1. تعارف
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your MONZANA® Pressure Switch Water Pump. Please read this manual thoroughly before use and keep it for future reference.
The MONZANA® pressure monitor ensures constant water pressure for garden irrigation or domestic water supply. The line pressure in the connected system is monitored by the pressure switch. The water pump is automatically started and stopped depending on the opening and closing of the consumer.
2. حفاظت جي ڄاڻ
Attention! Observe instructions. Warning of general danger. Choking hazard. Keep small parts and packaging away from children.
Always disconnect the power supply before performing any installation, maintenance, or troubleshooting. Ensure all electrical connections are made by qualified personnel, especially for models without pre-installed cables.
Do not operate the device if it is damaged or if the cables are frayed. Protect the device from frost and extreme temperatures.
3. پراڊڪٽ ختمview
The MONZANA® Pressure Switch is designed to regulate water pressure in pumping systems, providing reliable and consistent water flow.
شڪل 3.1: ختمview of the MONZANA Pressure Switch Water Pump with pre-installed cable.
شڪل 3.2: بند اپ view of the control panel indicating power, pump status, fault, and restart button.
شڪل 3.3: زاويه view showing the pressure switch with its electrical cables connected.
4. ٽيڪنيڪل وضاحتون
| خاصيت | تفصيل |
|---|---|
| طول و عرض (L x W x H) | 23.5 x 17 x 17 سينٽي |
| دٻاء شروع ڪريو | 1.5 بار |
| وڌ. دٻاءُ | 10 بار |
| جلدtage | 220-240V |
| موجوده درجه بندي | 10A |
| وڌ. طاقت | 1.1 kW (1100W) |
| وڌ. آپريٽنگ جي درجه حرارت | 60 °C |
| وزن | 1.7 ڪلو |
| وهڪري جي شرح | 60 - 160 L/min |
| IP تحفظ ڪلاس | IP54 |
| ڪنيڪشن ٿريڊ | 1" External Thread |
| هائوسنگ مواد | پوليوپروپيلين (پي پي) |
Figure 4.1: Length dimension of the pressure switch (235mm).
Figure 4.2: Height dimension of the pressure switch (170mm).
5. تنصيب ۽ سيٽ اپ
The MONZANA pressure monitor can be quickly and easily mounted via the connection thread. It is important that the device is installed vertically in the direction of flow.
- چڙهڻ جي پوزيشن: Install the pressure switch vertically in the direction of water flow. Ensure the arrow on the device aligns with the flow direction.
- پاڻي ڪنيڪشن: Connect the 1" external thread to your water pump's outlet and the system's inlet. Use appropriate sealing tape (e.g., PTFE tape) to ensure watertight connections.
- برقي ڪنيڪشن:
- ماڊلز لاء سان cable: Connect the plug to a suitable 220-240V power outlet.
- ماڊلز لاء بغير cable: The connection of the power supply should be carried out exclusively by trained specialist personnel. Ensure correct wiring according to local electrical codes.
- سسٽم کي پرائم ڪرڻ: Before starting, ensure the pump and the pressure switch are fully primed with water to prevent dry running.
- شروعاتي شروعات: Once all connections are secure and the system is primed, connect the power. The pump should start automatically when a consumer is opened and stop when it is closed.
6. آپريشن
The pressure switch automatically controls the pump based on water demand. When a tap or valve is opened, the pressure drops, and the switch activates the pump. When the tap or valve is closed, the pressure rises, and the switch deactivates the pump.
- Power Indicator (Strom AN): A green light indicates that the device is receiving power.
- Pump Indicator (Pumpe AN): A green light indicates that the pump is currently running.
- Fault Indicator (Störung): A red light indicates a fault, often due to dry running.
- Restart Button (Neustart): Press this button to reset the device after a fault, such as dry running protection activation.
The pressure monitor is equipped with a check valve to protect the piping system from pressure loss. This protects your pump from damage even in the event of insufficient flow and ensures a longer service life.
7. سار سنڀال
The device requires no special maintenance. However, regular checks are recommended to ensure optimal performance and longevity.
- باقاعده چڪاس: Periodically check all connections for leaks and ensure the cables are intact and free from damage.
- صفائي: Keep the exterior of the device clean. Do not use abrasive cleaners or solvents.
- ٿڌ کان بچاءُ: In areas prone to freezing temperatures, ensure the device and connected pipes are drained or protected from frost during winter months to prevent damage.
8. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| پمپ شروع نٿو ٿئي. | No power supply; Fault indicator lit; Dry run protection activated. | Check power connection; Press the نيوسٽارٽ (Restart) button; Ensure pump is primed with water. |
| پمپ مسلسل هلندو آهي. | Leak in the system; Check valve malfunction; Pressure sensor issue. | Check all pipes and connections for leaks; Inspect or replace check valve; Contact qualified personnel. |
| Pump cycles on/off frequently. | Small leak; Insufficient water supply; Air in the system. | Check for minor leaks; Ensure adequate water source; Bleed air from the system. |
| گھٽ پاڻي جو دٻاء. | Pump not delivering enough flow; Clogged filter; Incorrect installation. | Check pump performance; Clean any filters in the system; Verify vertical installation and flow direction. |
9. نيڪال
Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
