تعارف
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.
پيڪيج مواد
شروع ڪرڻ کان اڳ، مھرباني ڪري پڪ ڪريو ته ھيٺ ڏنل سڀ شيون توھان جي پيڪيج ۾ موجود آھن:
- Ortofon OM10 Phono Cartridge
- 15 V DC Universal Power Supply
- Hinged Acrylic Dust Cover
- Connect It E Audio Cable
- 7" 45 RPM Adaptor
Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.
سيٽ اپ ڪريو
Follow these steps to set up your turntable for optimal performance:
- پيڪنگ کولڻ: پيڪنگ مان سڀني حصن کي احتياط سان هٽايو. مستقبل جي ٽرانسپورٽ يا اسٽوريج لاءِ پيڪنگ کي برقرار رکو.
- لڳائڻ: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
- پليٽ جي انسٽاليشن: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
- بيلٽ لڳائڻ: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
- Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
- Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
- اينٽي اسڪيٽنگ ايڊجسٽمينٽ: Attach the anti-skating weight to the designated groove on the tonearm support.
- مٽي ڍڪڻ: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
- ڪنيڪشن: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preampنجات ڏيندڙ يا amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.
Image: Detail of the motor pulley and belt drive system.
Image: The tonearm and pre-mounted Ortofon OM10 cartridge.
آپريٽنگ هدايتون
To play a record:
- پاور آن: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
- رفتار چونڊيو: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
- جڳھ جو رڪارڊ: احتياط سان پنهنجو وينائل رڪارڊ پليٽر تي رکو.
- لفٽ ٽوني آرم: ٽونارم کڻڻ لاءِ ٽونر لفٽ ليور استعمال ڪريو.
- Position Stylus: رڪارڊ جي گهربل شروعاتي نالي تي ٽوني آرم کي نرميءَ سان هلايو.
- هيٺيون ٽوني بازو: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
- End of Playback: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.
Image: Power switch location on the turntable plinth.
سار سنڀال
Regular maintenance ensures the longevity and optimal performance of your turntable:
- مٽي ڍڪڻ: Always use the dust cover when the turntable is not in use to protect it from dust and debris.
- Cleaning the Plinth: Wipe the plinth with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- اسٽائلس جي صفائي: Use a dedicated stylus brush or cleaning fluid to gently clean the stylus before or after each play. Brush from back to front.
- Cleaning Records: Keep your records clean using a record brush or a record cleaning machine to prevent dust from accumulating on the stylus.
- بيلٽ جي چڪاس: Periodically inspect the drive belt for wear or stretching. Replace if necessary.
مشڪلاتون
جيڪڏهن توهان کي پنهنجي ٽرن ٽيبل سان مسئلا درپيش اچن ٿا، ته هيٺ ڏنل عام مسئلن ۽ حلن جو حوالو ڏيو:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| No power / Turntable not spinning | بجلي ڪيبل ڪٽيل آهي؛ بجلي جو آئوٽليٽ خراب آهي؛ بجلي جو سوئچ بند آهي. | Check power connections; Try a different outlet; Ensure power switch is 'On'. |
| ڪو به آواز نه يا تمام گهٽ آواز | غلط ان پٽ چونڊيو ويو آهي amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preampوierيڪ زنده | Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one. |
| بگڙيل آواز / ڇڏڻ | Stylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged. | Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record. |
| گونجندڙ شور | Ground wire not connected; Interference from other electronics. | Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics. |
| Speed inconsistency | Drive belt worn or improperly seated; Motor issue. | Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support. |
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نالو | Essential III Sgt. Pepper |
| برانڊ | پرو-جيڪٽ |
| طول و عرض (L x W x H) | 12.99 x 16.54 x 4.41 انچ |
| شيءِ جو وزن | 11 پائونڊ (تقريبن 5 ڪلوگرام) |
| رابطي ٽيڪنالاجي | آر سي اي |
| مواد | Engineered Wood, Plastic |
| ڊرائيو سسٽم | بيلٽ ڊرائيو هم وقت ساز موٽر ۽ سلڪون بيلٽ سان |
| پليٽر | Acrylic (Acryl it E upgrade) |
| ٽونيرم | 8.6" Aluminium Tonearm |
| ڪاريگري | Pre-mounted Ortofon OM10 |
| آن موڊ پاور واپرائڻ | 4.5 واٽ |
وارنٽي ۽ سپورٽ
For warranty information and technical support, please refer to the official Pro-Ject Audio Systems webسائيٽ تي وڃو يا پنهنجي مجاز ڊيلر سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
ٺاهيندڙ: پرو جيڪ آڊيو سسٽم
پهريون دستياب: مئي 31، 2017
واپسي جي پاليسي: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).
وڌيڪ مدد لاء، دورو ڪريو جي Amazon تي Pro-Ject اسٽور.
