رولينڊ روبڪس 44 4-ان/4-آئوٽ يو ايس بي آڊيو انٽرفيس هدايت نامو

تعارف

The Roland Rubix44 is a 4-in/4-out USB audio interface designed for musicians and producers. It offers high-fidelity sound with support for up to 24-bit/192kHz audio resolution, ensuring clear and defined recordings with extremely low noise. Its robust metal construction provides durability, while its compact size makes it suitable for both studio and portable use. The Rubix44 is compatible with Mac, PC, and iPad, providing versatile connectivity for various music production environments.

Key features include four low-noise mic preamps with XLR combo jacks, a Hi-Z input for guitars and other high-impedance sources, MIDI In/Out ports, and an onboard hardware compressor/limiter. Ground lifts are included for quiet operation, and large, easy-to-read indicators provide essential information at a glance.

سيٽ اپ ڪريو

Before connecting your Rubix44, ensure your computer or iPad meets the system requirements. Install the necessary drivers from the Roland website for optimal performance, especially for Windows users. Mac and iPad users may find it class-compliant, but driver installation is still recommended.

Connecting to Your Computer/iPad

1. Connect the Rubix44 to your computer using the provided USB cable. The interface can be bus-powered via USB.
2. For additional power stability or when connecting to an iPad, use a 5V DC power adapter (not always included, check package contents).

ڳنڍڻ مائڪروفون ۽ اوزار

• مائڪروفون: Use XLR cables to connect microphones to the INPUT 1L, 2R, 3L, or 4R combo jacks on the front panel.
• Guitars/Basses: Connect instruments with high impedance (e.g., electric guitars, basses) to INPUT 1L or 2R using a 1/4-inch TS cable. Activate the هاءِ-Z switch for the corresponding input.
• لائين-ليول ڊوائيسز: Connect keyboards, drum machines, or other line-level devices to any of the combo jacks using 1/4-inch TRS or TS cables.
• MIDI ڊوائيسز: Connect MIDI keyboards or controllers to the MIDI IN ۽ MIDI ٻاهر ports on the rear panel using standard 5-pin MIDI cables.

Operating the Rubix44

ان پٽ ڪنٽرول

• SENS (Sensitivity) Knobs: Adjust the input gain for each channel (1L, 2R, 3L, 4R). Turn clockwise to increase sensitivity. Monitor the signal indicators to avoid clipping.
• 48V فينٽم پاور: کي دٻايو 48V button to supply phantom power to condenser microphones connected to the XLR inputs. An indicator light will illuminate when active.
• Hi-Z Switch: Engage this switch for INPUT 1L or 2R when connecting high-impedance instruments like electric guitars or basses.
• COMP/LIMIT (Compressor/Limiter): The Rubix44 features a hardware compressor/limiter. Use the THRS (Threshold) knob to set the level at which compression/limiting begins. The COMP/LIMIT indicator lights up when active.

نگراني ۽ پيداوار

• س Mو مانيٽر: This switch allows you to hear your input signal directly through the outputs with zero latency. It can be set to مونو or اسٽريٽيو.
• OUTPUT Knobs:
  • وڏو آئوٽ knob controls the overall volume of the main outputs (1/2 and 3/4).
  • A separate knob controls the volume for the headphones output.
• سگنل اشارا: Bright, easy-to-read indicators show input signal levels, helping you monitor your audio and prevent clipping.

Official Product Video: Roland Rubix Series Overview

سار سنڀال

• صفائي: يونٽ جي ٻاهرين حصي کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. رگڙيندڙ صاف ڪندڙ يا محلولن کان پاسو ڪريو.
• اسٽوريج: Store the Rubix44 in a cool, dry place away from direct sunlight and extreme temperatures.
• ڪيبل جو انتظام: Ensure cables are not excessively bent or strained to prevent damage to the connectors and the unit.

مشڪلاتون

• No Sound/Weak Signal:
  • سڀ ڪيبل ڪنيڪشن چيڪ ڪريو.
  • ان پٽ کي يقيني بڻايو سينس knobs are adjusted correctly and not too low.
  • تصديق ڪريو ته 48V phantom power is engaged for condenser microphones.
  • جي تصديق ڪريو هاءِ-Z switch is active for high-impedance instruments.
  • Check your computer's sound settings and DAW (Digital Audio Workstation) to ensure the Rubix44 is selected as the input/output device.
• Humming or Noise:
  • مشغول ڪريو گرائونڊ لفٽ switch on the rear panel. This can help eliminate hum caused by ground loops.
  • Try connecting the unit to a different USB port or power outlet.
  • Ensure all cables are properly shielded and in good condition.
• ڊرائيور مسئلا:
  • Reinstall the latest drivers from the official Roland webسائيٽ.
  • ڪوشش ڪريو هڪ مختلف USB ڪيبل يا پورٽ.

وضاحتون

وارنٽي ۽ سپورٽ

For detailed warranty information and technical support, please refer to the official Roland website or contact their customer service. Registering your Rubix audio interface may also qualify you for special offers, such as a six-month Roland Cloud Pro membership.

وڌيڪ مدد لاء، دورو ڪريو جي Roland Store on Amazon or the official Roland support pages.