Amazon Basics مڊ-بئڪ آفيس ڪمپيوٽر ٽاسڪ ڊيسڪ چيئر (ماڊل GF-9390M-1) هدايت نامو

تعارف

This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

حفاظت جي ڄاڻ

خبردار:

• Always follow the assembly instructions provided in this user manual to ensure safe use.
• وڌ ۾ وڌ وزن جي گنجائش 275 پائونڊ (124.74 ڪلوگرام) کان وڌيڪ نه ڪريو.
• Be cautious of the swivel feature to prevent tripping.
• Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.

پيڪيج مواد

اسيمبلي شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• سيٽ کشن
• پوئتي کشن
• Gas Lift (Cylinder)
• Hardware (Screws, Hex Tool)
• Base (5-point star base)
• هٿيار (2)
• ڪاسٽر (5)
• Mechanism (for seat height and tilt)

سيٽ اپ ۽ اسيمبلي

Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.

1. Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
2. سلنڈر داخل ڪريو: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
3. سيٽ سان ميڪانيزم ڳنڍيو: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
4. Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
5. بازو بند ڪريو: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
6. پوئتي ڳنڍيو: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
7. سڀني پيچرن کي مضبوط ڪريو: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
8. Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.

آپريٽنگ هدايتون

Your Amazon Basics office chair offers several adjustable features for personalized comfort:

• سيٽ جي اوچائي ترتيب: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
• جھڪندڙ فنڪشن: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
• ٽِلٽ ٽينشن ايڊجسٽمينٽ: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• 360 درجا گھمڻ: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
• Rolling Casters: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.

سار سنڀال

To maintain the appearance and longevity of your chair:

• صفائي: اشتهار سان صاف ڪريوamp ڪپڙو. سخت ڪيميڪلز يا رگڙيندڙ صاف ڪندڙن کان پاسو ڪريو جيڪي مصنوعي چمڙي کي نقصان پهچائي سگهن ٿا.
• فاسٽنرز: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
• ڪاسٽر: هموار رولنگ کي يقيني بڻائڻ لاءِ ڪاسٽرن کي ملبي (وار، مٽي، وغيره) کان پاڪ رکو.

مشڪلاتون

If you encounter issues with your chair, consider the following:

• ڪرسي غير مستحڪم يا لڏپلاڻ واري محسوس ٿئي ٿي: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
• Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
• Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
• ڪاسٽر آساني سان نه ڦري رهيا آهن: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.