TOZO Q1012 X8tw ڊرون آر سي ڪواڊ ڪاپٽر استعمال ڪندڙ دستياب

1. تعارف

This manual provides detailed instructions for the safe operation and maintenance of your TOZO Q1012 X8tw RC Quadcopter. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.

Image: The TOZO Q1012 X8tw drone, black in color, with its four propellers extended, viewed from above. The drone features a sleek design with a white stripe down the center.

2. پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

تصوير: هڪ اوورview of the TOZO Q1012 X8tw drone's package contents, including the drone, remote transmitter, screws, battery, USB charging cable, spare propellers, screwdriver, phone holder, and the operation manual.

• TOZO Q1012 X8tw RC Quadcopter
• ريموٽ ٽرانسميٽر
• ريچارج لائق ڊرون بيٽري
• USB چارجنگ ڪيبل
• اضافي پروپيلرز (4 جو سيٽ)
• اسڪوائر
• Phone Holder for Transmitter
• ھدايت وارو دستور
• Screws (for propeller attachment)

3. مصنوعات جون خاصيتون

• فولبل ڊيزائن: The drone arms can be folded for compact storage and portability.

  Image: Demonstrates the foldable design of the TOZO Q1012 X8tw drone, showing both its compact folded state (122x94x57mm) and its unfolded state (343x313x91mm) with propellers extended.
• اوچائي رکو: Maintains a consistent altitude, simplifying flight control.
• بي سر موڊ: Eliminates the need to adjust the drone's position before flight, as the forward direction is relative to the pilot.

  Image: Illustrates the Headless Mode feature of the TOZO Q1012 X8tw drone, showing directional arrows indicating that the drone will move relative to the controller's orientation, regardless of the drone's front-facing direction.

• ايف پي وي (پهريون شخص) View) with WiFi 720P HD Camera: Stream live video to your smartphone via WiFi.
• 6-محور گيرو: Provides stable flight and easy control.
• 3D 360-Degree Flips: Perform aerial stunts with a single button.
• 2.4Ghz 4-Channel Control: Ensures strong signal and precise control.

4. حفاظتي ھدايتون

• ڊرون کي کليل علائقن ۾ هلايو، ماڻهن، جانورن ۽ رڪاوٽن کان پري.
• Do not fly near airports or restricted airspace.
• Avoid flying in strong winds or adverse weather conditions.
• آڱريون ۽ وارن کي گھمندڙ پروپيلرن کان پري رکو.
• پڪ ڪريو ته بيٽري هر اڏام کان اڳ مڪمل طور تي چارج ٿيل آهي.
• Supervise children during drone operation.
• Do not modify the drone or its components.

5. سيٽ اپ

5.1 Drone Assembly

1. Unfold the Arms: Gently extend the four arms of the drone until they lock into position. Refer to the foldable design image in Section 3.
2. انسٽال ڪريو پروپيلر: Attach the propellers to the motor shafts, ensuring correct orientation (A and B propellers are typically marked and correspond to specific motor positions). Secure with screws if necessary.
3. لينڊنگ گيئر انسٽال ڪريو: Attach the landing gear to the bottom of the drone.

5.2 بيٽري لڳائڻ ۽ چارج ڪرڻ

1. ڊرون جي بيٽري چارج ڪريو: Connect the drone battery to the USB charging cable, then plug the USB cable into a USB power source (e.g., computer, USB wall adapter). The indicator light will show charging status and turn off when fully charged.
2. ڊرون بيٽري انسٽال ڪريو: Open the battery compartment on the drone and insert the fully charged battery. Connect the battery connector to the drone's power port. Close the compartment securely.
3. ٽرانسميٽر بيٽريون انسٽال ڪريو: Open the battery compartment on the remote transmitter and insert 4x AAA batteries (not included), observing polarity. Close the compartment.

5.3 ٽرانسميٽر اوورview

Image: A detailed diagram of the TOZO Q1012 X8tw drone's remote transmitter, labeling various controls such as the LCD display, accelerator/left and right rotatory rocker, front rear left and right rocker, fine-tuning buttons, power switch, light switch, speed toggle, and automatic landing/emergency stop buttons.

• LCD ڊسپلي: Shows flight information.
• Left Stick (Accelerator/Left & Right Rotatory Rocker): اوچائي (مٿي/هيٺ) ۽ گردش (کاٻي/ساڄي) کي ڪنٽرول ڪري ٿو.
• Right Stick (Front Rear Left & Right Rocker): اڳتي/پوئتي ۽ کاٻي/ساڄي حرڪت کي ڪنٽرول ڪري ٿو.
• Fine Tuning Buttons: Adjust drone drift for stable flight.
• پاور سوئچ: ٽرانسميٽر کي آن / بند ڪري ٿو.
• لائيٽ سوئچ: Controls drone LED lights.
• High/Intermediate/Low Speed Toggle: Changes flight speed.
• Automatic Landing Button: Press and hold for 2 seconds to initiate automatic landing.
• ايمرجنسي اسٽاپ: Press both bottom buttons simultaneously for emergency stop.

6. آپريٽنگ هدايتون

6.1 Pairing the Drone and Transmitter

1. ڊرون کي فليٽ، سطح جي مٿاڇري تي رکو.
2. ڊرون جي پاور سوئچ کي آن ڪريو. ڊرون جون اشاري جون بتيون چمڪينديون.
3. Turn on the transmitter's power switch.
4. Push the left throttle stick (accelerator) fully up, then pull it fully down. The drone lights will stop flashing and remain solid, indicating successful pairing.

6.2 حساب ڪتاب

After pairing, perform a gyroscope calibration for stable flight:

1. Ensure the drone is on a flat surface.
2. Push both control sticks down and to the right simultaneously (as shown in step 3 of the "How to Take Off" image). The drone lights will flash rapidly and then become solid, indicating successful calibration.

6.3 How to Take Off

Image: A six-step visual guide demonstrating the take-off procedure for the TOZO Q1012 X8tw drone, including pushing the throttle up and down for pairing, calibrating by pushing both sticks down-right, unlocking by pushing both sticks down-left, and finally pushing the left stick up to take off.

1. جوڙڻ: Push the throttle lever up (1), then down (2).
2. حساب ڪتاب: Push both control sticks down and to the right (3).
3. کوليو: Push both control sticks down and to the left (4). The propellers will start spinning slowly.
4. لاهڻ: Push the left throttle stick up to ascend (6).

6.4 فلائيٽ ڪنٽرول

• چڙهڻ/ هيٺ ڪرڻ: Use the left stick (throttle) up or down.
• اڳتي / پوئتي: Use the right stick up or down.
• Turn Left/Right (Yaw): Use the left stick left or right.
• Fly Left/Right (Roll): Use the right stick left or right.
• اوچائي رکو: Once the drone reaches a desired altitude, release the left stick, and the drone will attempt to maintain that height.
• بي سر موڊ: Press the Headless Mode button (refer to transmitter diagram). The drone will orient itself relative to the pilot, regardless of its front direction. Press again to exit.
• 360-Degree Flips: Press the 3D Flip button, then push the right stick in the desired flip direction.

6.5 لينڊنگ

• دستي لينڊنگ: Slowly pull the left throttle stick down until the drone lands.
• خودڪار لينڊنگ: Press and hold the automatic landing button on the transmitter for 2 seconds. The drone will descend and land automatically.

6.6 FPV and Camera Operation (via Phone WiFi Direct Control)

Image: Displays two methods of controlling the TOZO Q1012 X8tw drone: via the included transmitter with a phone monitor attached, or directly via phone WiFi control using a compatible iOS/Android app. It also notes that data is stored directly on the phone, eliminating the need for a TF card.

1. ايپ ڊائون لوڊ ڪريو ڳولھيو the official TOZO drone app on your smartphone's app store (iOS/Android).
2. Connect to Drone WiFi: Turn on the drone. On your smartphone, go to WiFi settings and connect to the drone's WiFi network (e.g., "TOZO-Q1012-XXXX").
3. ايپ لانچ ڪريو: Open the TOZO drone app. You should see a live FPV feed from the drone's camera.
4. Record Video/Take Photos: Use the controls within the app to start/stop video recording or take still photos. Captured media is stored directly on your phone.

7. سار سنڀال

• صفائي: Use a soft, dry cloth to clean the drone body and camera lens. Do not use harsh chemicals or solvents.
• پروپيلر متبادل: If a propeller is damaged, replace it with a new one from the spare parts. Ensure the correct propeller type (A or B) is installed on the corresponding motor.
• بيٽري جي سنڀال: بيٽرين کي ٿڌي، سڪل جاءِ تي رکو. اوور چارج يا اوور ڊسچارج نه ڪريو.
• اسٽوريج: When not in use for extended periods, remove batteries from both the drone and transmitter. Store the drone in a cool, dry environment.

8. مسئلا حل ڪرڻ

• Drone not responding to transmitter:
  • Ensure both drone and transmitter are powered on.
  • Re-pair the drone and transmitter (Section 6.1).
  • ٽرانسميٽر بيٽرين کي چيڪ ڪريو.
• Drone unstable during flight/drifting:
  • Perform gyroscope calibration (Section 6.2).
  • Use the fine-tuning buttons on the transmitter to correct drift.
  • Check for damaged propellers and replace if necessary.
• اسمارٽ فون تي ڪوبه ايف پي وي فيڊ ناهي:
  • Ensure the drone's WiFi is enabled and your phone is connected to it.
  • Restart the drone and the app.
  • Check app permissions on your phone.
• مختصر پرواز جو وقت:
  • Ensure the drone battery is fully charged.
  • Battery life may decrease over time; consider replacing old batteries.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

TOZO products come with a standard warranty. For detailed warranty information, technical support, or replacement parts, please visit the official TOZO webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو.

Official TOZO Store: Amazon تي TOZO اسٽور جو دورو ڪريو