تعارف
This manual provides instructions for the Master Lock 5KA-A297 2-inch Keyed Alike Laminated Padlocks. These padlocks are designed for security in various applications, featuring durable construction and a keyed-alike system for convenience. Please read these instructions carefully before use to ensure proper operation and longevity of your product.
پيداوار ختمview
تصوير 1: A Master Lock 5KA-A297 laminated padlock shown with two brass keys. The padlock features a silver body with black accents and a chrome shackle. The word "COMMERCIAL" is visible on the black band near the shackle, and "Master" is visible on the lower black band.
The Master Lock 5KA-A297 padlocks are a set of seven 2-inch wide laminated padlocks, all operating with the same key (keyed alike to key #A297). Each padlock features:
- پائيدار تعمير: Laminated steel bodies provide strength, complemented by a hardened boron alloy shackle for enhanced cut resistance.
- ترقي يافته سيڪيورٽي: A 4-pin cylinder mechanism is designed to resist picking, and dual locking levers provide additional resistance against prying attempts.
- corrosion مزاحمت: Proprietary rustproofing is applied to extend the product's life, particularly in outdoor or damp ماحول.
- طول و عرض: Each padlock has a 2-inch (51mm) wide case, a 3/8-inch (10mm) shackle diameter, and a 1-inch (25mm) vertical shackle clearance. The horizontal shackle clearance measures 15/16 inch (24mm).
- Key Compatibility: For key duplication, compatible key blanks include Master Lock Key Blank K1BOX or Ilco Blank M1.
سيٽ اپ ڪريو
The Master Lock 5KA-A297 padlocks are ready for immediate use upon receipt. No assembly is required.
- پيڪ ڪريو: Carefully remove all padlocks and keys from their packaging.
- چڪاس ڪريو: Verify that all seven padlocks and their corresponding keys are present and in good condition.
- اهم سڃاڻپ: Note that all keys provided will operate all padlocks in this set, as they are keyed alike to key #A297.
- ٽيسٽ آپريشن: Before deployment, insert a key into each padlock and test its locking and unlocking mechanism to ensure smooth operation.
آپريٽنگ هدايتون
To Unlock the Padlock:
- Insert one of the provided keys into the keyway located at the bottom of the padlock.
- Turn the key clockwise approximately a quarter turn (90 degrees).
- Pull the shackle upwards to release it from the padlock body.
- Remove the key by turning it counter-clockwise back to its original position and pulling it out. The shackle will remain open until locked again.
To Lock the Padlock:
- پڪ ڪريو ته زنجيرو کليل پوزيشن ۾ آهي.
- Align the shackle with the openings in the padlock body.
- Push the shackle firmly downwards into the padlock body until you hear a click. This sound indicates the padlock is securely locked.
- Gently pull on the shackle to confirm it is locked. No key is required to lock the padlock.
سار سنڀال
Proper maintenance ensures the longevity and reliable operation of your Master Lock padlocks.
- لوڻ: Periodically apply a small amount of graphite lubricant or a silicone-based lubricant (avoid oil-based lubricants as they can attract dirt and gum up the mechanism) into the keyway and around the shackle mechanism. This helps maintain smooth operation and prevents corrosion.
- صفائي: Keep the padlock clean from dirt, dust, and debris. Use a soft cloth to wipe down the body and shackle.
- اسٽوريج: When not in use, store padlocks in a dry environment to further protect against moisture and rust.
- اهم سنڀال: Keep keys clean and avoid bending or damaging them. Store spare keys in a secure, accessible location.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| چاٻي داخل ڪرڻ يا موڙڻ ڏکيو آهي. | Dirt or debris in keyway; lack of lubrication; bent key. | Clean keyway with compressed air. Apply graphite or silicone lubricant. Inspect key for damage; use a different key if available. |
| Shackle is stiff or difficult to open/close. | Corrosion or dirt in the shackle mechanism; lack of lubrication. | Apply lubricant to the shackle entry points and work the shackle. Clean any visible debris. |
| Padlock does not lock when shackle is pushed down. | Obstruction in the locking mechanism; shackle not fully aligned. | Ensure shackle is properly aligned with the body holes. Check for any foreign objects preventing the shackle from fully engaging. |
وضاحتون
- برانڊ: ماسٽر لاڪ
- ماڊل نمبر: 5KA-A297
- تالا جو قسم: چاٻي تالا
- چاٻي ڏيڻ: Keyed Alike (Key #A297)
- مواد: Laminated Steel Body, Hardened Boron Alloy Shackle
- ختم ڪر: Laminated, Rustproofed
- ڪيس جي ويڪر: 2 انچ (51mm)
- ڇت جو قطر: 3/8 انچ (10 ملي ميٽر)
- Vertical Shackle Clearance: 1 انچ (25 ايم ايم)
- Horizontal Shackle Clearance: 15/16 انچ (24 ملي ميٽر)
- سلنڈر: 4-pin tumbler
- ٽڪرن جو تعداد: 7 تالا
- Item Weight (per padlock): تقريبن 0.8 پائونڊ (12.8 آونس)
- Product Dimensions (per padlock L x W x H): 2.1 x 3.1 x 1.3 انچ
- UPC: 071649024771
وارنٽي ڄاڻ
Master Lock products are manufactured to high standards. For specific warranty details, including terms and conditions, please refer to the official Master Lock website or contact their customer service directly. Warranty coverage typically addresses manufacturing defects.
ڪسٽمر سپورٽ
For further assistance, technical support, or to inquire about replacement parts or keys, please visit the official Master Lock webسائيٽ:
You can also find contact information for Master Lock customer service on their official corporate webسائيٽ.
