positioned at various depths within the rack. Secure them with the appropriate hardware.
4. Attach the front door to the desired side using the hinge mechanism. Ensure the door opens and closes smoothly and the lock functions correctly.
5. Slide the side panels into place and secure them.

5.2. ڀت چڙهڻ

1. جڳھ چونڊيو: Choose a suitable wall location that is structurally sound and free from obstructions (e.g., electrical wiring, plumbing). Consider proximity to power outlets and network connections.
2. مارڪ ڊرلنگ پوائنٽس: Hold the assembled rack against the wall at the desired mounting height. Use a pencil to mark the four mounting holes on the back panel onto the wall. Ensure the marks are level.
3. سوراخ سوراخ: Using an appropriate drill bit for your wall type and the provided wall anchors, drill holes at the marked locations.
4. لنگر داخل ڪريو: ڀت جي لنگر کي سوراخ ٿيل سوراخن ۾ داخل ڪريو.
5. جبل ريڪ: With assistance, carefully lift the rack and align the mounting holes on its back panel with the installed wall anchors. Insert the provided screws with washers through the rack's mounting holes and into the anchors.
6. Secure Rack: Tighten all screws firmly to secure the rack to the wall. Do not overtighten.

شڪل 5.1: پوئتي view of the rack, indicating wall mounting points and cable entry.

Figure 5.2: Fully assembled and mounted rack.

6. آپريشن

Once installed, the LogiLink W12A40G rack provides a secure enclosure for your network equipment.

• سامان لڳائڻ: Mount 19-inch compatible equipment onto the adjustable rails using appropriate rack screws (not included). Ensure equipment is evenly distributed to maintain balance.
• ڪيبل جو انتظام: Utilize the various cable entry points and internal space for organized cable routing. Consider using cable ties or management panels (sold separately) to keep cables tidy and prevent obstruction of airflow.
• سيڪيورٽي: Keep the front door locked to prevent unauthorized access to your network equipment.
• وينٽيليشن: Ensure adequate airflow around and within the rack. The top panel includes cutouts for optional fan installation (fans not included) to enhance cooling.

7. سار سنڀال

• باقاعده صفائي: Periodically clean the exterior of the rack with a soft, damp ڪپڙو. گھڻائي صاف ڪرڻ وارن کان پاسو ڪريو.
• مٽي هٽائڻ: Open the rack and gently remove any accumulated dust from inside the enclosure and equipment using compressed air or a soft brush. This helps maintain optimal airflow and equipment performance.
• هارڊويئر چيڪ: Periodically inspect all mounting hardware and assembly screws to ensure they remain tight and secure. Retighten if necessary.
• دروازو ۽ تالا: Check the door hinges and lock mechanism for smooth operation. Lubricate if needed.

8. مسئلا حل ڪرڻ

• اسيمبلي دوران ڏکيائي: If screw holes do not align perfectly, slightly loosen adjacent screws to allow for minor adjustments. Ensure all parts are correctly oriented according to the assembly diagrams. Do not force components.
• Rack Not Level: If the rack appears uneven after mounting, check the wall anchors and adjust as needed. Ensure your initial drilling points were level.
• Door Not Closing/Locking: Check for any obstructions. Ensure the door hinges are properly aligned and tightened. The hinge can be adjusted or reversed if needed.
• Overheating Equipment: Verify that the rack is not overloaded. Ensure proper cable management to avoid blocking airflow. Consider installing optional ventilation fans in the top panel.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

LogiLink products are designed for reliability and performance. For warranty information, technical support, or to inquire about replacement parts, please refer to the official LogiLink webسائيٽ تي وڃو يا پنهنجي مقامي ورهائيندڙ سان رابطو ڪريو. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.