تعارف
The ZeroWater 7-Cup 5-Stage Water Filtration Pitcher is designed to provide purified water by removing virtually all Total Dissolved Solids (TDS). This compact pitcher is suitable for various kitchen and refrigerator sizes, featuring Ready-Pour™ technology for convenience. It is IAPMO certified to reduce lead, PFOA/PFOS, chromium, and mercury.
اهم خاصيتون:
- انٽيگريٽيڊ ٽي ڊي ايس ميٽر: Allows for checking dissolved solids levels to determine filter replacement time.
- ترقي يافته 5-Stage Ion Exchange Filtration: Removes virtually all dissolved solids for enhanced water taste.
- IAPMO Certified and BPA-Free: Certified to reduce PFOA/PFOS, lead, chromium, and mercury. All components are made from BPA-Free plastic.
- Ready-Pour™ Technology: Enables pouring filtered water while the reservoir is still filtering.
- Environmental Benefit: Reduces the need for single-use plastic bottles.
Image: The ZeroWater 7-Cup 5-Stage Water Filter Pitcher, showcasing its compact design and clear reservoir.
سيٽ اپ جون هدايتون
- انپيڪ اجزاء: Carefully remove all parts from the packaging: the pitcher, lid, water reservoir, 5-stage filter, and TDS meter.
- ڌوئڻ اجزاء: Wash the pitcher, lid, and water reservoir with mild soap and warm water. Rinse thoroughly. Do not wash the filter or TDS meter with soap.
- فلٽر تيار ڪريو: Remove the filter from its protective packaging. The filter may be damp inside the blue cap; this is normal as filters are pre-primed.
- فلٽر انسٽال ڪريو Screw the 5-stage filter firmly into the threaded opening on the underside of the water reservoir. Ensure it is securely tightened to prevent leaks and ensure proper filtration.
- Assemble the Pitcher: Place the assembled reservoir (with filter) into the pitcher. Position the lid securely on top of the pitcher.
- شروعاتي ڀرڻ: Fill the top reservoir with cold tap water. Allow the water to filter through completely into the main pitcher. Discard the first two full pitchers of filtered water to flush out any loose filter media.
- Test with TDS Meter: After discarding the initial water, use the included TDS meter to test the filtered water. The goal is a reading of 000. If the reading is not 000, ensure the filter is securely installed and repeat the initial fill and test.
Image: A cross-section diagram illustrating the 5-stage filtration process of the ZeroWater filter, detailing how it removes fine particles, suspended solids, organic contaminants, inorganic compounds, and ultrafine particles.
آپريٽنگ هدايتون
- گھڙو ڀرڻ: Remove the lid and pour cold tap water into the top reservoir. Do not overfill past the maximum fill line.
- فلٽريشن جو عمل: Water will slowly filter through the 5-stage filter into the main pitcher. The Ready-Pour™ technology allows you to dispense water from the pitcher even while the top reservoir is still filtering.
- پاڻي پهچائڻ: Lift the pitcher and pour water from the spout as needed.
- ٽي ڊي ايس ميٽر استعمال ڪندي:
- ٽي ڊي ايس ميٽر کي آن ڪرڻ لاءِ "آن/آف" بٽڻ دٻايو.
- Dip the metal probes of the meter into the filtered water.
- Read the digital display. A reading of 000 indicates optimal filtration.
- Press "ON/OFF" again to turn off the meter. Rinse the probes with clean water after each use.
Image: A hand pouring clear, filtered water from the ZeroWater pitcher into a drinking glass, demonstrating the ease of use.
سار سنڀال
فلٽر متبادل:
5-stage filter needs to be replaced when the TDS meter reads 006 يا وڌيڪ. Using the filter beyond this point may compromise water quality. The frequency of filter replacement depends on your tap water's initial TDS level and your water consumption.
- Empty any remaining water from the pitcher.
- رزروائر جي تري مان پراڻي فلٽر کي کوليو.
- پراڻي فلٽر کي ذميواري سان ختم ڪريو.
- Install a new ZeroWater 5-stage replacement filter by screwing it firmly into the reservoir.
- Follow the "Initial Fill" and "Test with TDS Meter" steps from the Setup Instructions for the new filter.
Image: A TDS meter submerged in a glass of water, displaying a reading of "006", indicating the recommended point for filter replacement.
پچر جي صفائي:
Regularly clean the pitcher, lid, and reservoir with mild dish soap and warm water. Rinse thoroughly to remove all soap residue. Do not use abrasive cleaners or put the filter in the dishwasher.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Slow Filtration Rate | Filter is nearing the end of its life or is clogged with sediment. | Check TDS reading. If 006 or higher, replace the filter. If water is very hard or has high sediment, filters may clog faster. |
| پاڻي جو ذائقو غير معمولي آهي | Filter needs replacement; contaminants are passing through. | Test water with TDS meter. If reading is 006 or higher, replace the filter. Ensure initial flushing was performed. |
| TDS Reading Not 000 | Filter not properly installed, or filter needs replacement. | Ensure the filter is screwed in tightly to the reservoir. If still not 000, and the filter is old, replace it. |
| Water Leaking Around Filter | Filter not screwed in tightly, or rubber gasket is not seated correctly. | Unscrew and re-screw the filter, ensuring it is very tight. Check the rubber gasket for proper seating and any damage. |
وضاحتون
- ماڊل نمبر: ZP-007RP
- گنجائش: 7 پيالو
- فلٽريشن Stages: 5-ايسtage Ion Exchange
- سرٽيفڪيشن: IAPMO Certified to NSF/ANSI Standards 42 and 53 for reduction of Lead, Chromium, PFOA/PFOS, and Mercury. BPA-Free.
- پيداوار جي ماپ: 10.5"ليٽر x 9.5"ڊبليو x 4.9"ايڇ
- شيء جو وزن: تقريبن 2.2 پائونڊ
- شامل لوازمات: 5-ايسtage Filter, TDS Meter
Image: Certification details for the ZeroWater filter, highlighting IAPMO certification to Standards 42 and 53 for reduction of lead, chromium, PFOA/PFOS, and mercury.
وارنٽي ۽ سپورٽ
For detailed warranty information, product registration, or customer support, please visit the official ZeroWater webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.
ZeroWater Official Webسائيٽ: www.zerowater.com
